journal article·2021-02

Vertically rooting carbon nanotubes on cobalt-loaded hollow Titanium Dioxide spheres as conductive multifunctional sulfur hosts for superior lithium-sulfur performance

Xiao Zhang, You Li, Jingde Li, Aizhong Jia, Daolai Sun, Yanji Wang

Publisher page

Abstract

Abstract The rechargeable lithium-sulfur (Li–S) batteries have been regarded as the most promising alternatives for Li-ion batteries. However, the poor conductivity, the large volume expansion of sulfur, and the “shuttle effect” of polysulfides lead to the rapid capacity decay of sulfur cathodes, which impedes the practical application of Li–S batteries. Herein, a novel three-dimensional (3D) hierarchical structured high-efficiency sulfur host (Co-CNTs@TiO2), which was assembled by hollow TiO2 spheres and vertically rooted carbon nanotubes (CNTs) network framework, was developed by simple chemical vapor deposition (CVD) method. The 3D CNTs network promoted long-range conductivity and efficiently exposed the Co active sites. Remarkably, the Co particles acted as adsorptive and catalytic sites, which were effective for chemical fixation and conversion of polysulfides. Meanwhile, the hollow and porous structures of Co-CNTs@TiO2 microspheres were conducive to the buffering of volume change during the cycling process, and could physically encapsulate polysulfides. Consequently, the S/Co-CNTs@TiO2 cathode can deliver a high initial specific capacity of 1134.9 mAh g−1 at 0.2C, remarkable long-term cycling stability over 500 cycles with a low capacity fading rate of 0.072% per cycle at 1.0C, as well as excellent performance under high sulfur loading up to 5.9 mg cm−2.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Nanostructured metal oxides and sulfides for lithium-sulfur batteries
2. “Pea-pod-like” nitrogen-doped hollow porous carbon cathode hosts decorated with polar titanium dioxide nanocrystals as efficient polysulfide reservoirs for advanced lithium-sulfur batteries10.1039/C8TA06288A ↗
3. A review of atomic layer deposition providing high performance lithium sulfur batteries10.1016/j.jpowsour.2016.10.097 ↗
4. CaO-templated growth of hierarchical porous graphene for high-power lithium-sulfur battery applications10.1002/adfm.201503726 ↗
5. Natural vermiculite enables high-performance in lithium-sulfur batteries via electrical double layer effects10.1002/adfm.201902820 ↗
6. Interlayer material selection for lithium-sulfur batteries10.1016/j.joule.2019.01.003 ↗
7. Nanoporous Li2S and MWCNT-linked Li2S powder cathodes for lithium-sulfur and lithium-ion battery chemistries10.1039/C3TA14161F ↗
8. Interface enhanced well-dispersed Co9S8 nanocrystals as an efficient polysulfide host in lithium-sulfur batteries10.1016/j.jechem.2020.01.003 ↗
9. Lithium iodide as a promising electrolyte additive for lithium-sulfur batteries: mechanisms of performance enhancement10.1002/adma.201404194 ↗
10. Calendering of free-standing electrode for lithium-sulfur batteries with high volumetric energy density10.1016/j.carbon.2016.10.035 ↗
11. Recent advances of polar transition-metal sulfides host materials for advanced lithium-sulfur batteries
12. Synthesis of carbon coated Fe3O4 grown on graphene as effective sulfur-host materials for advanced lithium/sulfur battery10.1016/j.jpowsour.2019.226901 ↗
13. Towards stable lithium-sulfur battery cathodes by combining physical and chemical confinement of polysulfides in core-shell structured nitrogen-doped carbons10.1016/j.carbon.2020.01.046 ↗
14. Controllable synthesis of mesoporous carbon microspheres with renewable water glass as a template for lithium-sulfur batteries10.1016/j.jcis.2019.06.101 ↗
15. MOFs-derived nitrogen-doped carbon interwoven with carbon nanotubes for high sulfur content lithium-sulfur batteries10.1016/j.apsusc.2019.143773 ↗
16. A facile and effective sulfur loading method: direct drop of liquid Li2S8 on carbon coated TiO2 nanowire arrays as cathode towards commercializing lithium-sulfur battery10.1016/j.ensm.2018.11.020 ↗
