Texture tailoring and microstructure refinement induced by {11−21} and {10−12} twinning in an extruded Mg-Gd alloy
Source abstract
Abstract
An extruded Mg-17Gd (wt%) alloy with < 0001 > fiber texture was compressed along different directions at room temperature. Electron backscatter diffraction characterization was used to investigate the texture tailoring, twinning and dynamic recrystallization (DRX) behaviors. The results indicate that {10−12} and {11−21} twinning activated. The [0001] pole tilted to compression direction with the strain increasing and twinning dominated the texture transition. Activation of {10−12} twinning can be governed by Schmid law, while it is more appropriate to explain the activation of {11−21} twinning by the basal slip transfer condition in the twinned grains according to the slip trace analysis. In addition, operation of {11−21} twinning can facilitate the nucleation of {10−12} twin in the same grain by changing Schmid factor (SF) in the vicinities of {11−21} twin. Grain refinement occurred in the specimens with large strain and the average grain size decrease from ∼27 µm to ∼12 µm. The mechanism of grain refinement can be summarized as follows: the mobility of twin boundaries will be restricted because of the twin-twin and dislocation-twin interaction and converted to random high angle grain boundaries (HAGBs). The random HAGBs offer the nucleation sites and the strain accumulation within twins offer the driving force which facilitate the formation of DRXed grains at random HAGBs. Additionally, the SF difference within parent grain may result in the formation of HAGBs, and these HAGBs can connected the random HAGBs that result from the dislocation-twin interaction which result in the formation of new grains.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Alloying design and microstructural control strategies towards developing Mg alloys with enhanced ductility10.1016/j.jma.2022.04.002 ↗
2. Achieving exceptionally high strength in binary Mg-13Gd alloy by strong texture and substantial precipitates10.1016/j.scriptamat.2020.10.052 ↗
3. Development of high-strength magnesium alloys via combined processes of extrusion, rolling and ageing10.1016/j.scriptamat.2011.01.042 ↗
4. The role of bimodal-grained structure in strengthening tensile strength and decreasing yield asymmetry of Mg-Gd-Zn-Zr alloys10.1016/j.msea.2017.09.125 ↗
5. Fabrication of a high strength Mg–11Gd–4.5Y–1Nd–1.5Zn–0.5Zr (wt%) alloy by thermomechanical treatments10.1016/j.msea.2014.10.077 ↗
6. Microstructure evolution and mechanical properties of a high strength Mg-11.7Gd-4.9Y-0.3Zr (wt%) alloy prepared by pre-deformation annealing, hot extrusion and ageing10.1016/j.msea.2017.06.096 ↗
7. Preparation of ultra-high strength Mg-Gd-Y-Zn-Zr alloy by pre-ageing treatment prior to extrusion10.1016/j.jallcom.2021.162490 ↗
8. Effect of trace zinc on the microstructure and mechanical properties of extruded Mg-Gd-Y-Zr alloy10.1016/j.jallcom.2019.03.066 ↗
9. Effects of grain refinement and precipitate strengthening on mechanical properties of double-extruded Mg-12Gd-2Er-0.4Zr alloy10.1016/j.jallcom.2021.162873 ↗
10. An Unusual Extrusion Texture in Mg-Gd-Y-Zr Alloys10.1002/adem.201500516 ↗
11. Microstructure and texture variation with Gd addition in extruded magnesium10.1016/j.jallcom.2016.10.179 ↗
12. An Unusual Texture Evolution in Extruded Mg-14Gd-Based Alloy during Annealing10.1002/adem.201701129 ↗
13. Cold rollability improvement by twinning and twin-slip synergy in an Mg-Zn-Gd alloy with rare earth texture10.1016/j.jallcom.2021.160813 ↗
14. Twinning-mediated texture weakening in a basal-textured Mg-6Al-1Zn (mass%) alloy sheet by a novel cold-sample rolling method10.1016/j.jallcom.2022.167154 ↗
15. Suppressing the tension–compression yield asymmetry of Mg alloy by hybrid extension twins structure10.1016/j.msea.2012.12.094 ↗
16. Unveiling the ductility enhancement mechanisms in AZ31 magnesium alloy achieved via shear strain-assisted twin orientation regulation10.1016/j.jallcom.2023.169698 ↗
17. Twin recrystallization mechanisms in a high strain rate compressed Mg-Zn alloy10.1016/j.jma.2019.12.011 ↗
18. Microstructure, texture and mechanical properties of extruded AZ31 Mg alloy during small strain multi-directional forging with gradient cooling10.1016/j.jallcom.2022.164795 ↗
19. Influence of twinning-induced recrystallization on texture evolution in a high strain rate compressed Mg-Zn alloy10.1016/j.matchar.2020.110192 ↗
20. Microstructure and texture optimization by static recrystallization originating from {10-12} extension twins in a Mg-Gd-Y alloy10.1016/j.jmst.2020.04.040 ↗
21. In-situ EBSD analysis of microstructural evolution and damage behavior of Mg-Al-Ca-Mn alloys with different extrusion ratios10.1016/j.matchar.2023.112781 ↗
22. Influence of pre-twinning on adiabatic shear sensitivity of AM30 magnesium alloy10.1016/j.matchar.2022.112323 ↗
23. The influence of gadolinium concentration on the twin propagation rate in magnesium alloys10.1016/j.jallcom.2023.169635 ↗
