journal article·2023-07

Revealing the role of SO2 in the high-temperature corrosion diffusion of two superalloys in CO2 through molecular dynamics and thermal stability

Tingshan Guo, Haomin Wu, Huaishuang Shao, Qinxin Zhao, Zhiyuan Liang

Publisher page

Abstract

The corrosion behavior of HR230 and 740 H alloys in CO 2 and CO 2 with 0.5% SO 2 at 1000 ℃ was studied by molecular dynamics, thermodynamics and experiments. The weight gain of both alloys in CO 2 environment was increased with the addition of 0.5% SO 2, in which the weight gain of 740 H alloy was higher than that of HR230 alloy. Some CrS sulfides were observed in Cr 2O 3 oxide film of both alloys, while TiO 2 oxides on 740 H alloy could reduce the infiltration of S element. Thermodynamic calculations of the corrosion reactions showed that serious internal vulcanization and internal oxidation would occur in both alloys when the content of SO 2 exceeded 3%.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · nanoparticles nucleation surface interactions · Thermal and Kinetic Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Aviation gas turbine alternative fuels: a review10.1016/j.proci.2010.09.011 ↗
2. Development and key technologies in marine gas turbine
3. Development of gas turbines for power generation and gas transmission10.3103/S1068798X20090075 ↗
4. Corrosion behavior of T91 tubing in high temperature supercritical carbon dioxide environment10.1016/j.corsci.2022.110857 ↗
5. Materials selection in gas turbine engine design and the role of low thermal expansion materials10.1007/s11837-016-2071-2 ↗
6. S. Biswas, S. Ramachandra, P. Hans, S.P.S. Kumar, Materials for gas turbine engines: Present status, future trends and indigenous efforts, Journal of the Indian Institute of Science, 102 (2022) 297–309.10.1007/s41745-022-00295-z ↗
7. Alloys-By-Design: application to nickel-based single crystal superalloys10.1016/j.actamat.2009.08.018 ↗
8. Materials challenges in hydrogen-fuelled gas turbines10.1080/09506608.2021.1981706 ↗
9. Influence of Nb addition on the oxidation behavior of novel Ni-base superalloy10.1016/j.corsci.2021.109436 ↗
10. Hot tearing of nickel-based superalloys during directional solidification10.1016/S1359-6454(02)00042-3 ↗
11. Jang, Corrosion and carburization behavior of Al-rich surface layer on Ni-base alloy in supercritical-carbon dioxide environment10.1016/j.apsusc.2015.11.162 ↗
12. S.H. Kim, C. Kim, G.O. Subramanian, C. Jang, Corrosion and carburization behaviour of Ni-Cr-Mo-Nb superalloys in a high temperature supercritical-CO2 environment, Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications, (2018) 179–192.10.1007/978-3-319-89480-5_10 ↗
13. Effect of Ti and Ta on hot cracking susceptibility of directionally solidified Ni-based superalloy IN79210.1016/S1359-6462(02)00559-6 ↗
14. Influence of Ta content on hot corrosion behaviour of a directionally solidified nickel base superalloy10.1016/j.jallcom.2014.08.259 ↗
15. Materials issues for the design of industrial gas turbines
16. Hot corrosion behavior and evaluation of turbine components and materials used for gas turbine engine
17. Corrosion failures in gas turbine hot components
18. High temperature oxidation and corrosion of gas turbine materials in burner rig exposures10.1179/1743284712Y.0000000097 ↗
19. Hot corrosion behaviour of nickel-iron-based superalloy in gas turbine application10.1080/01430750.2018.1492446 ↗
20. Evaluating the hot corrosion behavior of high-temperature alloys for gas turbine engine components10.1007/s11837-015-1635-x ↗
