journal article·2023-06

Effect of impeller design on the properties of Li1.03Ni0.8Mn0.1Co0.1O2 cathode material synthesized via co-precipitation method

Baris Cem Alpay, Ozgul Keles

Publisher page

Abstract

Li 1.03Ni 0.8Mn 0.1Co 0.1O 2 (NMC811) is the most promising composition for lithium-ion battery cathodes due to its low cobalt content and high capacity. The most widely used method to synthesize NMC811 is co-precipitation. Even though the co-precipitation process requires great control over each parameter, research that sheds light on the effect of impeller types on the electrode material’s electrochemical performances is very limited. In this study, computational fluid dynamic (CFD) simulations for different types of impellers (pitched blade, hydrofoil blade, propeller, and Rushton turbine) were carried out using the Taguchi L4 array. The impellers were 3D printed, and the precursors (Ni 0.8Mn 0.1Co 0.1(OH) 2 ) were synthesized by utilizing those printed impellers. Simulations were used to gain insight into how impeller type affects the flow pattern, hence the final electrochemical performance of NMC811. The best cycle performance was obtained when a propeller-type impeller was used in coprecipitation. It delivered a discharge capacity of 174.58 mAh/g at a C/20 rate, with a coulombic efficiency of 96.02%. On the other hand, the Rushton turbine yielded the worst initial discharge capacity of 100.12 mAh/g at a C/20 rate. This significant difference proves that impeller geometry affecting the flow pattern strongly influences the electrochemical performance of the cathode.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Extraction and Separation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. A journey through layered cathode materials for lithium ion cells – From lithium cobalt oxide to lithium-rich transition metal oxides10.1016/j.jallcom.2021.159239 ↗
2. Challenges and prospects of nickel-rich layered oxide cathode material10.1016/j.jallcom.2022.164727 ↗
3. Effect of Li Excess on Electrochemical Performance of Ni-Rich LiNi 0.9 Co 0.05 Mn 0.05 O 2 Cathode Materials for Li-Ion Batteries10.1021/acsaem.1c03004 ↗
4. Synthesis and characterization of Li1.25Ni0.25Mn0.5O2: A high-capacity cathode material with improved thermal stability and rate capability for lithium-ion cells10.1016/j.jallcom.2022.168363 ↗
5. Enhancing the structural stability and capacity retention of Ni-rich LiNi0.7Co0.3O2 cathode materials via Ti doping for rechargeable Li-ion batteries: Experimental and computational approaches10.1016/j.jallcom.2021.161559 ↗
6. An in-depth understanding of chemomechanics in Ni-rich layered cathodes for lithium-ion batteries10.1016/j.jallcom.2022.168531 ↗
7. A nickel-rich oxide, Li(Ni0.90Co0.06Mn0.04)0.995Al0.005 O2, with a dual conductive coating10.1016/j.jallcom.2023.168870 ↗
8. Magnesium Substitution in Ni‐Rich NMC Layered Cathodes for High‐Energy Lithium Ion Batteries
9. The surface Al2O3 coating and bulk Zr doping drastically improve the voltage fade and cycling stability of Li(Ni0.8Mn0.1Co0.1)O2 cathode materials10.1016/j.jallcom.2023.168778 ↗
10. Optimized Ni-rich LiNi0.83Co0.06Mn0.06Al0.05O2 cathode material with a Li1.3Al0.3Ti1.7(PO4)3 fast ion conductor coating for Lithium-ion batteries10.1016/j.jallcom.2022.166277 ↗
11. Structure, modification, and commercialization of high nickel ternary material (LiNi0.8Co0.1Mn0.1O2 and LiNi0.8Co0.15Al0.05O2) for lithium ion batteries10.1007/s10008-020-04818-5 ↗
12. Understanding the Effects of Tetrahedral Site Occupancy by the Zn Dopant in Li-NMCs toward High-Voltage Compositional–Structural–Mechanical Stability via Operando and 3D Atom Probe Tomography Studies10.1021/acsami.2c15054 ↗
13. Unraveling the Origin of Instability in Ni-Rich LiNi 1–2 x Co x Mn x O 2 (NCM) Cathode Materials10.1021/acs.jpcc.6b00369 ↗
14. Progress in preparation and modification of LiNi 0.6 Mn 0.2 Co 0.2 O 2 cathode material for high energy density Li-ion batteries10.1155/2018/6930386 ↗
15. Recent progress in synthesis and surface modification of nickel-rich layered oxide cathode materials for lithium-ion batteries10.1088/2631-7990/ac92ef ↗
16. Review on the synthesis of LiNixMnyCo1-x-yO2 (NMC) cathodes for lithium-ion batteries
17. Precursor Morphology Control and Electrochemical Properties of LiNi 0.35 Mn 0.30 Co 0.35 O 2 as a Li-Ion Battery Positive Electrode Material10.1021/acsaem.2c00698 ↗
18. Kinetic Control of Long‐Range Cationic Ordering in the Synthesis of Layered Ni‐Rich Oxides