17. Facet-tailoring five-coordinated Ti sites and structure-optimizing electron transfer in a bifunctional cathode with titanium nitride nanowire array to boost the performance of Li2S6-based lithium-sulfur batteries10.1016/j.ensm.2019.12.032 ↗
18. A three-dimensional conductive cross-linked all-carbon network hybrid as a sulfur host for high performance lithium-sulfur batteries10.1016/j.jcis.2019.05.042 ↗
19. Hierarchical vine-tree-like carbon nanotube architectures: in-situ CVD self-assembly and their use as robust scaffolds for lithium-sulfur batteries10.1002/adma.201402488 ↗
20. Exceptional adsorption and catalysis effects of hollow polyhedra/carbon nanotube confined CoP nanoparticles superstructures for enhanced lithium-sulfur batteries
21. Large-scale fabrication of reduced graphene oxide-sulfur composite films for flexible lithium-sulfur batteries10.1016/j.jechem.2019.03.034 ↗
22. Graphene-Li2S-carbon nanocomposite for lithium-sulfur batteries10.1021/acsnano.5b06716 ↗
23. Promoting polysulfide redox reactions and improving electronic conductivity in lithium-sulfur batteries via hierarchical cathode materials of graphene-wrapped porous TiO2 microspheres with exposed (001) facets10.1039/C8TA05573D ↗
24. Nanosized Fe7S8 with high surface area as polysulfide capturer combined with graphene for Li-S battery cathode10.1016/j.electacta.2019.07.023 ↗
25. Hollow carbon nanoballs coupled with ultrafine TiO2 nanoparticles as efficient sulfur hosts for lithium-sulfur batteries10.1021/acs.iecr.9b03393 ↗
26. Pitch-derived yolk-shell-structured carbon microspheres as efficient sulfur host materials and their application as cathode material for Li-S batteries10.1016/j.cej.2019.05.038 ↗
27. Preparation of SnO2@rGO/CNTs/S composite and application for lithium-sulfur battery cathode material10.1016/j.apsusc.2018.08.038 ↗
28. Insight of enhanced redox chemistry for porous MoO2 carbon-derived framework as polysulfide reservoir in lithium-sulfur batteries10.1021/acsami.8b15176 ↗
29. A sulfur host based on titanium monoxide@carbon hollow spheres for advanced lithium-sulfur batteries10.1038/ncomms13065 ↗
30. Hollow carbon spheres with TiO2 encapsulated sulfur and polysulfides for long-cycle lithium-sulfur batteries10.1016/j.cej.2017.08.006 ↗
31. Absorption mechanism of carbon-nanotube papertitanium dioxide as a multifunctional barrier material for lithium-sulfur batteries10.1007/s12274-015-0812-0 ↗
32. A thin multifunctional coating on a separator improves the cyclability and safety of lithium sulfur batteries10.1039/C7SC01961K ↗
33. Oxygen-deficient titanium dioxide as a functional host for lithium-sulfur batteries10.1039/C9TA01598A ↗
34. Hollow multi-shelled structural TiO2-x with multiple spatial confinement for long-life lithium-sulfur batteries10.1002/anie.201903295 ↗
35. Porphyrin organic framework hollow spheres and their applications in lithium-sulfur batteries
36. Porous CNTs/Co composite derived from zeolitic imidazolate framework: a lightweight, ultrathin, and highly efficient electromagnetic wave absorber10.1021/acsami.6b12178 ↗
37. TiO2 and Co nanoparticle-decorated carbon polyhedra as efficient sulfur host for high-performance lithium-sulfur batteries
38. One-pot fabrication of crumpled N-doped graphene anchored with cobalt for high-performance lithium-sulfur batteries10.1002/celc.202000182 ↗
39. Vertically rooting multifunctional tentacles on carbon scaffold as efficient polysulfide barrier toward superior lithium-sulfur batteries
40. Effective exposure of nitrogen heteroatoms in 3D porous graphene framework for oxygen reduction reaction and lithium-sulfur batteries10.1016/j.jechem.2017.09.014 ↗
41. Graphitic carbon conformal coating of mesoporous TiO2 hollow spheres for high-performance lithium ion battery anodes10.1021/jacs.5b08743 ↗
42. Strong lithium polysulfides chemical trapping of TiC-TiO2/S composite for long-cycle lithium-sulfur batteries10.1016/j.electacta.2018.12.075 ↗
