journal article·2024-04

High-strength FeSiCr soft magnetic composite fabricated via liquid-phase sintering for high-frequency applications

Jiayi Sun, Xiuyuan Fan, Zhenhua Zhang, Jiabin Fan, Junting Sun, Lianze Ji, Guohua Bai, Xuefeng Zhang

Publisher page

Abstract

Soft magnetic composites (SMCs) are essential materials for electronic devices due to their high saturation magnetization. However, traditional SMCs fabricated by cold-pressing method possess low strength and insufficiently reliable insulation, which restricts their further application. In this study, liquid-phase sintering technique is introduced and optimized to fabricate FeSiCr/MoO 3 SMCs. During sintering, ammonium molybdate (AMT) decomposes to form liquid-phase MoO 3 , which helps to achieve insulation and promote the formation of a transition layer on the surface of FeSiCr. The most optimum sample (the 400 MPa/800 °C /6 wt% sample) is obtained with crushing strength of 329.8 MPa, real part permeability of 29.7 (1 MHz), cut-off frequency of 116 MHz, high saturation magnetization of 177.3 emu/g and power loss of 1224.4 kW/m 3 (10 MHz, 5 mT). This study indicates that liquid-phase sintering may be a reliable means for developing novel SMCs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic Properties of Alloys · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Soft magnetic materials for a sustainable and electrified world10.1126/science.aao0195 ↗
2. A mechanically strong and ductile soft magnet with extremely low coercivity10.1038/s41586-022-04935-3 ↗
3. Magnetic materials and devices for the 21st century: stronger, lighter, and more energy efficient10.1002/adma.201002180 ↗
4. Past, present, and future of soft magnetic composites10.1063/1.5027045 ↗
5. Applications of exchange coupled bi-magnetic hard/soft and soft/hard magnetic core/shell nanoparticles10.1016/j.physrep.2014.09.007 ↗
6. A review on MnZn ferrites: synthesis, characterization and applications10.1016/j.ceramint.2020.03.287 ↗
7. A review on preparation techniques for synthesis of nanocrystalline soft magnetic ferrites and investigation on the effects of microstructure features on magnetic properties10.1007/s00339-016-0217-2 ↗
8. Development of Mn-Zn power ferrite with low losses over a broad temperature range for applications in the high frequency region of 0.5-3 MHz10.1016/j.ceramint.2021.04.152 ↗
9. Synthesis of nanocrystalline Mn-Zn ferrite powders through thermolysis of mixed oxalates10.1016/j.ceramint.2010.11.019 ↗
10. Synergistic effect of V2O5 and Bi2O3 on the grain boundary structure of high-frequency NiCuZn ferrite ceramics10.1007/s40145-022-0585-3 ↗
11. High-frequency MnZn soft magnetic ferrite by engineering grain boundaries with multiple-ion doping10.1016/j.jmst.2020.12.009 ↗
12. Regulation of magnetic and electrical performances in core-shell-structured FeSiCr@BaTiO3 soft magnetic composites10.1016/j.jallcom.2021.162724 ↗
13. High permeability and low loss bioinspired soft magnetic composites with nacre-like structure for high frequency applications10.1016/j.actamat.2019.01.035 ↗
14. High-performance FeSiAl soft magnetic composites achieved by confined solid-state reaction10.1016/j.actamat.2023.119102 ↗
15. High permeability and low core loss Fe-based soft magnetic composites with Co-Ba composite ferrite insulation layer obtained by sol-gel method10.1016/j.jallcom.2021.162107 ↗
16. Soft magnetic composites FeSiAl/MoS2 with high magnetic permeability and low magnetic loss10.1016/j.jallcom.2022.166893 ↗
17. Comparative study on the high frequency performances of the easy-plane FeNi@SiO2 powder soft magnetic composite10.1016/j.cap.2022.06.016 ↗
18. Nacre-inspired, efficient, and multifunctional soft magnetic composites by cold sintering design10.1002/adem.202101377 ↗
