Preparation of directionally solidified Al2O3/YAG/ZrO2 ternary eutectic ceramic with induction heating zone melting
Source abstract
Abstract
Abstract Al2O3/YAG/ZrO2 directionally solidified eutectic ceramics (DSECs) were prepared via induction heating zone melting (IHZM), in which sintered ceramic rods were used as the preform. The DSECs consisted of Al2O3, Y3Al5O12 (YAG), and ZrO2 phases, similar to the sintered preforms. The microstructure of the DSECs was similar to a “sponge-net” structure, wherein the three phases exhibited coupled growth; the YAG phase made up the matrix, and the Al2O3 and ZrO2 phases formed the framework of the sponge-net. The eutectic inter-phase spacing (λ) gradually decreased with an increase in the growth rate (v), and this was in accordance with a constant λ2v of about 100. The difference in the microstructures of the DSECs prepared via IHZM and a natural-cooling solidified eutectic ceramic (NCSEC) was attributed to the different nucleation and growth modes. The hardness and fracture toughness of the DSECs were 16.1 GPa and 2.98 MPa m1/2, respectively, which were 1.82 and 1.27 times those of a sintered ceramic. The ZrO2 phase exhibited a toughening effect in a variety of ways such as crack bridging, crack deflection, crack branching, and crack pinning. The hardness and fracture toughness showed complex variations due to the size effect of the ZrO2 phase and defect reduction. The ZrO2 phase distribution effect improved the fracture toughness of the NCSEC and the DSECs prepared at high growth rates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Directionally solidified eutectic ceramic oxides10.1016/j.pmatsci.2005.10.002 ↗
2. Fu · 2008 · 282
3. Temperature dependence of flexural strength and microstructure of Al2O3/Y3Al5O12/ZrO2 ternary melt growth composites10.1023/A:1016073115264 ↗
4. Colony structure in Ce-doped Al2O3/YAG eutectic systems grown by vertical Bridgman technique10.1016/j.jcrysgro.2016.05.003 ↗
5. The growth of Al2O3/YAG: Ce melt growth composite by the vertical Bridgman technique using an a-axis Al2O3 seed10.1016/j.jcrysgro.2015.06.023 ↗
6. Microstructure of Y2O3 doped Al2 O3/ZrO2 eutectic fibers grown by the micro-pulling-down method10.1016/S0022-0248(01)01451-8 ↗
7. Microstructure and crystallography of Al2O3-Y3Al5O12-ZrO2, ternary eutectic oxide grown by the micro pulling down technique10.1016/j.jcrysgro.2015.07.020 ↗
8. Rapid solidification behaviour of Al2O3/Y3Al5O12 (YAG) binary eutectic ceramic in situ composites10.1016/j.msea.2007.06.080 ↗
9. Preparation and characterization of Al2O3/Y3Al5O12/ZrO2 ternary hypoeutectic in situ composites by laser rapid solidification10.1063/1.2955768 ↗
10. Longitudinal cross-section microstructure of growth striation in Al2O3/Y3Al5O12/ZrO2 directionally solidified eutectic ceramic prepared by laser floating zone10.1016/j.jeurceramsoc.2012.12.003 ↗
11. Microstructure and mechanical properties of Al2O3/Y3Al5O12/ZrO2 hypereutectic directionally solidified ceramic prepared by laser floating zone10.1016/j.jeurceramsoc.2014.04.033 ↗
12. Fabrication of Al2O3/YAG eutectic ceramics utilizing a fast combustion reaction heating method10.1360/N972014-00450 ↗
13. A12O3-ZrO2 (Y2O3) eutectic ceramics preparing by self-pressing assisting combustion synthesis under high gravity
14. Fabrication of an Al2O3/YAG/ZrO2 ternary eutectic by combustion synthesis melt casting under ultra-high gravity10.1111/j.1551-2916.2008.02911.x ↗
15. Microstructure and mechanical properties of Al2O3/ZrO2 eutectic ceramic composites prepared by explosion synthesis10.1016/j.jallcom.2012.11.064 ↗
16. Microstructure and mechanical properties of quasi-eutectic Al2O3–Y3Al5O12–ZrO2 ternary composites rapidly solidified from melt10.1016/j.msea.2003.10.078 ↗
17. Effect of cooling rate on the microstructure and mechanical properties of melt-grown Al2O3/YAG/ZrO2 eutectic ceramic10.1016/j.jeurceramsoc.2012.06.020 ↗
18. Microstructure refinement approaches of melt-grown Al2O3/YAG/ZrO2 eutectic bulk10.1016/j.ceramint.2013.02.089 ↗
19. Lakiza · J. Am. Ceram. Soc. · 1997 · 80 · 89310.1111/j.1151-2916.1997.tb02919.x ↗
20. Microstructure of the directionally solidified ternary eutectic ceramic Al2O3/MgAl2O4/ZrO210.1016/j.ceramint.2016.02.007 ↗
21. Fu · 2013 · 38
22. Processing, microstructure and mechanical properties of directionally-solidified Al2O3/Y3Al5O12/ZrO2 ternary eutectics10.1016/j.jeurceramsoc.2005.11.005 ↗
23. Lamellar and rod eutectic growth
24. Effect of the melt temperature on the solidification process of liquid garnets Ln3Al5O12 (Ln = Dy, Y, and Lu)10.1111/j.1151-2916.1992.tb04408.x ↗
25. Hu · 2000 · 170
26. Revised form of Jackson–Hunt theory: application to directional solidification of MnBi/Bi eutectics10.1016/S0022-0248(99)00532-1 ↗
27. Preparation and microstructure evolution of directionally solidified Al2O3/YAG/YSZ ternary eutectic ceramics by a modified electron beam floating zone melting10.1016/j.matlet.2012.09.064 ↗
28. Eutectic growth: a modification of the Jackson and Hunt theory10.1016/0956-7151(91)90114-G ↗
29. Competitive growth of stable and metastable Fe- C- X eutectics: Part I. experiments10.1007/BF02645199 ↗
30. Investigation on solid-liquid interface morphology during the A12O3/MgA12O4 eutectic ceramics solidification
31. Preparation and characterization of Al2O3/Y3Al5O12/ZrO2 ternary hypoeutectic in situ composites by laser rapid solidification10.1063/1.2955768 ↗
32. Microstructure of Al2O3/Y3Al5O12 eutectic fibers grown by μ-PD method10.1016/S0022-0248(98)01052-5 ↗