journal article·2021-05Open access

Microstructural evolution and properties of a Ti-Nb-Ta-Zr-O prepared by high-pressure torsion

Murillo Romero da Silva, Piter Gargarella, Athos Henrique Plaine, Josephine Zeisig, Simon Pauly, Uta Kühn, Claudemiro Bolfarini

Abstract

Abstract In this work, the Ti-29Nb-13Ta-4.6Zr-0.07O (TNTZO) alloy was processed by high-pressure torsion (HPT), and its microstructure, phase stability, elastic behavior, mechanical properties and deformation mechanisms were determined for samples prepared under different conditions. An increase in β-phase stability relative to martensite and a significant hardening was observed after severe plastic deformation. The increase in β-phase stability is attributed to the sharp increase in the system’s Gibbs free energy that occurs when the α"-laths reach a critical nanometer-size during the HPT processing. This system’s Gibbs free energy increase triggers the occurrence of the α"→ β reverse martensitic transformation. The greater hardness can be related to three factors: microstructural refinement; high dislocation density and stress-induced formation of the ω-phase. Plastic deformation is based on conventional slip, detwinning, stress-induced martensite formation, as well as the reverse martensitic transformation. The reverse martensitic transformation observed during HPT corresponds to a recently discovered mechanism that has not been well addressed in the literature until now. In this paper, this new mechanism is clearly detected and detailed discussed based on a systematic Rietveld refinement, in-depth microscopy, and calorimetry.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Lütjering · 2007
2. Titanium alloy production technology, market prospects and industry development10.1016/j.matdes.2010.09.011 ↗
3. Gum Metal thin films obtained by magnetron sputtering of a Ti-Nb-Zr-Ta target10.1016/j.msea.2016.07.096 ↗
4. First-principles calculations for development of low elastic modulus Ti alloys10.1103/PhysRevB.70.174113 ↗
5. Elastic modulus of biomedical titanium alloys by nano-indentation and ultrasonic techniques—a comparative study10.1016/j.msea.2007.12.029 ↗
6. Design of low modulus β-type titanium alloys by tuning shear modulus C4410.1016/j.jallcom.2018.02.259 ↗
7. Beta-type Ti-Nb-Zr-Cr alloys with large plasticity and significant strain hardening10.1016/j.matdes.2019.108064 ↗
8. A comparison of the fatigue behavior of cast Ti-7.5Mo with c.p. titanium, Ti-6Al-4V and Ti-13Nb-13Zr alloys10.1016/j.biomaterials.2004.09.007 ↗
9. Microstructural evolution and final properties of a cold-swaged multifunctional Ti–Nb–Ta–Zr–O alloy produced by a powder metallurgy route10.1016/j.msea.2013.03.029 ↗
10. Multifunctional alloys obtained via a dislocation-free plastic deformation mechanism10.1126/science.1081957 ↗
11. Effect of twinned-structure on deformation behavior and correlated mechanical properties in a metastable β-Ti alloy10.1016/j.jallcom.2019.152054 ↗
12. Effect of mode of deformation by rolling on texture evolution and yield locus anisotropy in a multifunctional β titanium alloy10.1016/j.msea.2012.04.077 ↗
13. Microstructure and elastic deformation behavior of β-type Ti-29Nb-13Ta-4.6Zr with promising mechanical properties for stent applications10.1016/j.jmrt.2019.06.047 ↗
14. Influence of the deformation rate on phase stability and mechanical properties of a Ti–29Nb–13Ta–4.6Zr–xO alloy analyzed by in situ high-energy X-ray diffraction during compression tests10.1557/jmr.2020.150 ↗
15. Microstructural softening induced adiabatic shear banding in Ti-23Nb-0.7Ta-2Zr-O gum metal10.1016/j.jmst.2020.03.042 ↗
16. Using high-pressure torsion for metal processing: fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
17. From porous to dense nanostructured β-Ti alloys through high-pressure torsion10.1038/s41598-017-13074-z ↗
