journal article·2023-11

Achieving a strength-ductility combination in VCoNi medium-entropy alloy via N alloying

Fengshan Yu, Dingfeng Xu, Mingliang Wang, Lei Li, Yiping Lu

Publisher page

Abstract

Single-phase FCC-structured medium-entropy alloys (MEAs) have excellent ductility, but the low strength limits their applications in engineering. In this study, non-equiatomic V 32Co 33Ni 33Cr 1N 1 MEA was prepared by vacuum arc melting, and its comprehensive mechanical properties were improved by nitrogen alloying and subsequent thermo-mechanical processing. Compared with the VCoNi MEA, it was observed that nitrogen alloying inhibited the recrystallization process and contributed to the formation of nitride precipitates at the grain boundaries, significantly refining the grains. Among them, the alloy subjected to cold rolling and annealing at 900 ℃ exhibited a high yield stress of ∼ 1.1 GPa, an ultimate tensile stress of ∼ 1.5 GPa, and possessed a high fracture elongation of ∼ 25.3 %. The outstanding mechanical properties were mainly attributed to the grain refinement strengthening resulting from the nitrogen alloying and multiple twins strengthening containing annealing twins, deformation twins and multiple twinning systems. This work was expected to aid in understanding the effect of nonmetallic elements alloying on the microstructures and mechanical properties of MEAs, high-entropy alloys and traditional alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
3. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
4. Lightweight, ultrastrong and high thermal-stable eutectic high-entropy alloys for elevated-temperature applications10.1016/j.actamat.2023.118806 ↗
5. Ultrastrong medium-entropy single-phase alloys designed via severe lattice distortion10.1002/adma.201807142 ↗
6. Ultra-strong and strain-hardenable ultrafine-grained medium-entropy alloy via enhanced grain-boundary strengthening10.1080/21663831.2021.1913768 ↗
7. Analysis of deformation behavior of VCoNi medium-entropy alloy at temperatures ranging from 77 K to 573 K10.1016/j.intermet.2021.107126 ↗
8. A strong and ductile medium-entropy alloy resists hydrogen embrittlement and corrosion
9. Ultrahigh cryogenic strength and exceptional ductility in ultrafine-grained CoCrFeMnNi high-entropy alloy with fully recrystallized structure10.1016/j.mtnano.2018.12.002 ↗
10. Strong grain-size effect on deformation twinning of an Al0.1CoCrFeNi high-entropy alloy10.1080/21663831.2016.1257514 ↗
11. High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys10.1038/s41467-018-06600-8 ↗
12. Enhanced strength-ductility synergy in a novel V-containing γ''-strengthened CoCrNi-based multi-component alloy10.1016/j.msea.2021.141289 ↗
13. The effect of solid-solution temperature on phase composition, tensile characteristics and fracture mechanism of V-containing CrMn-steels with high interstitial content C+N > 1 mass. %10.1016/j.msea.2019.138534 ↗
14. Strengthening of Fe40Mn40Co10Cr10 high entropy alloy via Mo/C alloying10.1016/j.matlet.2018.02.065 ↗
15. Shear band-driven precipitate dispersion for ultrastrong ductile medium-entropy alloys
16. A dual-phase alloy with ultrahigh strength-ductility synergy over a wide temperature range10.1126/sciadv.abi4404 ↗
17. Effects of Al alloying on microstructure and mechanical properties of VCoNi medium entropy alloy10.1016/j.msea.2021.141054 ↗
18. Effect of solid-solution strengthening on deformation mechanisms and strain hardening in medium-entropy V1−xCrxCoNi alloys10.1016/j.jmst.2021.07.042 ↗
19. Effect of Ta content on stacking fault energy and microstructure characteristics of (VCoNi)100−XTaX (X=0, 0.05, 0.5 and 1) medium entropy alloy10.1016/j.matlet.2021.130770 ↗
20. Enhancing the strength and ductility of CoCrFeMnNi high-entropy alloy by nitrogen addition10.1016/j.msea.2020.139587 ↗
21. Mechanism of dislocation evolution during plastic deformation of nitrogen-doped CoCrFeMnNi high-entropy alloy10.1016/j.msea.2021.141235 ↗
22. Nitrogen-induced hardening in an austenitic CrFeMnNi high-entropy alloy (HEA)10.1016/j.msea.2020.140725 ↗
23. Effect of nitrogen on mechanical properties of CoCrFeMnNi high entropy alloy at room and cryogenic temperatures10.1016/j.jallcom.2020.156633 ↗
24. Strengthening of ultrafine-grained equiatomic CoCrFeMnNi high-entropy alloy by nitrogen addition
25. Carbide precipitation strengthening in fine-grained carbon-doped FeCoCrNiMn high entropy alloy10.1016/j.jallcom.2019.06.204 ↗
26. Investigating the micro and nanomechanical properties of CoCrFeNi-Cx high-entropy alloys containing eutectic carbides10.1016/j.msea.2020.140065 ↗
27. Novel Si-added CrCoNi medium entropy alloys achieving the breakthrough of strength-ductility trade-off10.1016/j.matdes.2020.109202 ↗
