journal article·2023-04

Fabrication of binder-free nickel-manganese phosphate battery-type electrode by microwave-assisted hydrothermal technique

Ong Gerard, Arshid Numan, Mohammad Khalid, S. Ramesh, K. Ramesh

Publisher page

Abstract

A high-performing electrochemical binder-free nickel-manganese phosphate (NMP) battery-type electrode was successfully fabricated by the microwave-assisted hydrothermal method. The NMP was directly deposited on the nickel foam surface without a binder. Design of Experiment (DoE) was used to optimize the synthesis parameters for the NMP electrode that achieved the highest specific capacity at 90 degrees C, synthesis duration of 5 min, and Ni:Mn precursor ratio of 1:3. A percentage error of less than 10 % between the predicted and experimental specific capacity values was obtained, declaring that the obtained specific capacity of the optimized NMP (Ni-Mn3-P) binder-free electrode was in the 90 % confidence interval. Field emission scanning electron microscope (FESEM), Energy-dispersive X-ray spectroscopy (EDX), X-Ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) were utilized to determine the morphology, elemental composition, chemical state, chemical bonding, and crystallinity of the Ni-Mn3-P electrode, respectively. Based on the galvanostatic charge-discharge (GCD) analysis, the Ni-Mn3-P binder-free electrode had a higher specific capacity of 1500.0 C/g at 3 A/g current density compared to single metal phosphate electrodes (Ni-P and Mn-P). Moreover, the Ni-Mn3-P electrode also exhibited the highest capacity retention and lowest charge transfer resistance. These results suggest that the binder-free Ni-Mn3-P electrode is a potential candidate for energy storage devices. (c) 2023 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Advanced battery technologies research · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (88)

Show source-provided references
1. Rapid microwave-assisted synthesis of MnCo2O4 nanoflakes as a cathode for battery-supercapacitor hybrid10.1016/j.est.2021.103566 ↗
2. Battery technologies for grid-level large-scale electrical energy storage10.1007/s12209-019-00231-w ↗
3. Enhancing rate capability of amorphous nickel phosphate supercapattery electrode via composition with crystalline silver phosphate10.1016/j.electacta.2018.03.136 ↗
4. Fabrication of all-solid-state textile supercapacitors based on industrial-grade multi-walled carbon nanotubes for enhanced energy storage10.1007/s10853-020-04709-0 ↗
5. Optimizing electrochemical performance of sonochemically and hydrothermally synthesized cobalt phosphate for supercapattery devices10.1016/j.ijhydene.2021.02.077 ↗
6. Nickel-based bimetallic battery-type materials for asymmetric supercapacitors
7. Synthesis of ternary NiCo-MnO2 nanocomposite and its application as a novel high energy supercapattery device10.1016/j.cej.2017.10.169 ↗
8. Recent advancements in supercapacitors based on different electrode materials: classifications, synthesis methods and comparative performance10.1016/j.est.2021.103871 ↗
9. S. Lele, A. Arora, Supercapacitors: A Comparative Analysis, 2018. https://www.exponent.com/knowledge/alerts/2018/02/supercapacitors/?pageSize=NaN&pageNum=0&loadAllByPageSize=true.
