Aging behavior of Haynes® 282® wrought nickel superalloy subjected to a cold pre-deformation by differential speed rolling
Source abstract
Abstract
The mechanical response of Haynes 282, a wrought gamma prime strengthened nickel based superalloy, is tailored by using both a cold deformation processing and a post straining heat treatment including a two step aging. In this work, the effect of the applied cold pre deformation by conventional equal speed rolling ESR or differential speed rolling DSR methods on the aging behavior of Haynes 282 superalloy, is examined for the first time. For this reason, the solid solution annealed alloy was subjected to 50 pct. nominal cold thickness reduction by either ESR or DSR methods, followed by a two step heat treatment at 1010C for 2h and 780C for 8h. The material structural evolution on each processing step was characterized by using scanning electron microscopy, electron backscatter diffraction and transmission electron microscopy methods. Corresponding mechanical properties were examined in static tensile tests performed on non standard miniaturized specimens. It was found that, the introduction of a shear strain by rolls speed differentiation in the cold rolling process results in a more efficient strain hardening of the alloy in the as deformed state and an intensive grain refinement upon the post deformation annealing. Consequently, the DSR provides a higher room temperature mechanical strength obtained in both aging steps, as compared to the non deformed and conventionally cold rolled counterparts. Furthermore, noticeable differences in terms of stability of crystallographic orientations for ESRed or DSRed and heat treated alloy, were noted.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. L.M. Pike , 2006. Haynes®282® alloy – a new wrought superalloy designed for improved creep strength and formability. Proceedings of ASME Tubo Expo 2006, Power for Land, Sea and Air 4 p. 1031–1039.10.1115/GT2006-91204 ↗
2. HAYNES® 282® alloy
3. Fossil energy
4. Identification of Mo-based precipitates in Haynes 282 superalloy10.1007/s11661-017-3999-8 ↗
5. C. Joseph M. , Hörnqvist R. , Brommesson C. , Persson Influence of carbide distribution on ductility of Haynes®282® Forgings: Proceedings of the 13th Intenational Symposium of Superalloys, 523–529, 2016.10.7449/Superalloys/2016/Superalloys_2016_523_529 ↗
6. C. Joseph , M. Hörnqvist , R. Brommesson , C. Persson , Anisotropy of room temperature ductility in Haynes®282® forgings 8th International Symposium on Superalloy 718 and Derivatives, 2016a.
7. Influence of heat treatment on the microstructure and tensile properties of Ni-base superalloy Haynes® 282®10.1016/j.msea.2016.10.048 ↗
8. Correlation of precipitate evolution with Vickers hardness in Haynes® 282® superalloy: In-situ high-energy SAXS/WAXS investigation10.1016/j.msea.2017.11.035 ↗
9. Microstructure and hardness evolution in Haynes® 282® nickel based superalloy during multi-variant aging heat treatment10.1007/s11665-019-3886-0 ↗
10. The effect of cold rolling degree on microstructure, crystallographic texture and mechanical properties of Haynes® 282® wrought nickel superalloy
11. On the considerability of DSR (Differential Speed Rolling) as a severe plastic deformation method: on the considerability of DSR10.1002/adem.201600722 ↗
12. Continuous differential speed rolling for grain refinement of metals: processing, microstructure, and properties10.1080/10408436.2018.1525528 ↗
13. Differential Speed Rolling: A New Method for a Fabrication of Metallic Sheets with Enhanced Mechanical Properties
14. On the microstructure homogeneity of AA6061 alloy after cross-shear deformations10.1002/adem.201700152 ↗
15. A cross-shear deformation for optimizing the strength and ductility of AZ31 magnesium alloys10.1038/srep29954 ↗
16. Electron backscatter diffraction study on microstructure, texture, and strain evolution in armco iron severely deformed by the differential speed rolling method10.1007/s11661-015-2760-4 ↗
17. Differential speed rolling of Ni3Al based intermetallic alloy—analysis of the deformation process10.1016/j.matlet.2014.09.129 ↗
18. Characterization of the microstructures and the shape memory properties of the Fe-Mn-Si-Cr-Ni-C shape memory alloy after severe plastic deformation by differential speed rolling and subsequent annealing10.1016/j.matchar.2017.11.055 ↗
19. Characterization of high strength nickel thin sheets fabricated by differential speed rolling method10.1016/j.matchar.2017.06.006 ↗
20. Development of microstructures and mechanical properties in differential speed rolled Ni-30Cr alloy. Korean
21. Effect of precipitates on properties of cold-rolled Al–Mg–Si–Sc–Zr alloy with higher temperature aging10.1080/02670836.2018.1444922 ↗
22. Effect of pre-straining on the aging behavior and mechanical properties of an Al–Cu–Mg–Ag alloy10.1016/j.msea.2014.11.094 ↗
23. Influence of cold rolling degree and ageing treatments on the precipitation hardening of 2024 and 7075 alloys10.1007/s11043-012-9182-0 ↗
24. Effect of cold rolling on aging precipitation behavior and mechanical properties of Cu–15Ni–8Sn alloy10.1016/j.jallcom.2020.156275 ↗
25. Enhanced strength in Cu-Ag-Zr alloy by combination of cold working and aging10.1007/s11665-014-0882-2 ↗
26. Haynes, 2019. 〈http://haynesintl.com/docs/default-source/pdfs/new-alloy-brochures/high-temperature-alloys/brochures/282-brochure.pdf?Sfvrsn=20〉, Accessed on 08/11/2020.
27. Microstructure and strength of nickel at large strains10.1016/S1359-6454(00)00082-3 ↗
28. Effect of roll speed ratio on deformation characteristics of if steel subjected to differential speed rolling10.1007/s12540-013-3033-7 ↗
29. Microstructure of carbides at grain boundaries in nickel based superalloys10.1016/S1005-0302(12)60169-8 ↗
30. Process parameter influence on texture heterogeneity in asymmetric rolling of aluminium sheet alloys10.1007/s12289-016-1330-7 ↗
31. Energies de défaut d′empilement et mécanismes de déformation dans les alliages nickel-chrome10.1080/14786439808206589 ↗
32. Formation of {111} fibre texture in recrystallised aluminium sheet10.1179/026708301101508990 ↗
33. The reduction of planar anisotropy by texture modification through asymmetric rolling and annealing in AA575410.1016/j.msea.2005.04.027 ↗
34. Effects of cold rolling on the precipitation kinetics and the morphology evolution of intermediate phases in Inconel 718 alloy10.1016/j.jallcom.2015.07.149 ↗
35. Effect of grain refinement and dispersion of particles and reinforcements on mechanical properties of metals and metal matrix composites through high-ratio differential speed rolling10.3390/ma13184159 ↗
36. Synthesis of high-strain-rate superplastic magnesium alloy sheets using a high-ratio differential speed rolling technique10.1016/j.scriptamat.2010.06.011 ↗
37. Refinement of the icosahedral quasicrystalline phase and the grain size of Mg–9.25Zn–1.66Y alloy by high-ratio differential speed rolling10.1016/j.scriptamat.2015.03.004 ↗
38. Development of biodegradable Mg–Ca alloy sheets with enhanced strength and corrosion properties through the refinement and uniform dispersion of the Mg2Ca phase by high-ratio differential speed rolling10.1016/j.actbio.2014.09.029 ↗
39. Dispersion of TiC particles in an in situ aluminum matrix composite by shear plastic flow during high-ratio differential speed rolling10.1016/j.msea.2012.08.106 ↗