journal article·2023-06Open access

Microstructural characterisation and mechanical evaluation of Ti-15Mo manufactured by laser metal deposition

Edohamen Awannegbe, Huijun Li, Tingting Song, Frank Niessen, Ma Qian, Azdiar A. Gazder, Mitchel J.B. Nancarrow, Elena Pereloma

Abstract

A bidirectional powder deposition strategy was employed to additively manufacture Ti-15Mo wt% using laser metal deposition. Phase identification, elemental analysis and microstructural characterisation were conducted after fabrication and uniaxial tensile testing using X-ray diffraction and scanning electron microscopy along the different processing directions. In addition, electron backscattering diffraction and transmission electron microscopy were used to analyse deformation mechanisms. It was found that three distinct zones, namely the fusion, remelted and heat affected zones, evolved in all 25 deposited layers which predominantly comprised coarse columnar grains. Mo segregation was pronounced in the as-built microstructure. Deformation accommodation in β matrix was by a combination of slip, {332}<113> and {112}<111> twinning, and α′′ martensite and ωD formation contrarily to the expected twinning.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Electron beam welding–techniques and trends–review10.1016/j.vacuum.2016.05.004 ↗
2. Laser and electron‐beam powder‐bed additive manufacturing of metallic implants: a review on processes, materials and designs10.1002/jor.23075 ↗
3. J. Cho, Characterization of the α′-Martensite Phase and Its Decomposition in Ti-6Al-4V Additively Manufactured by Selective Laser Melting, PhD thesis, RMIT University, (2018) 1–197.
4. Laser metal deposition as repair technology for stainless steel and titanium alloys10.1016/j.phpro.2012.10.051 ↗
5. Laser additive manufacture of titanium alloys
6. Scanning speed and powder flow rate influence on the properties of laser metal deposition of titanium alloye10.1007/s00170-016-9954-9 ↗
7. Simulation-informed laser metal powder deposition of Ti-6Al-4V with ultrafine α-β lamellar structures for desired tensile properties
8. Fabrication of Ti-6Al-4V scaffolds by direct metal deposition10.1007/s11661-008-9634-y ↗
9. Laser metal deposition of Ti6Al4V—a brief review10.3390/app10030764 ↗
10. Laser deposition of compositionally graded titanium–vanadium and titanium–molybdenum alloys10.1016/S0921-5093(02)00909-7 ↗
11. Laser deposition and deformation behavior of Ti–Nb–Zr–Ta alloys for orthopedic implants10.1016/j.jmbbm.2012.08.014 ↗
12. Direct Energy Deposition - Laser Additive Manufacturing of Titanium-Molybdenum alloy: parametric studies, microstructure and mechanical properties10.1016/j.jallcom.2019.02.121 ↗
13. Strength and ductility optimization of laser additive manufactured metastable β titanium alloy by tuning α phase by post heat treatment10.1016/j.msea.2021.142265 ↗
14. The ageing response of direct laser deposited metastable β-Ti alloy, Ti–5Al–5Mo–5V–3Cr
15. Humbeeck, Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting10.1016/j.actamat.2014.01.018 ↗
16. Microstructure and mechanical properties of the near-beta titanium alloy Ti-5553 processed by selective laser melting10.1016/j.matdes.2016.04.103 ↗
17. A study of the microstructural evolution during selective laser melting of Ti–6Al–4V10.1016/j.actamat.2010.02.004 ↗
18. Discovery of a 〈210〉-fiber texture in medical-grade metastable beta titanium wire10.1016/j.actamat.2014.12.035 ↗
19. Ti–Mo alloys employed as biomaterials: effects of composition and aging heat treatment on microstructure and mechanical behavior10.1016/j.jmbbm.2013.11.021 ↗
20. Morphology and crystallography of alpha precipitates in beta Ti-Mo binary alloys10.2320/matertrans1989.39.31 ↗