10. Optimisation of NiO electrodeposition on 3D graphene electrode for electrochemical energy storage using response surface methodology10.1016/j.jelechem.2021.114992 ↗
11. High performance supercapattery incorporating ternary nanocomposite of multiwalled carbon nanotubes decorated with Co3O4 nanograins and silver nanoparticles as electrode material10.1016/j.electacta.2018.05.040 ↗
12. Effect of polyaniline on the performance of zinc phosphate as a battery-grade material for supercapattery10.1016/j.est.2021.103329 ↗
13. Comprehensive insight into the mechanism, material selection and performance evaluation of supercapatteries10.1007/s40820-020-0413-7 ↗
14. Redox electrode materials for supercapatteries10.1016/j.jpowsour.2016.04.095 ↗
15. Supercapatteries as high-performance electrochemical energy storage devices10.1007/s41918-020-00063-6 ↗
16. Supercapattery: Merging of battery-supercapacitor electrodes for hybrid energy storage devices10.1016/j.est.2021.103823 ↗
17. Room temperature boronized and phosphated cobalt-nickel metal-organic framework as the electrode material for supercapacitors10.1016/j.est.2022.104372 ↗
18. High-performance bimetallic Ni-Mn phosphate hybridized with 3-D graphene foam for novel hybrid supercapacitors10.1016/j.est.2020.101584 ↗
19. Facile synthesis of cost-effective Ni3(PO4)2·8H2O microstructures as a supercapattery electrode material10.1016/j.mtener.2017.12.004 ↗
20. Binary composites of nickel-manganese phosphates for supercapattery devices10.1016/j.est.2020.102020 ↗
21. Nickel-manganese phosphate: an efficient battery-grade electrode for supercapattery devices10.1016/j.ceramint.2020.12.247 ↗
22. Microwave synthesis of sodium nickel-cobalt phosphates as high-performance electrode materials for supercapacitors10.1016/j.jallcom.2019.03.382 ↗
23. Controllable fabrication and tuned electrochemical performance of potassium Co-Ni phosphate microplates as electrodes in supercapacitors10.1021/acsami.7b14552 ↗
24. Amorphous mesoporous nickel phosphate/reduced graphene oxide with superior performance for electrochemical capacitors10.1039/C8DT02304B ↗
25. Interlayer material technology of manganese phosphate toward and beyond electrochemical pseudocapacitance over energy storage application10.1016/j.jmst.2020.07.033 ↗
26. An enhanced performance of hybrid supercapacitor based on polyaniline-manganese phosphate binary composite10.1007/s10008-017-3624-1 ↗
27. Binder-free electrodes and their application for Li-Ion batteries10.1186/s11671-020-03325-w ↗
28. A review on the recent advances in binder-free electrodes for electrochemical energy storage application10.1016/j.est.2022.104283 ↗
29. Rapid microwave assisted hydrothermal synthesis of porous α-Fe2O3 nanostructures as stable and high capacity negative electrode for lithium and sodium ion batteries10.1039/C5RA03238E ↗
30. Recent advancements in microwave-assisted synthesis of NiO nanostructures and their supercapacitor properties: a comprehensive review10.2174/2405461503666180305161202 ↗
31. Conventional and microwave hydrothermal synthesis and application of functional10.3390/ma12213640 ↗
32. Microwave-assisted synthesis of metal oxide/hydroxide composite electrodes for high power supercapacitors - a review10.1016/j.jpowsour.2014.03.144 ↗
33. Short time and low temperature reaction between metal oxides through microwave-assisted hydrothermal method10.1155/2016/3745459 ↗
34. Designs of experiments for beginners—a quick start guide for application to electrode formulation10.3390/batteries5040072 ↗
35. NiFe hydroxide nanosheet synthesized by in-situ chelation for highly efficient oxygen evolution reaction10.1016/j.matchemphys.2020.123918 ↗
36. Fabrication of binary metal phosphate-based binder-free electrode for new generation energy storage device10.1016/j.surfcoat.2021.127924 ↗
