The investigations of rejuvenation heat treatment on the microstructure and mechanical properties of a serviced gas turbine blade
Source abstract
Abstract
Directionally solidified gas turbine blades are wildly used in land-based industrial gas turbines for power generation. During long-term service, the harsh service environment causes microstructural and mechanical deterioration of the blades. In order to increase usage and save costs, this study analyzed the microstructure damage in different sections of the blade. Meanwhile, this investigation discussed the optimum rejuvenation heat treatment parameter and applied it to the serviced blade for the lifetime extension. The microstructural analysis indicated that the appropriate solution temperature for the serviced blade is 1205 °C. Furthermore, the microstructure of the degraded blade was effectively recovered including the γ′ dissolution and reprecipitation with the cubic shape, tertiary γ′ reprecipitation in γ matrix, part of film-like M 23C 6 redissolution and dislocation networks were eliminated after rejuvenation heat treatment. In addition, the stress rupture lifetime and the tensile and yield strength were effectively improved by rejuvenation heat treatment.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Failure analysis of a gas turbine blade made of Inconel 738LC alloy10.1016/j.engfailanal.2004.10.002 ↗
2. Oxidation behavior of high Hf nickel-based superalloy in air at 900, 1000 and 1100°C10.1007/s12613-020-2204-z ↗
3. Study on the microstructural degradation and rejuvenation heat treatment of directionally solidified turbine blades10.1016/j.jallcom.2020.154474 ↗
4. Rejuvenation of degraded first stage gas turbine nozzle by heat treatment10.1016/j.jallcom.2010.03.070 ↗
5. D.S.Joydeep Pala, Eric, EFFECT OF REJUVENATION HEAT TREATMENT AND AGING ON THE MICROSTRUCTURAL EVOLUTION IN RENE N5 SINGLE CRYSTAL Ni BASE SUPERALLOY BLADES, Superalloys. (2016) 285–291. https://doi.org/10.1002/9781119075646.ch31.10.7449/Superalloys/2016/Superalloys_2016_285_291 ↗
6. Structure property correlation study of a service exposed first stage turbine blade in a power plant10.1016/j.msea.2005.12.030 ↗
7. Assessment of damage accumulation and property regeneration by hot isostatic pressing and heat treatment of laboratory-tested and service exposed IN738LC
8. Rejuvenation of service-exposed in 738 turbineblade
9. Microstructure, creep-properties, and rejuvenation of service-exposed alloy 713c turbine-blades10.1007/BF02647308 ↗
10. The effect of reheat treatments on recovering the creep behavior of a corrosion-resistant nickel-based superalloy10.1016/j.msea.2012.07.068 ↗
11. On the precipitation hardening of the directionally solidified GTD-111 Ni-base superalloy: microstructures and mechanical properties10.1016/j.msea.2017.01.005 ↗
12. On the rejuvenation of crept Ni-Base single crystal superalloys (SX) by hot isostatic pressing (HIP10.1016/j.msea.2019.04.078 ↗
13. Rejuvenation of single-crystal Ni-base superalloy turbine blades: unlimited service life10.1007/s11661-018-4745-6 ↗
14. Damage accumulation during creep deformation of a single crystal superalloy at 1150 degrees C10.1016/j.msea.2006.11.101 ↗
15. Pore annihilation in a single-crystal nickel-base superalloy during hot isostatic pressing: Experiment and modelling10.1016/j.msea.2013.08.034 ↗
16. The effect of reheat treatment on microstructure and stress rupture property of a directionally solidified nickel-based superalloy after long-term thermal exposure10.1016/j.msea.2017.03.116 ↗
17. Microstructural and mechanical investigations on the heat treatment rejuvenation of a long-term service-exposed GTD-111 Ni-based superalloy10.1016/j.msea.2022.144381 ↗
18. Microstructural changes by heat treatment for single crystal superalloy exposed at high temperature10.1016/j.jallcom.2013.01.129 ↗
19. Microstructural evolution and restoration of creep property for a damaged K403 alloy after rejuvenation heat treatments10.1007/s12598-020-01434-0 ↗
20. Rejuvenation of creep resistance of a Ni-base single-crystal superalloy by hot isostatic pressing10.1016/j.matdes.2017.08.059 ↗
21. Rejuvenation of IN738LC gas-turbine blades using hot isostatic pressing and a series of heat treatments10.1007/s12206-020-1018-2 ↗
22. Effect of rejuvenation heat treatment on the degraded turbine blades
23. Evaluation of service-induced damage and restoration of cast turbine blades, in Performance
24. Influence of the characteristic of recrystallization grain boundary on the formation of creep cracks in a directionally solidified Ni-base superalloy10.1016/j.msea.2011.10.124 ↗
25. Effects of rejuvenation heat treatment on microstructure and creep property of a Ni-based single crystal superalloy10.1016/j.jmst.2020.05.032 ↗
26. Effect of cyclic recovery heat treatment on surface recrystallization of a directionally solidified superalloy10.1016/S1002-0071(12)60088-4 ↗
27. Effect of climb on dislocation mechanisms and creep rates in γ′-strengthened Ni-base superalloy single crystals: a discrete dislocation dynamics study10.1016/j.actamat.2013.03.003 ↗
28. High-temperature creep-deformation behavior of the Ni-based superalloy M963, metallurgical and materials transactions10.1007/s11661-005-0111-6 ↗
29. The deformation mechanism of a γ′ precipitation-hardened nickel-base superalloy
30. Decorrelated movements of Shockley partial dislocations in the γ′ phase channels of nickel-based superalloys at intermediate temperature
31. A comparison of aging kinetics of new and rejuvenated conventionally cast GTD-111 gas turbine blades10.1007/s11665-007-9046-y ↗
32. Repair process technology development and experience of frame 7FA+E, stage 1 turbine buckets
33. Activation energy for growth in single size distribution and the dissolution features of γ′ precipitates in the superalloy IN738LC10.1007/s10853-007-2342-y ↗
34. Precipitate growth activation energy requirements in the duplex size γ′ distribution in the superalloy IN738LC10.1007/s10853-005-3154-6 ↗
35. Dislocation configurations and stress distribution along the transverse axis of turbine blade body10.1007/s11665-015-1774-9 ↗
36. Microstructure, chemistry and mechanical properties of Ni-based superalloy Rene N4 under irradiation at room temperature10.1016/j.actamat.2015.04.061 ↗
37. Study of microstructure degradation and rejuvenation evolution for F-class gas turbine blade10.1080/02670836.2019.1619305 ↗
38. Mechanism of primary MC carbide decomposition in Ni-base superalloys10.1007/s11661-004-0076-x ↗
39. Thermal effect on dislocation interactions in magnesium alloy10.1016/j.mtla.2022.101579 ↗
40. Rejuvenation of directionally solidified and single-crystal nickel-base superalloys10.1007/s11661-021-06150-7 ↗
41. Microstructural and chemical rejuvenation of a Ni-based superalloy
42. Evaluation of a serviced turbine blade made of GH4033 wrought superalloy10.1016/j.msea.2014.09.025 ↗
43. Effect of microstructures restoration on high temperature fatigue behavior of DZ125 superalloy10.1016/j.pnsc.2021.07.005 ↗
44. Effect of rejuvenation heat treatment on the creep property and microstructural evolution of a Ni-base superalloy10.3390/app10031187 ↗
45. Microstructural rejuvenation in a Ni-based single crystal superalloy