journal article·2018-05

Multiply depolarized composite cathode of Li1.2Mn0.54Ni0.13Co0.13O2 embedded in a combinatory conductive network for lithium-ion battery with superior overall performances

Xichao Li, Lili Zheng, Zhao Zang, Tao Liu, Fengting Cao, Xiaolin Sun, Shimei Sun, Quanhai Niu, Yuxiang Lu, Takeo Ohsaka, Jianfei Wu

Publisher page

Abstract

Abstract The multiply depolarized composite cathode consisted of Li1.2Mn0.54Ni0.13Co0.13O2 (LMNCO) and a combinatory conductive network of graphene (GN) + carbon nanotubes (CNTs) in the active material and GN coating at the interface of current collector is synthesized via pasting LMNCO/GN/CNTs composite slurry on GN coated Al foil. The interlaced GN + CNTs conductive network improves both the electronic conductivity and Li ion transport and stabilizes the structure of composite. The GN coating at the interface of current/active materials interlaces with GN + CNTs in the active materials and improves the adhesion and reduces the resistance between the active material and current collector. Consequently, the LMNCO composite cathode exhibits superior rate capacities of 132 mAh g−1 at 5C and 97 mAh g−1 at 10C, high cycling capacity retentions of 86% at 1C and 85% at 2C after 100 cycles, respectively and lower voltage fading. This combinatory conductive network is much more efficient for reducing the resistance and polarization of electrode than any single conductive network of GN + CNTs, CNTs, GN or GN coating.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Development and challenges of LiFePO4 cathode material for lithium-ion batteries10.1039/C0EE00029A ↗
2. Recent achievements on inorganic electrode materials for lithium-ion batteries10.1021/ja507828x ↗
3. Recent developments in cathode materials for lithium ion batteries10.1016/j.jpowsour.2009.08.089 ↗
4. Recent progress in high-voltage lithium ion batteries10.1016/j.jpowsour.2013.03.024 ↗
5. Recent progress in cathode materials research for advanced lithium ion batteries10.1016/j.mser.2012.05.003 ↗
6. Review—Li-Rich layered oxide cathodes for next-generation Li-Ion batteries: chances and challenges10.1149/2.0111514jes ↗
7. Lithium- and manganese-rich oxide cathode materials for high-energy lithium ion batteries10.1002/aenm.201600906 ↗
8. Li2MnO3-stabilized LiMO2 (M = Mn, Ni, Co) electrodes for lithium-ion batteries10.1039/b702425h ↗
9. Recent progress in Li-rich layered oxides as cathode materials for Li-ion batteries10.1039/C4RA12454E ↗
10. Li2MnO3 based Li-rich cathode materials: towards a better tomorrow of high energy lithium ion batteries10.1179/1753555714Y.0000000166 ↗
11. The preparation and electrochemical performance of solid solutions LiCoO2–Li2MnO3 as cathode materials for lithium ion batteries10.1016/j.jpowsour.2005.12.037 ↗
12. Role of the composition of lithium-rich layered oxide materials on the voltage decay10.1016/j.jpowsour.2015.01.146 ↗
13. Structural variation of Li2MnO3 during charge-discharge cycling10.2109/jcersj2.123.589 ↗
14. Mechanism of electrochemical activity in Li2MnO3
15. Study of the electrochemical behavior of the “inactive” Li2MnO310.1016/j.electacta.2012.05.144 ↗
16. Electrochemical kinetics of the 0.5Li2MnO3·0.5LiMn0.42Ni0.42Co0.16O2 ‘composite’ layered cathode material for lithium-ion batteries10.1039/c2ra20772a ↗
17. Effect of Cr doping on the structural, electrochemical properties of Li[Li0.2Ni0.2−x/2Mn0.6−x/2Crx]O2 (x=0, 0.02, 0.04, 0.06, 0.08) as cathode materials for lithium secondary batteries10.1016/j.jpowsour.2007.01.070 ↗
18. Effects of Sn doping on the structural and electrochemical properties of Li1.2Ni0.2Mn0.8O2 Li-rich cathode materials10.1016/j.electacta.2015.05.068 ↗
19. Magnesium-Doped Li1.2[Co0.13Ni0.13Mn0.54]O2 for lithium-ion battery cathode with enhanced cycling stability and rate capability10.1021/acsami.5b03125 ↗
20. Excellent rate capability of Mg doped Li[Li0.2Ni0.13Co0.13Mn0.54]O2 cathode material for lithium-ion battery10.1016/j.electacta.2014.05.043 ↗
21. Synthesis, characterisation and electrochemical intercalation kinetics of nanostructured aluminium-doped Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathode material for lithium ion battery10.1016/j.electacta.2012.08.074 ↗
22. Excellent rate performance and high capacity of Mo doped layered cathode material Li[Li0.2Mn0.54Ni0.13Co0.13]O2 derived from an improved coprecipitation approach10.1016/j.electacta.2016.04.180 ↗
23. Molybdenum-doped lithium-rich layered-structured cathode material Li1.2Ni0.2Mn0.6O2 with high specific capacity and improved rate performance10.1016/j.electacta.2015.03.223 ↗