37. Application of central composite design to the partition of perrhenate anion in aqueous two phase system Na2MoO4+PEG 4000+H2O10.1016/j.molliq.2019.01.123 ↗
38. Temperature effect on the binder-free nickel copper oxide nanowires with superior supercapacitor performance10.1039/C4NR04192E ↗
39. Investigation of microwave-assisted synthesis of palladium nanoparticles supported on Fe3O4 as efficient recyclable magnetic catalysts for Suzuki-Miyaura cross-coupling10.1002/cjce.23402 ↗
40. Waste-biomass tar functionalized carbon spheres with N/P Co-doping and hierarchical pores as sustainable low-cost energy storage materials10.1016/j.renene.2022.01.109 ↗
41. Nanostructured ternary metal chalcogenide-based binder-free electrodes for high energy density asymmetric supercapacitors10.1016/j.nanoen.2018.12.031 ↗
42. One-step microwave-assisted solvothermal nano-manufacturing of Ni2P nanosphere as high-performance supercapacitors10.1007/s11581-020-03873-2 ↗
43. In situ microwave-assisted solvothermal synthesis via morphological transformation of ZnCo2O4 3D nanoflowers and nanopetals to 1D nanowires for hybrid supercapacitors10.1039/D0RA09507A ↗
44. Controlled growth of MoS2 nanopetals and their hydrogen evolution performance10.1039/C5RA24908B ↗
45. Novel cuboid-like cobalt nickel phosphate/manganese dioxide/multi-walled carbon nanotubes composites as binder-free electrodes for high-performance supercapacitors10.1016/j.inoche.2020.107822 ↗
46. Effect of soft template on NiMn-LDH grown on nickel foam for battery-type electrode materials10.1007/s11581-021-03930-4 ↗
47. Facile electrochemical phosphatization of Mn3O4 nanosheet arrays for supercapacitor with enhanced performance10.1007/s10853-018-2842-y ↗
48. Binary nanocomposite based on Co3O4 nanocubes and multiwalled carbon nanotubes as an ultrasensitive platform for amperometric determination of dopamine10.1007/s00604-017-2269-1 ↗
49. Hierarchical NiFe layered double hydroxide hollow microspheres with highly-efficient behavior toward oxygen evolution reaction10.1021/acsami.6b12100 ↗
50. Robust ruddlesden-popper phase Sr3Fe1.3Mo0.5Ni0.2O7-δ decorated with in-situ exsolved Ni nanoparticles as anefficient anode for hydrocarbon fueled solid oxide fuel cells
51. Delayed expansion behavior and mechanical properties of water-swelling rubber/OMMT composites
52. Ir-Ni Bimetallic OER catalysts prepared by controlled Ni electrodeposition on irpoly and Ir(111)10.3390/surfaces1010013 ↗
53. A 3D petal-like Ni3S2/CoNi 2 S 4 hybrid grown on Ni foam as a binder-free electrode for energy storage10.1039/C8SE00130H ↗
54. Vertically aligned porous Nickel(II) hydroxide nanosheets supported on carbon paper with long-term oxygen evolution performance10.1002/asia.201601590 ↗
55. Stable NiO–CeO2 nanoparticles with improved carbon resistance for methane dry reforming10.1016/j.jre.2020.11.020 ↗
56. Evaluation of MnOx,Mn2O3, and Mn3O4 Electrodeposited Films for the Oxygen Evolution Reaction of Water10.1021/jp500939d ↗
57. Mesostructured amorphous manganese oxides: facile synthesis and highly durable elimination of low-concentration NO at room temperature in air10.1039/C5CC00269A ↗
58. CeαMn1-αO2 catalysts supported over γ-Al2O3 prepared by modified redox-coprecipitation methods For n-Hexane combustion
59. A facile electrochemical approach for the deposition of iron-manganese phosphate composite coatings on aluminium
60. Regulating MoS2 edge site for photocatalytic nitrogen fixation: A theoretical and experimental study10.1016/j.cej.2022.136211 ↗
61. Carbon monoxide adsorption on manganese oxide/cobalt: an ambient pressure X-ray photoelectron spectroscopy study10.1021/acs.jpcc.9b08942 ↗
62. High-performance Li-O2 batteries with trilayered Pd/MnOx/Pd nanomembranes10.1002/advs.201500113 ↗
