Tribological behavior of the friction film of polycrystalline diamond compact and different matching materials in drilling fluid
Source abstract
Abstract
The tribological properties of polycrystalline diamond compact (PDC) with different matching pairs (Al 2O 3, ZrO 2 , and GCr15 balls) in drilling fluid were studied. The friction coefficient, microstructure, wear rate, three-dimensional surface morphology, and transfer behavior of the friction film of different balls and PDC were analyzed experimentally. The results showed that there are significant differences in friction and wear behavior between PDC and different balls in the drilling fluid environment. In addition, the surface of PDC will form a friction-protective film in the presence of drilling fluid. Different friction pairs exhibit different degrees of damage to the protective film and form a transfer film during the friction process. When the protective film on PDC is destroyed, small particles in the drilling fluid can fill the groove area to repair and prevent further friction and wear.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tunneling and Rock Mechanics · Metal Alloys Wear and Properties · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Measurement of high flexibility components in composite material by touch probe and force sensing resistors10.1016/j.jmapro.2019.07.038 ↗
2. Higher photocatalytic removal of organic pollutants using pangolin-like composites made of 3–4 at. layers of MoS2 nanosheets deposited on tourmaline10.1007/s10311-021-01235-6 ↗
3. Facile synthesis of FeS2/MoS2 composite intertwined on rGO nanosheets as a high-performance anode material for sodium-ion battery10.1016/j.jallcom.2019.153222 ↗
4. Novel fabrication of a sepiolite supported cobalt-based catalyst via a coprecipitation-reduction method10.1016/j.clay.2020.105909 ↗
5. Tourmaline-modified FeMnTiOx catalysts for improved low-temperature NH3-SCR performance10.1021/acs.est.9b02620 ↗
6. Surface oxygenate species on TiC reinforce cobalt-catalyzed Fischer-Tropsch synthesis10.1021/acscatal.1c00150 ↗
7. Impact fatigue fracture of polycrystalline diamond compact (PDC) cutters and the effect of microstructure10.1016/j.ijrmhm.2014.06.003 ↗
8. Thermal residual stress of polycrystalline diamond compacts10.1016/S1003-6326(09)60126-6 ↗
9. Tribological properties of copper alloy-based composites reinforced with tungsten carbide particles10.1016/j.wear.2011.01.015 ↗
10. Correlation of specific energy of cutting saws and drilling bits with rock brittleness and destruction energy10.1016/j.jmatprotec.2008.06.004 ↗
11. Effect of removing internal residual metallic phases on wear resistance of polycrystalline diamond compacts10.1016/j.ijrmhm.2011.10.014 ↗
12. Friction and wear behavior of polycrystalline diamond at temperatures up to 700 °c10.1016/j.ijrmhm.2011.04.011 ↗
13. Improvement of ambient temperature tribological properties of polycrystalline diamond compact treated by cobalt removal10.1016/j.diamond.2021.108567 ↗
14. Effect of different acid corrosion reagents on de-cobalt effect and performance of PDC at room temperature
15. Improving the rheological properties and thermal stability of water-based drilling fluid using biogenic silica nanoparticles10.1016/j.egyr.2021.08.130 ↗
16. Influence of additives on the friction and wear reduction of oil-based drilling fluid10.1016/j.wear.2019.01.028 ↗
17. Water-based bentonite drilling fluids modified by novel biopolymer for minimizing fluid loss and formation damage10.1016/j.colsurfa.2016.07.092 ↗
18. Clay swelling - A challenge in the oilfield10.1016/j.earscirev.2009.11.003 ↗
19. Performance and wear mechanisms of PCD and pcBN cutting tools during machining titanium alloy Ti6Al4V
20. Intelligent approach for process modelling and optimization on electrical discharge machining of polycrystalline diamond10.1007/s10845-018-1443-6 ↗
21. Nanomolybdenum disulfide additive improves the tribological behavior of cobalt removal polycrystalline diamond compact10.1016/j.triboint.2022.107896 ↗
22. Influence of frictional interface state on tribological performance of sintered polycrystalline diamond sliding against different mating materials10.1007/s11249-019-1196-1 ↗
23. Friction behavior of polycrystalline diamond compact and the evolution of the friction film under different matching materials10.1016/j.ijrmhm.2023.106313 ↗