19. Single crystal Ni-rich NMC cathode materials for lithium-ion batteries with ultra-high volumetric energy density10.1039/D2YA00211F ↗
20. Effect of Synthesis Method on the Electrochemical Performance of LiNixMnCo1-x-yO2 (NMC) Cathode for Li-Ion Batteries: A Review
21. Machine learning assisted synthesis of lithium-ion batteries cathode materials10.1016/j.nanoen.2022.107214 ↗
22. Ultrasonic-assisted co-precipitation to synthesize lithium-rich cathode Li1.3Ni0.21Mn0.64O2+ materials for lithium-ion batteries10.1016/j.jpowsour.2014.08.063 ↗
23. Enhanced electrochemical performance of LiNi0.6Co0.2Mn0.2O2 cathode materials by ultrasonic-assisted co-precipitation method10.1016/j.jallcom.2015.04.173 ↗
24. Effect of impeller type on preparing spherical and dense Ni1−−Co Mn (OH)2 precursor via continuous co-precipitation in pilot scale: A case of Ni0·6Co0·2Mn0·2(OH)210.1016/j.electacta.2019.06.008 ↗
25. Influence of mixing characteristics on the quality and size of precipitated calcium oxalate in a pilot scale reactor10.1205/026387697523534 ↗
26. Mixing in a tank stirred by a Rushton turbine at a low clearance10.1016/j.cep.2007.01.034 ↗
27. CFD study on double- to single-loop flow pattern transition and its influence on macro mixing efficiency in fully baffled tank stirred by a Rushton turbine10.1016/j.cjche.2018.10.002 ↗
28. Foukrach · Eff. Agitator’s Types Hydrodyn. Flow. Agit. Tank. · 2020 · 18
29. Preparation of spherical LiNi0.80Co0.15Mn0.05O2 lithium-ion cathode material by continuous co-precipitation10.1016/j.jpowsour.2009.08.101 ↗
30. Controllable synthesis of spherical precursor Ni0.8Co0.1Mn0.1(OH)2 for nickel-rich cathode material in Li-ion batteries10.1016/j.ceramint.2019.12.204 ↗
31. Synthesis and electrochemical properties of Li[Ni0.8Co0.1Mn0.1]O2 and Li[Ni0.8Co0.2]O2 via co-precipitation10.1016/j.jpowsour.2005.11.083 ↗
32. Properties of LiNi0.8Co0.1Mn0.1O2 as a high energy cathode material for lithium-ion batteries, Korean J
33. Hierarchically assembled LiNi0.8Co0.1Mn0.1O2 secondary particles with high exposure of {010} plane synthesized via co-precipitation method10.1016/j.electacta.2019.135057 ↗
34. The effect of mixing on silver particle morphology in flow synthesis10.1016/j.ces.2018.07.043 ↗
35. Growth mechanisms for spherical mixed hydroxide agglomerates prepared by co-precipitation method: A case of Ni1/3Co1/3Mn1/3(OH)210.1016/j.jallcom.2014.08.152 ↗
36. An Efficient Synthetic Method to Prepare High-Performance Ni-rich LiNi 0.8 Co 0.1 Mn 0.1 O 2 for Lithium-Ion Batteries10.1021/acsaem.9b01414 ↗
37. Improvement of electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathode material by graphene nanosheets modification10.1016/j.electacta.2014.10.093 ↗
38. Well-ordered layered LiNi0.8Co0.1Mn0.1O2 submicron sphere with fast electrochemical kinetics for cathodic lithium storage10.1016/j.jechem.2019.12.009 ↗
39. Effects of inorganic salts on the morphological, structural, and electrochemical properties of prepared nickel-rich Li[Ni0.6Co0.2Mn0.2]O210.1016/j.jpowsour.2014.06.057 ↗
40. Suppressing structural degradation of Ni-rich cathode materials towards improved cycling stability enabled by a Li2MnO3 coating10.1039/D0TA00924E ↗
41. Effect of micron sized particle on the electrochemical properties of nickel-rich LiNi0.8Co0.1Mn0.1O2 cathode materials10.1016/j.ceramint.2019.10.195 ↗
42. A short process for the efficient utilization of transition-metal chlorides in lithium-ion batteries: A case of Ni0.8Co0.1Mn0.1O1.1 and LiNi0.8Co0.1Mn0.1O210.1016/j.jpowsour.2016.12.095 ↗
43. Long-term cyclability of NCM-811 at high voltages in lithium-ion batteries: an in-depth diagnostic study10.1021/acs.chemmater.0c02398 ↗
44. Stabilizing Capacity Retention in NMC811/Graphite Full Cells via TMSPi Electrolyte Additives10.1021/acsaem.9b00727 ↗
45. Hydrophobic Ni-Rich Layered Oxides as Cathode Materials for Lithium-Ion Batteries10.1021/acsaem.9b00786 ↗
46. Study of full concentration-gradient Li(Ni0.8Co0.1Mn0.1)O2 cathode material for lithium ion batteries
47. Crack-free single-crystalline Ni-rich layered NCM cathode enable superior cycling performance of lithium-ion batteries10.1016/j.nanoen.2020.104450 ↗
48. Synthesis of Ni0.8Co0.1Mn0.1(OH)2 precursor and electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathode material for lithium batteries10.1016/S1003-6326(15)63838-9 ↗
49. Surface-modified concentration-gradient Ni-rich layered oxide cathodes for high-energy lithium-ion batteries10.1016/j.jpowsour.2015.02.078 ↗