63. Effects of plasma pretreatment on the process of self-forming Cu-Mn alloy barriers for Cu interconnects10.1063/1.4993051 ↗
64. Manganese and graphene included titanium dioxide composite nanowires: Fabrication, characterization and enhanced photocatalytic activities10.3390/nano10030456 ↗
65. Acidic media regulated hierarchical cobalt compounds with phosphorous doping as water splitting electrocatalysts10.1002/aenm.202100358 ↗
66. Dual-functional starfish-like P-doped Co-Ni-S nanosheets supported on nickel foams with enhanced electrochemical performance and excellent stability for overall water splitting10.1021/acsami.7b18403 ↗
67. Corrosion control methods in supercritical water oxidation processes
68. XPS analysis of AuGeNi/Cleaved GaAs(110) interface10.1155/2016/7574526 ↗
69. XPS investigations of MOCVD tin oxide thin layers on Si nanowires array10.1016/j.rinp.2018.09.046 ↗
70. Reactivity of mesoporous carbon against water - an in-situ XPS study10.1016/j.carbon.2014.05.019 ↗
71. Ambient pressure x-ray photoelectron spectroscopy study of water formation and adsorption under two-dimensional silica and aluminosilicate layers on Pd(111)10.1063/1.5142621 ↗
72. Probing lithium-ion battery electrolytes with laboratory near-ambient pressure xps10.3390/cryst10111056 ↗
73. Ambient air, by near-ambient pressure XPS
74. Study of the synergistic effect of nanoporous nickel phosphates on novel intumescent flame retardant polypropylene composites10.1155/2015/289298 ↗
75. Power of infrared and Raman spectroscopies to characterize metal-organic frameworks and investigate their interaction with guest molecules10.1021/acs.chemrev.0c00487 ↗
76. Comparison of cytotoxicity of black phosphorus nanosheets in different types of fibroblasts10.1186/s40824-019-0174-x ↗
77. Microsheets like nickel cobalt phosphate thin films as cathode for hybrid asymmetric solid-state supercapacitor: influence of nickel and cobalt ratio variation10.1016/j.cej.2021.132184 ↗
78. Single-pot hydrothermal synthesis of manganese phosphate microrods as a cathode material for highly stable flexible solid-state symmetric supercapacitors10.1016/j.synthmet.2020.116446 ↗
79. Synthesis of mesoporous NiCo2O4-rGO by a solvothermal method for charge storage applications10.1039/C5RA11239G ↗
80. Fabrication of a high-performance hybrid supercapacitor based on hydrothermally synthesized highly stable cobalt manganese phosphate thin films10.1021/acs.langmuir.1c00243 ↗
81. Facile synthesis of a binary composite from watermelon rind using response surface methodology for supercapacitor electrode material10.1016/j.est.2022.104147 ↗
82. Facile sonochemical synthesis of strontium phosphate based materials for potential application in supercapattery devices10.1016/j.ijhydene.2020.08.177 ↗
83. Direct growth of nickel-cobalt oxide nanosheet arrays on carbon nanotubes integrated with binder-free hydrothermal carbons for fabrication of high performance asymmetric supercapacitors10.1016/j.compositesb.2019.05.027 ↗
84. Asymmetric supercapacitors based on porous MnMoS4 nanosheets-anchored carbon nanofiber and N, S-doped carbon nanofiber electrodes10.1016/j.jallcom.2022.164271 ↗
85. Electrochemical sensing of serotonin by silver decorated polypyrrole nanoribbon based electrode synthesized by sodium cholate as soft template
86. Hydrothermally synthesized microrods and microballs of NiCo2O4 for supercapacitor application10.1016/j.ceramint.2022.04.190 ↗
87. Controllable synthesis of gossamer-like Nb2O5-RGO nanocomposite and its application to supercapacitor10.1007/s11051-020-4779-8 ↗
88. Designing vertically aligned porous NiCo2O4@MnMoO4 Core@Shell nanostructures for high-performance asymmetric supercapacitors10.1016/j.jcis.2020.07.062 ↗