24. Wear resistance and thermal stability enhancement of PDC sintered with Ti-coated diamond and cBN10.1016/j.ijrmhm.2020.105278 ↗
25. High-temperature annealing of polycrystalline diamond compact with cobalt removal and evolution of tribological properties of grinding balls10.1016/j.diamond.2022.109073 ↗
26. High-temperature annealing of polycrystalline diamond compact with cobalt removal and evolution of tribological properties of grinding balls10.1016/j.diamond.2022.109073 ↗
27. Evaluating the influence of tooth surface wear on TVMS of planetary gear set10.1016/j.mechmachtheory.2019.03.014 ↗
28. PCD after cobalt leaching reinforced by high temperature annealing: Tribological properties and graphitization evolution10.1016/j.diamond.2022.108988 ↗
29. Effects of Al on microstructure and tensile properties of C-bearing high Mn TWIP steel10.1016/j.actamat.2011.12.004 ↗
30. Grain refinement of AZ31 magnesium alloy by new Al-Ti-C master alloys10.1016/S1003-6326(08)60406-9 ↗
31. Formation of a carbonaceous film on the surface of Cu in a bovine serum albumin solution10.1016/j.surfcoat.2018.11.095 ↗
32. Particulate matter generation properties from sliding parts made of various carbonaceous films10.1007/s11249-018-1103-1 ↗
33. Effects of supply of fine oxide particles onto rubbing steel surfaces on severe-mild wear transition and oxide film formation10.1016/j.triboint.2008.01.001 ↗
34. Influence of oil-water ratio on the wear of Cr13 casing lubricated with drilling fluid
35. Tribological properties of rock bit journal bearings for journal with nanosecond laser surface texture10.1080/10402004.2020.1787567 ↗
36. Overview of wear performance of aluminium matrix composites reinforced with ceramic materials under the influence of controllable variables10.1016/j.ceramint.2015.08.150 ↗
37. Tribofilm formation mechanism and friction behavior of polycrystalline diamond compact after cobalt leaching added molybdenum disulfide nanoparticles in different base oils10.1016/j.ijrmhm.2023.106101 ↗
38. Performance of polycrystalline diamond compact bit based on laboratory tests assuming geothermal well drilling10.1016/j.geothermics.2019.03.006 ↗
39. Study on the tribological properties of diamond and SiC interactions using atomic scale numerical simulations10.1016/j.triboint.2022.108093 ↗
40. Effect of water adsorption on the frictional properties of hydrogenated amorphous carbon films in various relative humidities10.1021/acs.langmuir.0c02416 ↗
41. Effect of rotation speed on the abrasive–erosive–corrosive wear of steel pipes against steel casings used in drilling for petroleum10.1016/j.wear.2018.06.002 ↗
42. Effect of water-mixed polyvinyl alcohol viscosity on wear response of carbon steel exposed to an eroding medium10.1007/s11665-021-05483-z ↗
43. Insight into polymer concentration, temperature, CO2 content, and Cl− content on corrosion of N80 steel tubing in polymer flooding10.1002/maco.202213687 ↗
44. The effect of temperature and sliding speed on friction and wear of Si3N4, Al2O3, and ZrO2 balls tested against AlCrN PVD coating10.1016/j.triboint.2017.05.035 ↗
45. Tribological behavior of biomedical grade UHMWPE with graphite-based fillers against EBM-Ti6Al4V pin under various lubricating conditions10.1002/app.52313 ↗
46. Effect of atomic oxygen erosion on mechanical and tribological properties of Cr and B doped hydrogen-containing diamond-like carbon films10.1016/j.diamond.2023.109813 ↗
47. Investigation on surface morphology and crystalline phase deformation of Al80Li5Mg5Zn5Cu5 high-entropy alloy by ultra-precision cutting10.1016/j.matdes.2019.108367 ↗
48. Influence of hardness and roughness on the tribological performance of TiC/a-C nanocomposite coatings10.1016/j.surfcoat.2010.10.021 ↗
49. Selected papers from the 73rd Annual Congress of the Slovak and Czech Chemical Societies10.1007/s00706-022-02998-6 ↗
50. Tribological mechanism of hydrogenated amorphous carbon film against pairs: a physical description10.1063/1.3619798 ↗
51. On the significance of the H/E ratio in wear control: A nanocomposite coating approach to optimised tribological behaviour10.1016/S0043-1648(00)00488-9 ↗
52. Application of nanomaterials in reservoir protection10.4028/www.scientific.net/AMM.204-208.699 ↗
53. Study and application on the oil-film method used for reservoir protection drilling and completion fluid systems10.1080/01932690903224599 ↗
54. Effects of nano-SiO2 addition in drilling fluid on wear behavior of 2Cr13 steel casing10.1007/s11249-019-1253-9 ↗