21. Stress-induced products in meta-stable beta Ti–Mo and Ti–V10.2320/jinstmet1952.42.8_814 ↗
22. Effect of plastic deformation modes on tensile properties of beta titanium alloys10.2320/matertrans1960.27.496 ↗
23. On the design of new β-metastable titanium alloys with improved work hardening rate thanks to simultaneous TRIP and TWIP effects10.1016/j.scriptamat.2012.01.049 ↗
24. Investigation of early stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects10.1016/j.actamat.2013.07.019 ↗
25. Mechanism of twinning-induced plasticity in β-type Ti–15Mo alloy10.1016/j.scriptamat.2013.05.027 ↗
26. On the transformation pathways in TRIP / TWIP Ti – 12Mo alloy10.1016/j.msea.2021.141672 ↗
27. In-situ observations of a hierarchical twinning–detwinning process in stress-induced α″-martensite of Ti-12Mo alloy10.1080/21663831.2021.2013967 ↗
28. Significant enhancement in yield strength for a metastable beta titanium alloy by selective laser melting10.1016/j.msea.2021.141291 ↗
29. Multi-scale microstructural development and mechanical properties of a selectively laser melted beta titanium alloy
30. Transformation-induced plasticity and high strength in beta titanium alloy manufactured by selective laser melting10.1016/j.mtla.2019.100299 ↗
31. Suppression and reactivation of transformation and twinning induced plasticity in laser powder bed fusion additively manufactured Ti-10V–2Fe-3Al
32. Study of superior strength in Ti15Mo alloy manufactured using selective laser melting10.1016/j.jallcom.2021.161186 ↗
33. crystalAligner: a computer program to align crystal directions in a scanning electron microscope by global optimization10.1107/S1600576719017345 ↗
34. Mo segregation and distribution in Ti–Mo alloy investigated using nanoindentation10.1016/j.msea.2018.01.098 ↗
35. S.T. Sasano H, Crystal structure of martensites in Ti-Mo-Al alloys, in: O.I. Hirozo Kimura (Ed.) Titanium '80, science and technology: proceedings of the Fourth International Conference on Titanium, Metallurgical Society of AIME, 1980, Kyoto, Japan, 1980, pp. 717–724.
36. In-situ observation of nucleation, growth and interaction of deformation-induced α″ martensite in metastable Ti–10V–2Fe–3Al10.1016/j.msea.2020.140237 ↗
37. Formation and reversion of stress induced martensite in Ti-10V–2Fe-3Al10.1016/0001-6160(82)90137-7 ↗
38. Controlling the microstructure and mechanical properties of a metastable β titanium alloy by selective laser melting10.1016/j.msea.2018.04.087 ↗
39. Further observations on dendritic growth in metals10.1139/p52-047 ↗
40. Factors determining crystal orientation of dendritic growth during solidification10.1016/S0254-0584(97)80044-2 ↗
41. Microstructure and micro-texture evolution of additively manufactured β-Ti alloys
42. Selective laser melting of biomedical Ti15Mo alloy: a proper combination of strength and ductility under the effects of multiple mechanisms10.1016/j.jallcom.2021.159686 ↗
43. Effect of oxygen addition on microstructures and mechanical properties of Ti-7.5Mo alloy10.1016/j.jallcom.2017.12.072 ↗
44. P. Castany, Y. Yang, E. Bertrand, T. Gloriant, Reversion of a Parent {130}{〈310〉α′′ Martensitic Twinning System at the Origin of {332}{〈113〉β Twins Observed in Metastable β Titanium Alloys, Physical Review Letters, 117 (2016) 245501.10.1103/PhysRevLett.117.245501 ↗
45. On the mechanism of {332} twinning in metastable β titanium alloys10.1016/j.actamat.2016.03.040 ↗
46. Deformation behavior and texture development in beta Ti-V alloys10.1007/BF02642942 ↗
47. Stress-induced phase transformation and room temperature aging in Ti-Nb-Fe alloys10.1016/j.msea.2016.10.060 ↗