Effect of YSZ sol-gel coating on interaction of Crofer22 APU with sealing glass for solid oxide fuel/electrolysis cell
Source abstract
Abstract
Abstract Interactions between the metal interconnect and glass sealant in the solid oxide cells stack are critical to retaining the system integrity. To address this issue, in the current study, 8YSZ coating is applied on the Crofer22 APU steel via sol-gel and dip-coating method. Dense and continuous 8YSZ coatings are obtained on Crofer22 APU substrates. X-ray diffraction and Raman spectroscopy results show that both cubic and tetragonal structures of 8YSZ are formed. A glass-based sealing paste is applied on bare and 8YSZ coated Crofer22 APU steel. The interfacial compatibility and chemical stability of steel/glass and steel/8YSZ/glass joint couples are investigated using SEM and EDS line scan analysis after the sealing process as well as 1000 h (10 thermal cycles) aging at 800 °C in air atmospheres. Very good compatibility is found between the coated steel and the glass. No significant interactions, cracks formation, or failure are observed at both steel/8YSZ and 8YSZ/glass interfaces, suggesting that the YSZ protective layer can effectively act as a barrier to interdiffusion of metal and glass elements. Finite element analysis shows that the generated residual stresses in the presence of the coating layer are not significant to be detrimental for the examined interfaces.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. Manufacture of Co-containing coating on AISI430 stainless steel via pack cementation approach for SOFC interconnect10.1016/j.ijhydene.2019.09.144 ↗
2. Ex-situ experimental benchmarking of solid oxide fuel cell metal interconnects10.1016/j.jpowsour.2019.226900 ↗
3. Comparison of MnCo2O4 coated Crofer 22 H, 441, 430 as interconnects for intermediate-temperature solid oxide fuel cell stacks10.1016/j.jallcom.2019.153229 ↗
4. Room- and high-temperature torsional shear strength of solid oxide fuel/electrolysis cell sealing material10.1016/j.ceramint.2018.10.134 ↗
5. Improving oxygen electrodes by infiltration and surface decoration10.1149/09101.1413ecst ↗
6. Ceramic fuel cells10.1111/j.1151-2916.1993.tb03645.x ↗
7. A novel Ag based sealant for solid oxide cells with a fully tunable thermal expansion10.1016/j.jallcom.2020.154608 ↗
8. Seal glass for solid oxide fuel cells10.1016/j.jpowsour.2010.06.003 ↗
9. Characteristics of a SiO2–B2O3–Al2O3–BaCO3–PbO2–ZnO glass–ceramic sealant for SOFCs10.1016/j.jallcom.2006.05.105 ↗
10. Crystallization kinetics and phase transformation of glass-ceramic seals for solid oxide fuel cell application10.1016/j.jallcom.2019.01.285 ↗
11. Thermal cycle stability of BaO–B2O3–SiO2 sealing glass10.1016/j.jpowsour.2009.06.018 ↗
12. Chemical interactions of barium–calcium–aluminosilicate-based sealing glasses with oxidation resistant alloys10.1016/S0167-2738(03)00160-7 ↗
13. Novel refractory alkaline earth silicate sealing glasses for planar solid oxide fuel cells10.1149/1.2733868 ↗
14. Degradation phenomena in the cathode of a solid oxide fuel cell with an alloy separator10.1016/0378-7753(94)02172-Y ↗
15. Selection and evaluation of heat-resistant alloys for SOFC interconnect applications10.1149/1.1595659 ↗
16. Development of MnCoO coating with new aluminizing process for planar SOFC stacks10.1016/j.ijhydene.2010.04.110 ↗
17. Compliant alkali silicate sealing glass for solid oxide fuel cell applications: the effect of protective alumina coating on electrical stability in dual environment10.1016/j.ijhydene.2012.08.084 ↗
18. Improving the interface adherence at sealings in solid oxide cell stacks10.1557/jmr.2018.459 ↗
