journal article·2023-07Open access

Improving embrittlement in the Ti-Al-C MAX phase system: A composite approach for surface severe plastic deformation

Adrien Heinzelmeier, Antoine Guitton, Marc Novelli, Wenbo Yu, Thierry Grosdidier

Abstract

Ti 2AlC and Ti 3AlC 2 belong to an interesting family of layered compounds called MAX phases. A composite approach is tested here to improve the intrinsic brittle behaviour of such compounds. To this end, a bulk MAX compound and a MAX/TiAl 2 composite have been deformed under surface severe plastic deformation (SSPD) by surface mechanical attrition treatment (SMAT). Grain delamination and grain decohesion occurred to a depth of 100 µm below the surface for the bulk compound. Resulting cracks and grain pullouts were witnessed by a decrease in the surface and sub-surface hardness. Comparatively, the presence of intergranular TiAl 2 effectively prevented such failure for the composite . Thus, the SSPD of this cohesive composite created a surface hardening (+60%) gradient extending down to a depth of 250 µm. Witness marks of plasticity were revealed in both the MAX and TiAl 2 phases.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: MXene and MAX Phase Materials · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. The max phases: Unique new carbide and nitride materials10.1511/2001.28.334 ↗
2. Elastic and mechanical properties of the MAX phases10.1146/annurev-matsci-062910-100448 ↗
3. Synthesis and characterization of a remarkable ceramic: Ti3SiC210.1111/j.1151-2916.1996.tb08018.x ↗
4. Effect of microstructure anisotropy on the deformation of MAX polycrystals studied by in-situ compression combined with neutron diffraction10.1063/1.4884601 ↗
5. On the relevance of kinking to reversible hysteresis in MAX phases10.1016/j.actamat.2014.01.045 ↗
6. M.W. Barsoum, L. Farber, T. El-Raghy, Dislocations, Kink Bands, and Room-Temperature Plasticity of Ti 3 SiC 2, (1999) 1727–1738.10.1007/s11661-999-0172-z ↗
7. Pressure-enforced plasticity in MAX phases: From single grain to polycrystal investigation10.1080/14786435.2012.755272 ↗
8. On the non-classical crystallographic slip in Tin+1AlCn MAX phases10.1016/j.scriptamat.2020.113698 ↗
9. Evidence of dislocation cross-slip in MAX phase deformed at high temperature10.1038/srep06358 ↗
10. Deformation mechanisms during high temperature tensile creep of Ti3AlC2MAX phase10.1016/j.jallcom.2016.09.194 ↗
11. Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment10.1016/j.msea.2003.10.261 ↗
12. Development of surface nano-crystallization in alloys by surface mechanical attrition treatment (SMAT)10.1080/10408436.2014.978446 ↗
13. Incorporating the principles of shot peening for a better understanding of surface mechanical attrition treatment (SMAT) by simulations and experiments10.1016/j.matdes.2016.12.045 ↗
14. Recent developments in the application of surface mechanical attrition treatments for improved gradient structures: Processing parameters and surface reactivity10.2320/matertrans.MF201929 ↗
15. Literature review on the mechanical properties of materials after surface mechanical attrition treatment (SMAT)10.1016/j.nanoms.2020.04.002 ↗
16. On the effectiveness of surface severe plastic deformation by shot peening at cryogenic temperature10.1016/j.apsusc.2016.08.009 ↗
17. In-depth quantitative analysis of the microstructures produced by Surface Mechanical Attrition Treatment (SMAT)10.1016/j.matchar.2013.06.006 ↗
18. Surface severe plastic deformation of AISI 304 via conventional shot peening, severe shot peening and repeening10.1016/j.apsusc.2015.05.093 ↗
19. Elastic and mechanical properties of the MAX phases10.1146/annurev-matsci-062910-100448 ↗
20. Oxidation mechanisms in bulk Ti2AlC: Influence of the grain size10.1016/j.jeurceramsoc.2020.01.042 ↗
21. T. Nakano, A. Negishi, K. Hayashi, Y. Umakoshi, Ordering process of Al5Ti3, h-Al2Ti and r-Al2Ti with F.C.C.-based long-period superstructures in rapidly solidified Al-rich TiAl alloys., n.d.
22. Synthesis, characterization, and intrinsic hardness of layered nanolaminate Ti 3 AlC 2 and Ti 3 Al 0.8 Sn 0.2C 2 solid solution10.1111/j.1551-2916.2011.04846.x ↗
23. Reassessment of the binary aluminum-titanium phase diagram10.1361/154770306X109809 ↗
24. Synthesis and characterization of Ti3AlC210.1111/j.1151-2916.2000.tb01281.x ↗
25. Microstructural evolution and hardness of TiAl 3 and TiAl 2 phases on Ti-45Al-2Nb-2Mn-1B by plasma pack aluminizing10.1016/j.apsusc.2013.03.043 ↗
26. B. Beausir, J.-J. Fundenberger, Analysis tools for electron and X-ray diffraction, ATEX—software, Available Online: Www. Atex-Software. Eu (Accessed on 28 March 2022). (2017).
27. P. Morin, M. Pitaval, E. Vicario, G. Fontaine, Scanning Electron Microscope Observation of Single Defects in Solid Crystalline Materials, 1979.10.1002/sca.4950020403 ↗
28. Electron–channelling imaging in scanning electron microscopy10.1080/01418617908234856 ↗
29. Modelling electron channeling contrast intensity of stacking fault and twin boundary using crystal thickness effect10.3390/ma14071696 ↗
30. Fundamental and experimental aspects of diffraction for characterizing dislocations by electron channeling contrast imaging in scanning electron microscope10.1038/s41598-017-09756-3 ↗
31. Modeling dislocation contrasts obtained by accurate-electron channeling contrast imaging for characterizing deformation mechanisms in bulk materials10.3390/ma12101587 ↗
32. Dislocation analysis of Ti 2AlN deformed at room temperature under confining pressure10.1080/14786435.2012.715250 ↗
33. Micromechanisms of brittle fracture10.1007/BF02656622 ↗
34. Humphreys · 2004
35. Effects of SMAT at cryogenic and room temperatures on the kink band and martensite formations with associated fatigue resistance in a β-metastable titanium alloy10.1016/j.msea.2020.140618 ↗
36. Synthesis, microstructure and properties of (Ti1−x, Mox)2AlC phases10.1080/02670836.2017.1419614 ↗
37. Recently synthesized (Ti1-: X Mo x)2AlC (0 ≤ x ≤ 0.20) solid solutions: Deciphering the structural, electronic, mechanical and thermodynamic properties via ab initio simulations10.1039/D0RA06435A ↗
38. Syntheses and physical properties of the MAX phase boride Nb2SB and the solid solutions N b2 S Bx C1-x(x=0-1)
39. Physical properties of new MAX phase borides M2SB (M = Zr, Hf and Nb) in comparison with conventional MAX phase carbides M2SC (M = Zr, Hf and Nb): comprehensive insights10.1016/j.jmrt.2021.01.068 ↗
40. High-entropy M2AlC-MC (M=Ti, Zr, Hf, Nb, Ta) composite: synthesis and microstructures10.1016/j.scriptamat.2020.03.015 ↗
41. Phase transformation and amorphization resistance in high-entropy MAX phase M2SnC (M = Ti, V, Nb, Zr, Hf) under in-situ ion irradiation10.1016/j.actamat.2022.118222 ↗