Elevated corrosion resistance and improved magnetic properties of sintered Nd-Fe-B magnets via the infiltration of DyCr film
Source abstract
Abstract
The low coercivity at high temperature and poor corrosion resistance limit the application field of Nd-Fe-B magnets. In this work, a DyCr film was prepared on the surface of Nd-Fe-B magnet through magnetron sputtering, and then subjected to grain boundary diffusion (GBD) to improve magnetic properties and enhance corrosion resistance. The results show that the residual Cr-rich film exists on the surface of NdFeB magnets, acting as a protective coating to enhance the corrosion resistance, which is evidenced by the weight loss experiment and scanning electron microscopy (SEM) image. Moreover, Cr element in the grain boundary phase increase the electrochemical potential from − 0.985 to − 0.733 V, which is also beneficial in improving corrosion resistance. Transmission electron microscope (TEM) analysis confirmed that the crystal structure of intergranular phase remained unchanged after diffusion, i.e. BCC-RE 2O 3 (RE=Rare Earth) phase. The coercivity was improved significantly, obtaining an increment of 19.4% comparing to that of initial magnet, which is attributed to the formed Dy-rich shell with high magnetocrystalline anisotropy field and the improved distribution of grain boundary phase. This suggests that it is feasible to fabricate high coercivity magnets and strong corrosion resistance only through grain boundary diffusion, which is expected to further shorten the processing flow of Nd-Fe-B magnets.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties of Alloys · Magnetic Properties and Applications · Magnetic properties of thin films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Current status and recent topics of rare-earth permanent magnets10.1088/0022-3727/44/6/064001 ↗
2. Magnetic materials and devices for the 21st century: stronger, lighter, and more energy efficient10.1002/adma.201002180 ↗
3. Recent development of Nd-Fe-B sintered magnets and their applications10.1016/j.jmmm.2006.01.171 ↗
4. Effect of Tb on the intrinsic coercivity and impact toughness of sintered Nd-Dy-Fe-B magnets10.1016/j.jmmm.2008.01.027 ↗
5. Reactivity of Dy2O3 and Tb4O7 with Nd15Fe77B8 powder and the coercivity of the sintered magnets10.1063/1.96503 ↗
6. Microstructure and coercivity of grain boundary diffusion processed Dy-free and Dy-containing NdFeB sintered magnets10.1016/j.actamat.2019.04.032 ↗
7. Coercivity enhancement by the grain boundary diffusion process to Nd-Fe-B sintered magnets10.1109/TMAG.2006.879906 ↗
8. Investigation on the grain boundary diffusion of Dy2O3 film prepared by electrophoretic deposition for sintered Nd-Fe-B magnets10.1016/j.jallcom.2020.157606 ↗
9. An insight into the improved microstructure and elevated comprehensive properties of sintered Nd-Fe-B magnets via the infiltration of DyCu alloy10.1016/j.jmrt.2022.08.088 ↗
10. Comparison on the coercivity enhancement of the sintered NdFeB magnets by grain boundary diffusion with Tb70Cu30 powders prepared by different milling methods10.1063/9.0000073 ↗
11. Merits of Pr80Ga20 grain boundary diffusion process towards high coercivity-remanence synergy of Nd-La-Ce-Fe-B sintered magnet10.1016/j.actamat.2022.117873 ↗
12. Improvement of coercivity and its thermal stability of hot-deformed Nd-Fe-B magnets processed by Tb70Cu30 doping and subsequent Nd85Cu15 diffusion10.1016/j.actamat.2021.117296 ↗
13. Grain boundary diffusion treatment of sintered NdFeB magnets by low cost La-Al-Cu alloys with various Al/Cu ratios10.1016/j.jmmm.2019.165498 ↗
14. Towards the diffusion source cost reduction for NdFeB grain boundary diffusion process10.1016/j.jmst.2019.08.009 ↗
15. Grain boundary modification and properties enhancement of sintered Nd-Fe-B magnets by ZnO solid diffusion10.1016/j.apsusc.2021.150545 ↗
16. Annealed Al-Cr coating: a hard anti-corrosion coating with grain boundary modification effect for Nd-Fe-B magnets10.1016/j.jallcom.2021.159229 ↗
17. Microstructure and improved properties of sintered Nd-Fe-B magnets by grain boundary diffusion of non-rare earth10.1016/j.jmmm.2018.12.048 ↗
18. Properties improvement and structural optimization of sintered NdFeB magnets by non-rare earth compound grain boundary diffusion10.1016/j.matdes.2015.07.067 ↗
19. Corrosion behaviour of sintered NdFeB coated with Al/Al2O3 multilayers by magnetron sputtering10.1016/j.apsusc.2010.11.162 ↗
20. Effects of Al/Cu co-doping on crystal structure and chemical composition of Nd-rich phases in Nd-Fe-B sintered magnet10.1016/j.actamat.2017.05.046 ↗
21. Improvement of corrosion resistance and magnetic properties of Nd-Fe-B sintered magnets by Al85Cu15 intergranular addition10.1016/j.jallcom.2010.04.021 ↗
22. Magnetic properties, corrosion resistance, and microstructure of Nd-Fe-B sintered magnets with Tb6Fe13Cu addition10.1016/j.jmrt.2021.10.051 ↗
23. Improvement of coercivity and corrosion resistance of Nd-Fe-B sintered magnets with Cu nano-particles doping10.1016/S1005-0302(12)60152-2 ↗
24. Improvement of corrosion resistance of Cu and Nb co-added Nd-Fe-B sintered magnets10.1016/j.matchemphys.2014.06.046 ↗
25. Magnetic properties and corrosion resistance of Nd-Fe-B magnets with Nd64Co36 intergranular addition10.1016/j.jallcom.2014.07.085 ↗
26. Phosphate conversion of electroplated Ni coatings on NdFeB magnets improving the anticorrosion property10.1016/j.jallcom.2022.166206 ↗
27. Rare earth passivation and corrosion resistance of zinc coated NdFeB magnets10.1016/j.jre.2020.11.012 ↗
28. Kinetics of high temperature oxidation of end-of-life Ni/Cu/Ni coated NdFeB rare earth permanent magnets10.1016/j.corsci.2021.109560 ↗
29. Demagnetizing factors for rectangular ferromagnetic prisms10.1063/1.367113 ↗
30. Coercivity and thermal stability enhancement of NdFeB magnet by grain boundary diffusion Tb80Al20 alloys10.1016/j.intermet.2021.107335 ↗
31. The properties of chromium oxide coatings on NdFeB magnets by magnetron sputtering with ion beam assisted deposition10.1016/j.vacuum.2016.06.004 ↗
32. Sintered NdFeB magnets with Tb-Dy double-layer core/shell structure were fabricated by double alloy method and grain boundary diffusion10.1016/j.jallcom.2020.158191 ↗
33. Microstructure, magnetic properties and diffusion mechanism of DyMg co-deposited sintered Nd-Fe-B magnets10.1016/j.jallcom.2019.153002 ↗
34. Understanding the role of element grain boundary diffusion mechanism in Nd-Fe-B magnets10.1002/adfm.202109529 ↗