19. Effect of aluminizing of Cr-containing ferritic alloys on the seal strength of a novel high-temperature solid oxide fuel cell sealing glass10.1016/j.jpowsour.2008.09.004 ↗
20. Compliant alkali silicate sealing glass for solid oxide fuel cell applications: combined stability in isothermal ageing and thermal cycling with YSZ coated ferritic stainless steels10.1016/j.jpowsour.2011.09.027 ↗
21. Compliant alkali silicate sealing glass for solid oxide fuel cell applications: the effect of protective YSZ coating on electrical stability in dual environment10.1016/j.jpowsour.2011.11.017 ↗
22. Electrical stability of a novel sealing glass with (Mn,Co)-spinel coated Crofer22APU in a simulated SOFC dual environment10.1016/j.jpowsour.2010.03.052 ↗
23. Seal glass compatibility with bare and (Mn,Co)3O4 coated Crofer 22 APU alloy in different atmospheres10.1016/j.jpowsour.2010.07.084 ↗
24. Compatibility of a seal glass with (Mn,Co)3O4 coated interconnects: effect of atmosphere10.1016/j.ijhydene.2010.05.070 ↗
25. Performance of a glass-ceramic sealant in a SOFC short stack10.1016/j.ijhydene.2012.07.025 ↗
26. Novel glass-ceramic composition as sealant for SOFCs10.1111/jace.13219 ↗
27. Electrophoretic deposition of Mn1.5Co1.5O4 on metallic interconnect and interaction with glass-ceramic sealant for solid oxide fuel cells application10.1016/j.jpowsour.2015.01.120 ↗
28. Sealing performance and chemical compatibility of SrO–La2O3–Al2O3–SiO2 glasses with bare and coated ferritic alloy10.1016/j.ceramint.2016.06.040 ↗
29. Effect of intermediate nickel layer on seal strength and chemical compatibility of glass and ferritic stainless steel in oxidizing environment for solid oxide fuel cells10.1016/j.ijhydene.2015.10.023 ↗
30. Interactions near the triple-phase boundaries metal/glass/air in planar solid oxide fuel cells10.1016/j.ijhydene.2017.01.065 ↗
31. Mn1.5Co1.5O4 protective coating on Crofer22APU produced by thermal co-evaporation for SOFCs10.1016/j.matlet.2012.12.079 ↗
32. Interface stability between bare, Mn Co spinel coated AISI 441 stainless steel and a diopside-based glass-ceramic sealant10.1016/j.ijhydene.2017.11.150 ↗
33. Interfacial interactions between an alkali-free borosilicate viscous sealing glass and aluminized ferritic stainless steel10.1016/j.jpowsour.2013.11.018 ↗
34. Post-test characterization of metallic materials and adjacent components in an SOFC stack after 34,000 h operation at 700 °C10.1002/fuce.201800050 ↗
35. Chemical interaction between glass–ceramic sealants and interconnect steels in SOFC stacks10.1016/j.jpowsour.2005.05.046 ↗
36. Effect of YSZ coatings as diffusion barrier between glass sealing and steel10.1149/07801.1749ecst ↗
37. Thermal cycle stability of sealing glass for 8YSZ coated Cr-containing metal interconnect
38. Fracture energies of brittle sealants for planar solid oxide fuel cells10.1002/9780470291245.ch32 ↗
39. Fabrication and characterization of TiO2 deposited black electroless Ni-P solar absorber10.1016/j.apsusc.2019.143632 ↗
40. Fabrication and sealing performance of rare-earth containing glass–ceramic seals for intermediate temperature solid oxide fuel cell applications10.1016/j.ceramint.2013.12.103 ↗
41. Brinker · 2013
42. 2010
43. Stable glass seals for intermediate temperature (IT) SOFC applications
44. Effects of thermal aging on thermo-mechanical behavior of a glass sealant for solid oxide cell applications10.1016/j.jeurceramsoc.2014.02.004 ↗
45. Room- and high-temperature flexural strength of a stable solid oxide fuel/electrolysis cell sealing material10.1016/j.ceramint.2018.09.236 ↗
46. Finite element optimization of sample geometry for measuring the torsional shear strength of glass/metal joints10.1016/j.ceramint.2019.10.221 ↗