19. Microstructure and magnetic properties of FeSiCr soft magnetic powder cores with a MgO insulating layer prepared by the sol-gel method10.1016/j.ceramint.2022.04.227 ↗
20. Optimization of sol-gel prepared SiO2 coating and FeSiCr@SiO2 soft magnetic composites based on critical ammonia concentration10.1016/j.matchemphys.2023.127765 ↗
21. Correlating the microstructure, growth mechanism and magnetic properties of FeSiAl soft magnetic composites fabricated via HNO3 oxidation10.1016/j.actamat.2018.01.001 ↗
22. Interfacial reaction enhanced liquid-phase sintering of metal/oxide soft magnetic composite10.1002/adfm.202303951 ↗
23. Dielectric and microwave absorption properties of FeSiAl/Al2O3 composites containing FeSiAl particles of different sizes10.1016/j.ceramint.2020.11.129 ↗
24. FeSiCr@NiZn SMCs with ultra-low core losses, high resistivity for high frequency applications10.1016/j.jallcom.2020.154736 ↗
25. High-performance core-shell-type FeSiCr@MnZn soft magnetic composites for high-frequency applications10.1016/j.jallcom.2020.158215 ↗
26. FeSiCr soft magnetic composites with significant improvement of high-frequency magnetic properties by compositing nano-YIG ferrite insulating layer10.1016/j.ceramint.2023.05.277 ↗
27. High performance of FeSiAl/hBN soft magnetic composites10.1016/j.jallcom.2021.163191 ↗
28. Industrial-scale fabrication of FeSiCr magnetic powder cores with high magnetic permeability and low loss10.1016/j.jallcom.2023.171095 ↗
29. Frequency dispersion of complex permeability in Mn-Zn and Ni-Zn spinel ferrites and their composite materials10.1063/1.1542651 ↗
30. Synthesis, microstructure and magnetic properties of Ni-Zn ferrites10.1016/S0304-8853(02)00449-3 ↗
31. High-frequency dielectric behaviour of erbium substituted Ni-Zn ferrites10.1016/S0304-8853(02)01544-5 ↗
32. Mechanisms of phase formation along the synthesis of Mn-Zn ferrites by the polymeric precursor method10.1016/j.ceramint.2014.07.137 ↗
33. Low temperature sintered MnZn ferrites for power applications at the frequency of 1 MHz10.1016/j.jeurceramsoc.2021.05.013 ↗
34. Effect of zinc concentration on the microstructure and relaxation frequency of Mn-Zn ferrites synthesized by solid state reaction10.1016/j.ceramint.2013.03.046 ↗
35. Cold sintering process of ZnO ceramics: effect of the nanoparticle/microparticle ratio10.1016/j.jeurceramsoc.2020.05.059 ↗
36. Microwave-sintering preparation and densification behavior of sodium zirconium phosphate ceramics with ZnO additive10.1016/j.ceramint.2019.10.001 ↗
37. Preparation and properties of Cu/RGO composites via H-2 reduction and spark plasma sintering10.1016/j.jallcom.2022.164654 ↗
38. Microwave absorbing performance enhancement of Fe75Si15Al10composites by selective surface oxidation10.1063/1.4998453 ↗
39. Minor yttrium nitrate addition effect on FeSiCr alloy powder core electromagnetic properties10.1016/j.jmmm.2017.07.099 ↗
40. Core-loss reduction of Fe-Si-Cr crystalline alloy according to particle size in the high frequency band10.1016/j.cap.2022.05.021 ↗
41. The magnetic properties of FeSiCr/Epoxy resin soft magnetic composites for injection molding in a broad frequency up to 2000 kHz10.1007/s11664-022-10071-5 ↗
42. Improved magnetic properties of FeSiCr soft magnetic composites by adding strontium ferrite10.1007/s11664-022-09970-4 ↗
43. Microstructure and properties of FeSiCr/PA6 composites by injection molding using FeSiCr powders by phosphating and coupling treatment10.1016/j.jmmm.2017.12.067 ↗
44. The magnetic properties and microstructure of phosphated amorphous FeSiCr/silane soft magnetic composite10.1016/j.jmmm.2018.11.058 ↗
45. Improved magnetic properties of FeSiCr amorphous soft magnetic composites by adding carbonyl iron powder10.1016/j.jnoncrysol.2021.120673 ↗