43. Aerosol assisted chemical vapor deposition of conductive and photocatalytically active tantalum doped titanium dioxide films10.1039/C4TA01618A ↗
44. Enhancing catalytic activity of titanium oxide in lithium-sulfur batteries by band engineering
45. Efficient solar hydrogen production coupled with organics degradation by a hybrid tandem photocatalytic fuel cell using a silicon-doped TiO2 nanorod array with enhanced electronic properties10.1016/j.jhazmat.2019.121425 ↗
46. Promoting polythionate intermediates formation by oxygen-deficient manganese oxide hollow nanospheres for high performance lithium-sulfur batteries10.1016/j.cej.2019.03.078 ↗
47. Fabrication of Ti3+ doped TiO2 coated Mn3O4 nanorods with voids and channels for lithium storage10.1016/j.cej.2019.04.023 ↗
48. Synthesis of hydrogenated TiO2-reduced-graphene oxide nanocomposites and their application in high rate lithium ion batteries10.1039/C4TA00657G ↗
49. β-FeOOH interlayer with abundant oxygen vacancy toward boosting catalytic effect for lithium sulfur batteries10.3389/fchem.2020.00309 ↗
50. Nanoarchitecture of MOF-derived nanoporous functional composites for hybrid supercapacitors10.1039/C7TA03356G ↗
51. Three-dimensional TiO2-B nanotubes/carbon nanotubes intertwined network as sulfur hosts for high performance lithium-sulfur batteries10.1016/j.jpowsour.2018.08.004 ↗
52. TiO2 nanoparticles incorporation in carbon nanofiber as a multi-functional interlayer toward ultralong cycle-life lithium-sulfur batteries10.1016/j.jallcom.2019.02.236 ↗
53. Promoting polysulfide conversion by catalytic ternary Fe3O4/carbon/graphene composites with ordered microchannels for ultrahigh-rate lithium-sulfur batteries10.1039/C9TA06489C ↗
54. Efficient polysulfides anchoring for Li-S batteries: combined physical adsorption and chemical conversion in V2O5 hollow spheres wrapped in nitrogen-doped graphene network10.1016/j.cej.2019.122189 ↗
55. Synthesis of nitrogen-doped oxygen-deficient TiO2-x/reduced graphene oxide/sulfur microspheres via spray dying process for lithium-sulfur batteries10.1016/j.electacta.2019.134968 ↗
56. Electrochemical phase evolution of metal-based pre-catalysts for high-rate polysulfide conversion10.1002/anie.202003136 ↗
57. Three-dimensional hierarchical porous TiO2/graphene aerogels as promising anchoring materials for lithium-sulfur batteries10.1016/j.electacta.2018.09.109 ↗
58. Powering lithium-sulfur battery performance by propelling polysulfide redox at sulfiphilic hosts10.1021/acs.nanolett.5b04166 ↗
59. Co3O4-NP embedded mesoporous carbon rod with enhanced electrocatalytic conversion in lithium-sulfur battery10.1038/s41598-018-34195-z ↗
60. Capture and catalytic conversion of polysulfides by in situ built TiO2-MXene heterostructures for lithium-sulfur batteries10.1002/aenm.201900219 ↗
61. Large-scaled covalent triazine framework modified separator as efficient inhibit polysulfide shuttling in Li-S batteries10.1016/j.cej.2019.121977 ↗
62. Low-bandgap Se-deficient antimony selenide as a multifunctional polysulfide barrier toward high-performance lithium-sulfur batteries
63. Atomic layer deposited TiO2 on a nitrogen-doped graphene/sulfur electrode for high performance lithium-sulfur batteries10.1039/C5EE03902A ↗
64. Bi-structural fibers of carbon nanotube coated with nitrogen/oxygen dual-doped porous carbon layer as superior sulfur host for lithium-sulfur batteries10.1016/j.jallcom.2019.04.192 ↗
65. Freestanding sulfur-graphene oxide/carbon composite paper as a stable cathode for high performance lithium-sulfur batteries10.1016/j.electacta.2018.12.165 ↗
66. Construction of oxygen-deficient La(OH)3 nanorods wrapped by reduced graphene oxide for polysulfide trapping toward high-performance lithium/sulfur batteries10.1021/acsami.9b06904 ↗
67. Ammonia cation-assisted bubble template for synthesizing hollow TiO2 nanospheres and their application in lithium ion storage10.1039/C4RA14476G ↗
68. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
69. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
70. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