47. The analysis of torsional shear strength test of sealants for solid oxide fuel cells10.1016/j.ceramint.2017.06.128 ↗
48. Design of molecular structure and synthetic approaches to single-source precursors in the sol-gel technology
49. Sol-gel synthesis of hybrid materials10.1007/BF02749920 ↗
50. Sol-gel synthesis and NMR characterization of ceramics10.1016/0272-8842(95)00133-6 ↗
51. The crystal structure of tetragonal ZrO210.1107/S0365110X62003114 ↗
52. Aerogel synthesis of yttria-stabilized zirconia by a non-alkoxide Sol−Gel route10.1021/cm0503679 ↗
53. Structural disorder and phase transitions in ZrO2-Y2O3 system10.1016/0022-3697(81)90032-9 ↗
54. A non-alkoxide Sol−Gel method for the preparation of homogeneous nanocrystalline powders of La 0.85 Sr 0.15 MnO 310.1021/cm052301j ↗
55. Mechanical loss, creep, diffusion and ionic conductivity of ZrO2-8 mol%Y2O3 polycrystals10.1016/S0955-2219(99)00162-4 ↗
56. Size effects on the stabilization of ultrafine zirconia nanoparticles10.1021/cm021233n ↗
57. Infrared and Raman spectra of zirconia polymorphs10.1111/j.1151-2916.1971.tb12283.x ↗
58. Nanocrystalline zirconia-yttria system–a Raman study10.1016/j.matlet.2005.10.102 ↗
59. A chemical diffusion model for partitioning of transition elements in oxide scales on alloys10.1080/14786437208226960 ↗
60. Electronic properties of transition-metal oxides-II10.1016/0022-3697(57)90035-5 ↗
61. Structure and conductivity of thermally grown scales on ferritic Fe-Cr-Mn steel for SOFC interconnect applications10.1149/1.1797031 ↗
62. Effect of pre-oxidation and environmental aging on the seal strength of a novel high-temperature solid oxide fuel cell (SOFC) sealing glass with metallic interconnect10.1016/j.jpowsour.2008.06.020 ↗
63. Processing and characterization of ultra-thin yttria-stabilized zirconia (YSZ) electrolytic films for SOFC10.1016/j.ssi.2005.10.010 ↗
64. Phase relationships in the zirconia-yttria system10.1007/BF01031853 ↗
65. Phase evolution in yttria-stabilized zirconia thermal barrier coatings studied by Rietveld refinement of X-ray powder diffraction patterns10.1111/j.1551-2916.2007.01785.x ↗
66. Effect of atmosphere on interconnect-seal glass interaction for solid oxide fuel/electrolyzer cells10.1111/j.1551-2916.2010.04020.x ↗
67. Effect of interconnect coating procedure on solid oxide fuel cell performance10.1016/j.matlet.2019.126898 ↗
68. Synergistic role of carbon nanotube and SiCn reinforcements on mechanical properties and corrosion behavior of Cu-based nanocomposite developed by flake powder metallurgy and spark plasma sintering process10.1016/j.msea.2020.139395 ↗
69. Glass sealants and their interaction study with interconnect materials10.1080/0371750X.2013.772727 ↗
70. Corrosion study of SiO 2 –CaO–Al 2 O 3 –Na 2 O–TiO 2 glass coating on steel10.1179/1743294413Y.0000000138 ↗
71. Recent advances in metallic interconnects for solid oxide fuel cells10.1179/174328007X212526 ↗
72. Behaviour of various glass–ceramic sealants with ferritic steels under simulated SOFC stack conditions10.1016/j.jpowsour.2005.02.015 ↗
73. Tuning the interfacial reaction between CaO–SrO–Al2O3–B2O3–SiO2 sealing glass–ceramics and Cr-containing interconnect: crystalline structure vs. glass structure10.1016/j.jeurceramsoc.2014.01.023 ↗
74. Compliant alkali silicate sealing glass for solid oxide fuel cell applications: thermal cycle stability and chemical compatibility10.1016/j.jpowsour.2010.11.020 ↗
75. Oxidation resistance and electrical properties of anodically electrodeposited Mn–Co oxide coatings for solid oxide fuel cell interconnect applications10.1016/j.jpowsour.2008.09.114 ↗
76. Elastic properties of multi-layered ceramic systems for SOCs10.1111/ijac.12801 ↗