24. Observation of {1121} twinning in a Mg-based alloy10.1080/09500830802070793 ↗
25. The effect of high yttrium solute concentration on the twinning behaviour of magnesium alloys10.1016/j.actamat.2014.09.022 ↗
26. The effect of basal dislocation on 112¯1 twin boundary evolution in a Mg-Gd-Y-Zr alloy10.1016/j.jmst.2020.11.062 ↗
27. Oriented nucleation causing unusual texture transition during static recrystallization annealing in cold-rolled Mg–Zn–Gd alloys10.1016/j.scriptamat.2020.07.037 ↗
28. Orientations of nuclei during static recrystallization in a cold-rolled Mg-Zn-Gd alloy10.1016/j.jmst.2020.05.027 ↗
29. Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK6010.1016/S1359-6454(01)00020-9 ↗
30. Dynamic recrystallization in pure magnesium
31. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
32. Dynamic recrystallization during high temperature deformation of magnesium10.1016/j.msea.2008.02.004 ↗
33. An investigation of dynamic recrystallization behavior of ZK60-Er magnesium alloy10.1016/j.msea.2014.06.058 ↗
34. Twinning, recrystallization and texture development during multi-directional impact forging in an AZ61 Mg alloy10.1016/j.jallcom.2015.07.281 ↗
35. Evolution of microstructure and microtexture during the hot deformation of Mg–3% Al10.1016/j.actamat.2010.04.017 ↗
36. Unveiling the formation of basal texture variations based on twinning and dynamic recrystallization in AZ31 magnesium alloy during extrusion10.1016/j.actamat.2018.07.014 ↗
37. The role of twinning and untwinning in yielding behavior in hot-extruded Mg–Al–Zn alloy10.1016/j.actamat.2006.09.010 ↗
38. Effect of crystal orientation on the mechanical properties and strain hardening behavior of magnesium alloy AZ31 during uniaxial compression10.1016/j.msea.2011.12.013 ↗
39. Correlation of crystal orientation, crystal morphology and mechanical properties of directionally solidified Mg-xGd alloys10.1016/j.jallcom.2022.166512 ↗
40. Microstructures and textures of pure magnesium deformed in plane-strain compression10.1016/j.scriptamat.2004.07.002 ↗
41. Interactions between non-screw lattice dislocations and coherent twin boundaries in face-centered cubic metals10.1016/j.actamat.2007.11.020 ↗
42. Atomic-resolution studies on reactions between basal dislocations and {101¯2} coherent twin boundaries in a Mg alloy10.1016/j.jmst.2020.06.017 ↗
43. Role of {10–12} twinning characteristics in the deformation behavior of a polycrystalline magnesium alloy10.1016/j.actamat.2010.07.002 ↗
44. The influence of temperature on twinning behavior of a Mg-Gd-Y alloy during hot compression10.1016/j.msea.2018.08.004 ↗
45. Dependence of twinned volume fraction on loading mode and Schmid factor in randomly textured magnesium10.1016/j.actamat.2017.03.017 ↗
46. Reasonable utilization of {10-12} twin for optimizing microstructure and improving mechanical property in a Mg-Gd-Y alloy10.1016/j.matdes.2020.108600 ↗
47. Compatibility of Dependence on Deformation in Two-Phase Ti-AI Alloys: Microstructure and Orientation Relationships10.1007/BF02670762 ↗
48. Anomalous effects of strain rate on the room-temperature ductility of a cast Mg-Gd-Y-Zr alloy10.1016/j.actamat.2018.08.013 ↗
49. Dislocation twin transmutations during interaction between prismatic slip and {101¯1} twin in magnesium10.1016/j.actamat.2020.01.010 ↗
50. Twinning and the ductility of magnesium alloys10.1016/j.msea.2006.12.037 ↗
51. Twinning and the ductility of magnesium alloys10.1016/j.msea.2007.02.109 ↗
52. Role of slip and {10-12} twin on the crystal plasticity in Mg-RE alloy during deformation process at room temperature10.1016/j.jmst.2021.01.006 ↗
53. Insights into microstructural evolution and deformation behaviors of a gradient textured AZ31B Mg alloy plate under hypervelocity impact10.1016/j.jmst.2021.02.049 ↗
54. Microstructural evolution and grain growth mechanism of pre-twinned magnesium alloy during annealing10.1016/j.jma.2020.11.015 ↗
55. Nano-sized twins induce high rate sensitivity of flow stress in pure copper10.1016/j.actamat.2005.01.031 ↗
56. Abnormal migration of twin boundaries in rolled AZ31 alloy containing intersecting {101¯2} extension twins10.1016/j.jallcom.2016.08.154 ↗
57. Structural characteristics of {1¯012} non-cozone twin-twin interactions in magnesium10.1016/j.actamat.2018.08.004 ↗
58. Evaluating the effect of yttrium as a solute strengthener in magnesium using in situ neutron diffraction10.1016/j.actamat.2014.06.023 ↗
59. Relationship between fatigue crack initiation and activated twins in as-extruded pure magnesium10.1016/j.scriptamat.2013.08.006 ↗
60. An experimental study of anisotropic fracture behavior of rolled AZ31B magnesium alloy under monotonic tension10.1016/j.msea.2021.142193 ↗
61. Deformation microstructures and textures of some cold rolled Mg alloys10.1016/S0921-5093(04)00942-6 ↗
62. On the role of non-basal deformation mechanisms for the ductility of Mg and Mg–Y alloys10.1016/j.actamat.2010.08.031 ↗
63. Effect of gadolinium on the deformation and recrystallization behavior of magnesium crystals10.1016/j.actamat.2022.118312 ↗