Achieving strength-ductility synergy in a novel Al-Mg-Zn-Cu-Si lightweight multi-component alloy via eutectic structure refinement
Source abstract
Abstract
The development of lightweight multi-component alloys (MCAs) with good strength plasticity synergy faces a significant challenge, owing to the enormous number of potential component combinations, serious microstructure defects caused by poor castability, and the inefficiency of conventional empirical trial-and-error approaches. To surmount this challenge, we proposed an alloy design method, using the CALPHAD-based high-throughput calculation (HTC) to quickly identify compositions in Al( 100−w-x-y-z)Mg wZn xCu ySi z MCAs over high-dimensional composition space that can make α-Al and Mg 2 Si nucleate at the same time. Then successfully low-cost prepared large-sized MCA ingots with less segregation and porosity, and good performance according to the HTC screening results, and the calculated nucleation temperatures were in high agreement with the experimental values, with an error ranging within 0.5%. The granular eutectic Mg 2Si phase exhibited exceptional uniformity and dispersion within the microstructure of the Al 77Mg 8Zn 5Cu 6Si 4 alloy, with an average size of 1.8 µm. Consequently, the as-cast Al 77Mg 8Zn 5Cu 6Si 4 alloy displayed superior strength plasticity synergy at room temperature (RT), with the ultimate compressive strength reaching 706 MPa and the strain reaching 14.2%. This work demonstrates that the CALPHAD-based HTC approach provides an effective strategy for accelerating the design of lightweight MCAs with large-size and excellent mechanical properties.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
3. Simultaneously enhanced strength and strain hardening capacity in FeMnCoCr high-entropy alloy via harmonic structure design10.1016/j.scriptamat.2020.09.036 ↗
4. Ultrahigh high-strain-rate superplasticity in a nanostructured high-entropy alloy10.1038/s41467-020-16601-1 ↗
5. Breakthrough the strength-ductility trade-off in a high-entropy alloy at room temperature via cold rolling and annealing10.1016/j.msea.2020.140264 ↗
6. Mechanical behaviors and precipitation transformation of the lightweight high-Zn-content Al-Zn-Li-Mg-Cu alloy10.1016/j.msea.2020.140637 ↗
7. Shear band-driven precipitate dispersion for ultrastrong ductile medium-entropy alloys
8. A novel low-density semi-hard magnetic Al20Fe20Mg20Ni20Ti20 high entropy alloy10.1016/j.jmmm.2020.167342 ↗
9. Sub-grain formation in Al-Li-Mg-Zn-Cu lightweight entropic alloy by ultrasonic hammering10.1016/j.intermet.2020.106780 ↗
10. Microstructure and mechanical properties of ultrafine quaternary Al-Cu-Si-Mg eutectic alloy
11. Deformation-driven modification towards strength-ductility enhancement in Al-Li-Mg-Zn-Cu lightweight high-entropy alloys10.1016/j.msea.2021.142332 ↗
12. Microstructure and mechanical properties of MgMnAlZnCu high entropy alloy cooling in three conditions10.4028/www.scientific.net/MSF.686.235 ↗
13. Phase prediction, microstructure and high hardness of novel light-weight high entropy alloys10.1016/j.jmrt.2018.06.010 ↗
14. Design, microstructure and mechanical properties of cast medium entropy aluminium alloys
15. A light-weight high-entropy alloy Al20Be20Fe10Si15Ti3510.1007/s11431-017-9073-0 ↗
16. Designing the composition and processing route of aluminum alloys using CALPHAD: case studies10.1016/j.calphad.2018.12.010 ↗
17. Effects of ultrasonic melt treatment and solution treatment on the microstructure and mechanical properties of low-density multicomponent Al70Mg10Si10Cu5Zn5 alloy10.1016/j.jallcom.2016.11.305 ↗
18. Promising properties and future trend of eutectic high entropy alloys10.1016/j.scriptamat.2020.06.022 ↗
19. Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range10.1016/j.actamat.2016.11.016 ↗
20. Tensile deformation behavior and mechanical properties of a bulk cast Al0.9CoFeNi2 eutectic high-entropy alloy10.1016/j.jmst.2020.05.053 ↗
21. A novel bulk eutectic high-entropy alloy with outstanding as-cast specific yield strengths at elevated temperatures10.1016/j.scriptamat.2021.114132 ↗
22. Gas tungsten arc welding of as-cast AlCoCrFeNi2.1 eutectic high entropy alloy10.1016/j.matdes.2022.111176 ↗
23. Microstructure and mechanical behavior of the directionally solidified AlCoCrFeNi2.1 eutectic high-entropy alloy10.1016/j.jmrt.2022.07.065 ↗
24. Rapid alloy design from superior eutectic high-entropy alloys10.1016/j.scriptamat.2022.114875 ↗
25. Microstructures and mechanical properties of Co2MoxNi2VWx eutectic high entropy alloys10.1016/j.matdes.2016.07.113 ↗
26. Uncovering the eutectics design by machine learning in the Al-Co-Cr-Fe-Ni high entropy system10.1016/j.actamat.2019.10.043 ↗
27. Design of NiCoCrAl eutectic high entropy alloys by combining machine learning with CALPHAD method
28. Discovery of aluminum alloys with ultra-strength and high-toughness via a property-oriented design strategy10.1016/j.jmst.2021.05.011 ↗
