Comparison of anti-corrosive properties between hot alkaline nitrate blackening and hydrothermal blackening routes
Source abstract
Abstract
Abstract In this study, the oxide films were formed on carbon steel by using hot alkaline nitrate and hydrothermal treatments. A dense and protective oxide film was obtained by hydrothermal method due to application of high pressure and by increasing solution temperature from boiling temperature (155 °C) to 250 °C. Oxide films were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), and electrochemical tests including potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). These analyses showed that the magnetite film which was formed on carbon steel surface by hydrothermal treatment offers the best resistance in 3.5 wt.% NaCl solution. Although thicker oxide film could be obtained via hot alkaline nitrate black oxidizing, corrosion resistance was lower as a result of being highly porous and the presence of hematite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · ZnO doping and properties · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Weber · 1976
2. Schwartz · 2002
3. ISO 11408 · 1999
4. Farrel · Met. Finish · 2002 · 1 · 45610.1016/S0026-0576(02)82049-9 ↗
5. Characteristics of blueing as an alternative chemical conversion treatment on carbon steel10.1016/j.surfcoat.2006.10.006 ↗
6. Oxide growth and conversion on carbon steel as a function of temperature over 25 and 80 under ambient pressure10.1016/j.electacta.2011.05.047 ↗
7. Facile synthesis of ultrathin magnetic iron oxide nanoplates by Schikorr reaction10.1186/1556-276X-8-16 ↗
8. The effect of temperature on carbon steel corrosion under geological conditions10.1016/j.apgeochem.2014.11.008 ↗
9. Magnetite thin film on mild steel formed by hydrothermal electrolysis10.1016/j.cej.2014.11.146 ↗
10. Anodizing steel in KOH and NaOH solutions10.1149/1.2767417 ↗
11. Properties of the nanoporous anodic oxide electrochemically grown on steel in hot 50% NaOH
12. 2003
13. On the formation of magnetite coatings on low-carbon steel in ammonium nitrate solution10.1134/S0033173208070138 ↗
14. Features of formation of magnetite coatings on low–carbon steel in hot nitrate solutions10.1134/S1023193510100113 ↗
15. Hydrothermal growth and characterization of magnetite (Fe3O4) thin films10.1016/j.surfcoat.2006.10.037 ↗
16. A new hydrothermal blackening technology for Fe3O4 coatings of carbon steel10.1016/j.apsusc.2008.03.184 ↗
17. Hydrothermal technology for nanotechnology10.1016/j.pcrysgrow.2007.04.001 ↗
18. Byrappa · 2013
19. Progress in electrochemical synthesis of magnetic iron oxide nanoparticles10.1016/j.jmmm.2014.05.015 ↗
20. Hydrothermal preparation of octadecahedron Fe3O4 thin film for use in an electrochemical supercapacitor10.1016/j.electacta.2009.04.017 ↗
21. A new hydrothermal blackening technology for Fe3O4 coatings of carbon steel10.1016/j.apsusc.2008.03.184 ↗
22. Influence of grain refinement on the electrochemical behavior of AISI 430 ferritic stainless steel in an alkaline solution10.1016/j.apsusc.2015.11.085 ↗
23. A Method for Improving the robustness of linear kramers-kronig validity tests10.1016/j.electacta.2014.01.034 ↗
24. Practical application of the Kramers-Kronig transformation on impedance measurements in solid state electrochemistry10.1016/0167-2738(93)90261-Z ↗
25. Electrochemical study on the corrosion behaviour of a new low-nickel stainless steel in carbonated alkaline solution in the presence of chlorides10.1016/j.electacta.2014.02.107 ↗
26. Analysis of electrodes displaying frequency dispersion in mott-schottky tests10.1149/1.2929819 ↗
27. Surface treatment of iron by electrochemical oxidation and subsequent annealing for the improvement of anti-corrosive properties10.1016/j.cap.2014.02.014 ↗