21. High efficiency electric power generation: the environmental role10.1016/j.pecs.2006.08.002 ↗
22. Degradation of free-standing air plasma sprayed CoNiCrAlY coatings by vanadium and phosphorus pentoxides10.1016/j.surfcoat.2008.08.068 ↗
23. In bed and downstream hot gas desulphurization during solid fuel gasification: a review10.1016/j.fuproc.2010.02.005 ↗
24. Oxidation and hot corrosion behavior of nickel-based superalloy for gas turbine applications10.1080/10426914.2014.901530 ↗
25. High temperature oxidation and corrosion of gas turbine component materials in burner rig exposures10.3184/096034011X13198126967382 ↗
26. M.D. Trexler, P.M. Singh, T.H. Sanders, High temperature corrosion behavior of DS GTD-111 in oxidizing and sulfidizing environments, 11th International Symposium on Superalloys, (2008) 699–708.10.7449/2008/Superalloys_2008_699_708 ↗
27. Sulfide-oxide corrosion of the materials and coatings of gas turbine blades10.1134/S004060151102008X ↗
28. Improvement of sulfide-corrosion resistance of gas-turbine blades with sufficient heat resistance by rational alloying10.1007/BF02365752 ↗
29. Oxidation behaviour of cast Ni-Cr alloys in steam at 800 degrees C10.1179/1743284712Y.0000000103 ↗
30. ReaxFF: a reactive force field for hydrocarbons10.1021/jp004368u ↗
31. Development of the ReaxFF reactive force field for describing transition metal catalyzed reactions, with application to the initial stages of the catalytic formation of carbon nanotubes10.1021/jp046244d ↗
32. Development of a reactive force field for iron-oxyhydroxide systems10.1021/jp101332k ↗
33. Development and validation of a ReaxFF reactive force field for Fe/Al/Ni alloys: molecular dynamics study of elastic constants, diffusion, and segregation10.1021/jp308507x ↗
34. Reactive molecular dynamics study of chloride ion interaction with copper oxide surfaces in aqueous media10.1021/am201345v ↗
35. Characterization and simulation studies on the corrosion products of HR230 and 740 H alloys in CO2 with 7% H2O environment at 1000 ℃10.1016/j.corsci.2023.111009 ↗
36. ReaxFF molecular dynamics investigation on the oxidation mechanism of Fe surface in supercritical CO2 mixed with O210.1016/j.jcou.2022.102224 ↗
37. Development of a ReaxFF reactive force field for Fe/Cr/O/S and application to oxidation of butane over a pyrite-covered Cr2O3 catalyst10.1021/acscatal.5b01766 ↗
38. Atomistic modeling of oxide-carbide growth on FeCr alloy surface in high-temperature CO210.1016/j.corsci.2022.110391 ↗
39. High-temperature corrosion of an Fe–Ni-based alloy HR6W under various conditions at 750℃ and 810℃: effect of the temperature, water vapor, simulated ash and SO210.1016/j.matchemphys.2020.123670 ↗
40. Effect of pressure on the corrosion and carburization behavior of chromia-forming heat-resistant alloys in high-temperature carbon dioxide environments10.1016/j.corsci.2016.06.004 ↗
41. Effect of pressure on supercritical CO2 compatibility of structural alloys at 750 °C10.1002/maco.201508783 ↗
42. Effect of pressure and impurities on oxidation in supercritical CO210.1002/maco.201810652 ↗
43. Effect of SO2 in flue gas on coal ash hot corrosion of Inconel 740 alloy-A high temperature electrochemical sensor study10.1016/j.corsci.2013.07.012 ↗
44. Effect of sulfur and chlorine on fireside corrosion behavior of Inconel 740H superalloy10.1515/htmp-2016-0186 ↗
45. Corrosion of a stainless steel and nickel-based alloys in high temperature supercritical carbon dioxide environment10.1016/j.corsci.2012.11.041 ↗
46. Oxidation behavior of high-strength FeCrAl alloys in a high-temperature supercritical carbon dioxide environment10.1016/j.pnsc.2018.11.004 ↗