29. A cost-effective eutectic high entropy alloy with an excellent strength-ductility combination designed by VEC criterion10.1016/j.jmrt.2022.05.165 ↗
30. A new strategy to design eutectic high-entropy alloys using mixing enthalpy10.1016/j.intermet.2017.09.001 ↗
31. A new pseudo binary strategy to design eutectic high entropy alloys using mixing enthalpy and valence electron concentration10.1016/j.matdes.2018.01.057 ↗
32. A new strategy to design eutectic high-entropy alloys using simple mixture method10.1016/j.matdes.2018.01.025 ↗
33. CALPHAD aided eutectic high-entropy alloy design10.1016/j.matlet.2019.127175 ↗
34. New eutectic high-entropy alloys based on Co-Cr-Fe-Mo-Ni-Al: design, characterization and mechanical properties10.1007/s12540-019-00515-9 ↗
35. Designing eutectic high entropy alloys of CoCrFeNiNbx10.1016/j.jallcom.2015.09.153 ↗
36. Design of ternary high-entropy aluminum alloys (HEAls)10.1016/j.jallcom.2021.161836 ↗
37. Accelerating optimization of IN718 by mapping alloying effects on phase stabilities and mechanical properties using high-throughput calculations10.1016/j.matdes.2022.110603 ↗
38. High-throughput design of high-performance lightweight high-entropy alloys10.1038/s41467-021-24523-9 ↗
39. Effects of electromagnetic frequency on the microstructure and mechanical properties of Al70Zn10Mg10Cu5Si5 medium entropy alloy10.1016/j.jmrt.2022.02.034 ↗
40. Effects of electromagnetic stirring and subsequent homogenization treatment on the microstructure and mechanical properties of Al70Zn10Mg10Cu5Si5 multi-component alloy10.1016/j.jallcom.2023.170725 ↗
41. Mechanical properties and corrosion behavior of novel Al-Mg-Zn-Cu-Si lightweight high entropy alloys10.1016/j.jallcom.2021.163508 ↗
42. Synergy of multiple precipitate/matrix interface structures for a heat resistant high-strength Al alloy
43. Compositional evolution of Q-phase precipitates in an aluminum alloy10.1016/j.actamat.2014.05.001 ↗
44. Improvement of microstructure and mechanical properties of near‐eutectic Al-Mg2Si alloys by Eu addition10.1002/adem.202001447 ↗
45. Development of lightweight Al-based entropy alloys for elevated temperature applications10.1016/j.jallcom.2022.168619 ↗
46. Theoretical and experimental study of precipitation and coarsening kinetics of θ′ phase in Al-Cu alloy10.1016/j.vacuum.2021.110263 ↗
47. Enhanced high-temperature mechanical properties of laser-arc hybrid additive manufacturing of Al-Zn-Mg-Cu alloy via microstructure control10.1016/j.jmst.2023.05.071 ↗
48. The orientation relationships and interfaces of θ-Al2Cu/Cu and γ2-Al4Cu9/Cu and the formation sequence of θ-Al2Cu and γ2-Al4Cu9 at the Cu/Al interface10.1016/j.tsf.2020.138436 ↗
49. Evolution of precipitate and precipitate/matrix interface in Al-Zn-Mg-Cu (-Ag) alloys10.1016/j.jmst.2022.07.049 ↗
50. Unraveling precipitation evolution and strengthening function of the Al-Zn-Mg-Cu alloys with various Zn contents: Multiple experiments and integrated internal-state-variable modeling10.1016/j.jmst.2021.12.008 ↗
51. Effect of heat treatment on microstructure, hardness and corrosion resistance of 7075 Al alloys fabricated by SLM10.1016/j.jmapro.2020.10.071 ↗
52. Effect of energy density on formability, microstructure and micro-hardness of selective laser melted Sc- and Zr- modified 7075 aluminum alloy10.1016/j.powtec.2019.08.082 ↗
53. Microstructure and microhardness of hot extruded 7075 aluminum alloy micro-gear10.1016/j.jmatprotec.2014.12.022 ↗
54. Effect of pre-deformation on quench-induced inhomogeneity of microstructure and hardness in 7050 aluminum alloy10.1016/j.matchar.2019.110005 ↗
55. Grain boundary traction signatures: quantifying the asymmetrical dislocation emission processes under tension and compression10.1016/j.jmps.2017.03.009 ↗
56. Compositional complexity dependence of dislocation density and mechanical properties in high entropy alloy systems10.1016/j.pnsc.2020.07.002 ↗
57. Transitions in the morphology and critical stresses of gliding dislocations in multiprincipal element alloys
58. Role of V in microstructure and strength enhancement of 4 vol% nano-TiB2/TiAl composites10.1016/j.msea.2022.144342 ↗
59. XCII. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals10.1080/14786440808520496 ↗
60. Study to microstructure and mechanical properties of Mg containing high entropy alloys10.4028/www.scientific.net/MSF.650.265 ↗
61. A low-cost lightweight entropic alloy with high strength10.1007/s11665-018-3720-0 ↗
62. Microstructure, phase formation and heat-treating of novel cast Al-Mg-Zn-Cu-Si lightweight complex concentrated aluminum based alloy10.3390/ma15093169 ↗
63. Microstructure, mechanical and wear properties of low-density cast medium and high entropy aluminium alloys
64. Modeling and experimental results of selected lightweight complex concentrated alloys, before and after heat treatment10.3390/ma13194330 ↗
65. Synthesis and characterization of aluminium based multicomponent alloys10.1016/j.matpr.2021.02.066 ↗
66. Morphological evolution and growth mechanism of primary Mg2Si phase in Al-Mg2Si alloys10.1016/j.actamat.2010.10.036 ↗