18. Phase transformation and structure evolution of a Ti-45Al-7.5Nb alloy processed by high-pressure torsion10.1016/j.jallcom.2019.02.174 ↗
19. High resolution transmission electron microscopy study of the hardening mechanism through phase separation in a β-Ti-35Nb-7Zr-5Ta alloy for implant applications10.1016/j.actbio.2009.11.010 ↗
20. Mechanical properties, structural and texture evolution of biocompatible Ti-45Nb alloy processed by severe plastic deformation10.1016/j.jmbbm.2016.04.042 ↗
21. Heterogeneous structure and mechanical hardness of biomedical β-type Ti-29Nb-13Ta-4.6Zr subjected to high-pressure torsion10.1016/j.jmbbm.2012.02.022 ↗
22. Rietveld refinement guidelines10.1107/S0021889898009856 ↗
23. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
24. Structural properties, deformation behavior and thermal stability of martensitic Ti-Nb alloys
25. Studies on Ti-29Nb-13Ta-4.6Zr alloy for use as a prospective biomaterial10.1016/j.matpr.2019.05.018 ↗
26. Peculiar elastic behavior of Ti–Nb–Ta–Zr single crystals10.1016/j.actamat.2008.02.017 ↗
27. Deformation mechanism of ω-enriched Ti–Nb-based gum metal: dislocation channeling and deformation induced ω–β transformation10.1016/j.actamat.2015.08.047 ↗
28. Determination of (C11-C12) in Ti–36Nb–2Ta–3Zr–0.3O (wt%) (Gum metal)10.1016/j.scriptamat.2008.05.022 ↗
29. Elastic constants of single crystalline β-Ti70Nb3010.1016/j.scriptamat.2011.10.039 ↗
30. Tailoring the microstructure and mechanical properties of metastable Ti–29Nb–13Ta-4.6Zr alloy for self-expansible stent applications10.1016/j.jallcom.2019.06.049 ↗
31. M. Morinaga, M. Kato, T. Kamimura, M. Fukumoto, I. Harada, K. Kubo, Theoretical Design of β-Type Titanium Alloys., in: Proceedings of Seventh World Conference on Titanium, Titanium' 92, Science and Technology, San Diego, CA, USA, 1992, pp. 217–224.
32. Nanostructured Ti29.7Ni50.3Hf20 high temperature shape memory alloy processed by high-pressure torsion10.1016/j.jmst.2020.01.065 ↗
33. Formation of {332}〈113〉β twins from parent {130}〈310〉α″ plastic twins in a full α″ Ti-Nb alloy by annealing10.1016/j.matchar.2018.09.034 ↗
34. Formation of an ultrafine-grained structure during equal-channel angular pressing of a β-titanium alloy with low phase stability10.1016/j.scriptamat.2009.02.043 ↗
35. Deformation-induced nanostructuring in a Ti–Nb–Ta–In β alloy
36. Nanocrystalline body-centred cubic beta-titanium alloy processed by high-pressure torsion10.3139/146.110229 ↗
37. Deformation-induced grain refinement and amorphization in Ti-10V-2Fe-3Al alloy10.1007/s11661-011-0856-z ↗
38. Giant thermal expansion and α-precipitation pathways in Ti-alloys10.1038/s41467-017-01578-1 ↗
39. Modeling the temperature rise in high-pressure torsion10.1016/j.msea.2013.11.015 ↗
40. Microhardness evolution and mechanical characteristics of commercial purity titanium processed by high-pressure torsion10.1016/j.msea.2014.07.030 ↗
41. Formation of nanocrystalline β structure in metastable beta Ti alloy during high pressure torsion: the role played by stress induced martensitic transformation10.1016/j.actamat.2015.06.042 ↗
42. Martensitic phase transformations in nanocrystalline NiTi studied by TEM10.1016/j.actamat.2003.08.036 ↗
43. Heterogeneous grain refinement of biomedical Ti–29Nb–13Ta–4.6Zr alloy through high-pressure torsion
44. Orientation and phase mapping in the transmission electron microscope using precession-assisted diffraction spot recognition: state-of-the-art results10.1111/jmi.12065 ↗
45. Development of thermo-mechanical processing for fabricating highly durable beta-type Ti-Nb-Ta-Zr rod for use in spinal fixation devices10.1016/j.jmbbm.2012.01.011 ↗
46. Effect of terminal functional groups of silane layers on adhesive strength between biomedical Ti-29Nb-13Ta-4.6Zr alloy and segment polyurethanes10.1016/j.surfcoat.2011.12.044 ↗
47. Change of Young’s modulus of cold-deformed pure iron in a tensile test10.1007/s11661-005-0006-6 ↗