28. Nitrogen induced heterogeneous structures overcome strength -ductility trade-off in an additively manufactured high-entropy alloy
29. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
30. Effects of cryogenic temperature on tensile and impact properties in a medium-entropy VCoNi alloy10.1016/j.jmst.2021.02.034 ↗
31. Strengthening of CoCrNi medium entropy alloy with gadolinium additions10.1016/j.vacuum.2023.111969 ↗
32. Effects of yttrium addition on microstructures and mechanical properties of CoCrNi medium entropy alloy10.1016/j.intermet.2021.107405 ↗
33. Synergy effect of multi-strengthening mechanisms in FeMnCoCrN HEA at cryogenic temperature10.1016/j.jmst.2020.12.079 ↗
34. Carbon and nitrogen co-doping enhances phase stability and mechanical properties of a metastable high-entropy alloy10.1016/j.jallcom.2020.154799 ↗
35. The role of carbon in grain refinement of cast CrFeCoNi high-entropy alloys10.1007/s11661-018-4549-8 ↗
36. Effects of deformation and annealing on the microstructures and properties of a nonequiatomic Co29Cr29Fe29Ni12.5W0.5 high-entropy alloy10.1016/j.msea.2020.140548 ↗
37. Affect of the tempering temperature on the microstructure and mechanical properties of dual phase steels10.1016/j.msea.2011.10.056 ↗
38. On the mechanical heterogeneity in dual phase steel grades: Activation of slip systems and deformation of martensite in DP80010.1016/j.actamat.2019.11.002 ↗
39. Atomic scale effects of alloying, partitioning, solute drag and austempering on the mechanical properties of high-carbon bainitic-austenitic TRIP steels10.1016/j.actamat.2012.07.064 ↗
40. Hierarchical microstructure design of a bimodal grained twinning-induced plasticity steel with excellent cryogenic mechanical properties10.1016/j.actamat.2018.06.019 ↗
41. Multi-heterostructure and mechanical properties of N-doped FeMnCoCr high entropy alloy10.1016/j.ijplas.2021.102965 ↗
42. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
43. The effect of nitrogen on the stacking fault energy in Fe-15Mn-2Cr-0.6C-xN twinning-induced plasticity steels10.1016/j.scriptamat.2014.08.004 ↗
44. Influences of nitrogen alloying on microstructural evolution and tensile properties of CoCrFeMnNi high-entropy alloy treated by cold-rolling and subsequent annealing10.1016/j.msea.2020.139472 ↗
45. The effect of carbon on the microstructures, mechanical properties, and deformation mechanisms of thermo-mechanically treated Fe40.4Ni11.3Mn34.8Al17.5Cr6 high entropy alloys10.1016/j.actamat.2016.12.074 ↗
46. Aging-dependent coupling effect of multiple precipitates on the ductile fracture of heat-treatable aluminum alloys10.1016/j.msea.2008.09.012 ↗
47. Precipitation structure and strengthening mechanisms in an Al-Cu-Mg-Ag alloy10.1016/j.msea.2017.06.110 ↗
48. Accessing enhanced uniformity and property in CuNiSiCr alloy by high-temperature recrystallization10.1016/j.msea.2019.138281 ↗
49. Microstructure and strengthening mechanisms in an FCC structured single-phase nanocrystalline Co25Ni25Fe25Al7.5Cu17.5 high-entropy alloy10.1016/j.actamat.2016.01.050 ↗
50. Enhancement of strength and ductility in non-equiatomic CoCrNi medium-entropy alloy at room temperature via transformation-induced plasticity10.1016/j.msea.2020.140516 ↗
51. C and N doping in high-entropy alloys: a pathway to achieve desired strength-ductility synergy
52. Strong and ductile non-equiatomic high-entropy alloys: design, processing, microstructure, and mechanical properties10.1007/s11837-017-2540-2 ↗
53. Enhanced strength-ductility synergy in a Ta-doped CoCrNi medium-entropy alloy with a dual heterogeneous structure10.1016/j.msea.2022.144293 ↗
54. Twinning-induced plasticity (TWIP) steels10.1016/j.actamat.2017.06.046 ↗
55. Dislocation mechanisms and 3D twin architectures generate exceptional strength-ductility-toughness combination in CrCoNi medium-entropy alloy
56. Dynamic shear deformation of a CrCoNi medium-entropy alloy with heterogeneous grain structures10.1016/j.actamat.2018.02.016 ↗
57. Simultaneous enhancement of strength and ductility in a NiCoCrFe high-entropy alloy upon dynamic tension: micromechanism and constitutive modeling10.1016/j.ijplas.2019.08.013 ↗
58. High tensile ductility in a nanostructured metal10.1038/nature01133 ↗
59. Enhancing strength and strain hardenability via deformation twinning in fcc-based high entropy alloys reinforced with intermetallic compounds10.1016/j.actamat.2018.12.010 ↗
60. Tuning element distribution, structure and properties by composition in high-entropy alloys10.1038/s41586-019-1617-1 ↗
61. Multistage work hardening assisted by multi-type twinning in ultrafine-grained heterostructural eutectic high-entropy alloys10.1016/j.mattod.2020.09.029 ↗