24. Improving cycling performance of Li-rich layered cathode materials through combination of Al2O3-based surface modification and stepwise precycling10.1016/j.jpowsour.2015.11.014 ↗
25. Confined ZrO2 encapsulation over high capacity integrated 0.5Li[Ni0.5Mn1.5]O4·0.5[Li2MnO3·Li(Mn0.5Ni0.5)O2] cathode with enhanced electrochemical performance10.1016/j.electacta.2016.02.129 ↗
26. Synthesis and performances of Li-Rich@AlF3 @Graphene as cathode of lithium ion battery10.1016/j.electacta.2016.02.043 ↗
27. Graphene-modified LiFePO4 cathode for lithium ion battery beyond theoretical capacity10.1038/ncomms2705 ↗
28. Spinel LiMn2O4/reduced graphene oxide hybrid for high rate lithium ion batteries10.1039/c1jm13741g ↗
29. Improved kinetics of LiNi1/3Mn1/3Co1/3O2 cathode material through reduced graphene oxide networks10.1039/c2cp23363k ↗
30. Low temperature performance of graphite and LiNi0.6Co0.2Mn0.2O2 electrodes in Li-ion batteries10.1007/s10853-014-8479-6 ↗
31. Improvement of electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathode material by graphene nanosheets modification10.1016/j.electacta.2014.10.093 ↗
32. Depolarized and fully active cathode based on Li(Ni0.5Co0.2Mn0.3)O2 embedded in carbon nanotube network for advanced batteries10.1021/nl5018139 ↗
33. Fabrication of cathode materials based on LiMn2O4/CNT and LiNi0.5Mn1.5O4/CNT nanocomposites for lithium – ion batteries application10.1590/1516-1439.016415 ↗
34. A three-dimensional LiFePO4/carbon nanotubes/graphene composite as a cathode material for lithium-ion batteries with superior high-rate performance10.1016/j.jallcom.2014.09.169 ↗
35. Novel method of current collector coating by multiwalled carbon nanotube Langmuir layer for enhanced power performance of LiMn2O4 electrode of Li-ion batteries10.1016/j.electacta.2016.11.058 ↗
36. Improve the overall performances of lithium ion batteries by a facile method of modifying the surface of Cu current collector with carbon10.1016/j.electacta.2015.06.107 ↗
37. High-temperature carbon-coated aluminum current collector for enhanced power performance of LiFePO4 electrode of Li-ion batteries10.1016/j.elecom.2010.01.028 ↗
38. Effect of graphene modified Cu current collector on the performance of Li4Ti5O12 anode for lithium-ion batteries10.1021/acsami.6b10038 ↗
39. Anomalous capacity and cycling stability of xLi2MnO3·(1−x)LiMO2 electrodes (M=Mn, Ni, Co) in lithium batteries at 50°C10.1016/j.elecom.2006.11.006 ↗
40. Synthesis and characterization of xLi2MnO3·(1 − x)LiMn1/3Ni1/3Co1/3O2 composite cathode materials for rechargeable lithium-ion batteries10.1016/j.jpowsour.2013.04.155 ↗
41. Cation ordering in the layered Li1+x(Ni0.425Mn0.425Co0.15)1−xO2 materials (x=0 and 0.12)10.1016/j.jpowsour.2007.05.090 ↗
42. Effects of preparation methods of LiNi0.8Co0.2O2 cathode materials on their morphology and electrochemical performance10.1016/j.jpowsour.2004.05.022 ↗
43. Synthesis and cathodic properties of LiCo1-yRhyO2 (0≤y≤0.2) and LiRhO210.1149/1.1410968 ↗
44. Electrochemical properties of 0.6Li[Li1/3Mn2/3]O2–0.4LiNixMnyCo1−x−yO2 cathode materials for lithium-ion batteries10.1016/j.jpowsour.2012.06.067 ↗
45. First evidence of manganese–nickel segregation and densification upon cycling in Li-Rich layered oxides for lithium batteries10.1021/nl4019275 ↗
46. Could graphene construct an effective conducting network in a high-power lithium ion battery?10.1016/j.nanoen.2012.02.004 ↗
47. Preparation and electrochemical properties of LiFePO4/graphene composites from tailoring graphene oxides10.1007/s11581-016-1641-1 ↗
48. Effects of graphene with different sizes as conductive additives on the electrochemical performance of a LiFePO4 cathode10.1039/C7RA02155K ↗
49. Advanced Li-Rich cathode collaborated with graphite/silicon anode for high performance Li-Ion batteries in half and full cells10.1016/j.electacta.2015.09.067 ↗
50. Carbon nanotube and graphene nanosheet co-modified LiFePO4 nanoplate composite cathode material by a facile polyol process10.1016/j.apsusc.2013.07.059 ↗
51. Nanoscale surface modification of lithium-rich layered-oxide composite cathodes for suppressing voltage fade10.1002/anie.201506408 ↗
52. Bifunctional effects of carbon coating on high-capacity Li1.2Ni0.13Co0.13Mn0.54O2 cathode for lithium-ion batteries10.1007/s10008-014-2707-5 ↗
53. Template GNL-assisted synthesis of porous Li1.2Mn0.534Ni0.133Co0.133O2: towards high performance cathodes for lithium ion batteries10.1039/C5RA00845J ↗