Synthesis and properties of Ti-Al coating by high-frequency induction heated combustion
Source abstract
Abstract
Ti-Al coatings with porosities of 1.11%− 2.28% were synthesized in situ via high-frequency induction heated combustion synthesis (HFIHCS) method within several minutes. The adiabatic temperatures at different preheating temperatures were calculated thermodynamically. The microstructure, phase composition, cross-sectional microhardness, oxidation, and corrosion resistance to molten aluminum alloy of the as-received coatings were investigated. The results showed that the Ti-Al reaction could be self-sustained when the preheating temperature reached 605 K. The combustion reaction and pore-forming mechanisms of the as-received Ti-Al coating conformed to liquid-solid reaction and thermal explosion, respectively. The coating microstructure followed a core-shell ring-shaped microstructure model, which was incomplete Ti nuclei, Ti 3Al, TiAl and TiAl 2 phases from inside to outside. The average microhardness of the substrate, interface and coating were 508.57, 454.54 and 377.18 HV 0.2 , respectively. The microhardness fluctuation was the largest at the coating-substrate interface. The oxidation kinetics of the as-received coating approximately followed a linear rate law with an oxidation rate constant of 0.3943 mg·cm −2·h −1 and a rate exponent of 1.2372. The oxide layer consisted of an outer layer of TiO 2, an inner layer of nitrogen-containing compounds and a mixed layer of TiO 2 and Al 2O 3 between them. The corrosion mechanism of the as-received Ti-Al IMC coatings in molten A380 alloy was mainly controlled by the combination of compounds formed at the liquid-solid interface and diffusion of liquid metal into the as-received Ti-Al coating, rather than by the dissolution mechanism of the as-received Ti-Al coating.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Intermetallics: why is it so difficult to introduce them in gas turbine engines10.1016/j.intermet.2006.01.064 ↗
2. Recent advances in ordered intermetallics10.1016/0254-0584(95)01546-9 ↗
3. Modeling concepts for intermetallic titanium aluminides10.1016/j.pmatsci.2016.01.001 ↗
4. Appel · 2011
5. Composite deposits based on titanium aluminide produced by plasma spraying10.1016/S0921-5093(01)01867-6 ↗
6. Oxidation behavior of thermal barrier coatings with a TiAl3 bond coat on γ-TiAl alloy10.1007/s11666-014-0186-y ↗
7. Characteristics of laser In-situ alloyed titanium aluminides coatings10.1016/j.promfg.2016.12.013 ↗
8. Structure and oxidation behavior of γ-TiAl coating produced by laser cladding on titanium alloy10.1016/j.surfcoat.2017.04.008 ↗
9. Fabrication of Ti-Al coatings by mechanical alloying method10.1016/j.surfcoat.2006.06.044 ↗
10. Intermetallic Ti-Al coatings for protection of titanium alloys: oxidation and mechanical behavior10.1016/S0257-8972(97)00472-6 ↗
11. Dissolution-precipitation mechanism of self-propagating high-temperature synthesis of TiC-Ni cermet10.1016/j.msea.2004.04.052 ↗
12. Barin · 1995
13. Self-propagating high-temperature synthesis of refractory inorganic compounds
14. Effect of heating rate on the combustion synthesis of Ti-Al intermetallic compounds10.1007/BF01165971 ↗
15. Spin combustion of gasless systems10.1007/BF00785083 ↗
16. M. Adeli, S.H. Seyedein, M.R. Aboutalebi, M. Kobashi, N. Kanetake, 2016. The self- propagating high temperature synthesis of titanium aluminides: a parametric study, in: Proceedings of the 2nd World Congress on Mechanical, Chemical, and Material Engineering (MCM’16), Budapest, Hungary, August 22–23, 2016.10.11159/mmme16.114 ↗
17. A study on the combustion synthesis of titanium aluminide in the self-propagating mode10.1016/j.jallcom.2010.03.050 ↗
18. Effect of preheating temperature on the microstructure and corrosion resistance of TiC-Ni coating by CS/PHIP
19. Self-propagating high-temperature synthesis of advanced materials and coatings10.1080/09506608.2016.1243291 ↗
20. Applying FeAl coating on the low carbon steel substrate through self-propagation high temperature synthesis (SHS) process10.1016/j.surfcoat.2015.12.029 ↗
21. Synthesis and fabrication of NiAl coatings with Ti underlayer using induction heating10.1016/j.surfcoat.2014.09.037 ↗
22. Ni-Al-Ti coatings obtained by microwave assisted SHS: effect of annealing on microstructural and mechanical properties10.1016/j.surfcoat.2008.11.017 ↗
23. NiAl intermetallic coatings elaborated by a solar assisted SHS process10.1016/j.intermet.2005.11.022 ↗
24. Tamburini, Ignition mechanism in combustion synthesis of Ti-Al and Ti-Ni systems10.1016/S0966-9795(02)00128-0 ↗
25. Corrosion and thermal fatigue behaviors of induction-clad Ni-coated TiC particle-reinforced Ni60 coating in molten aluminum alloy10.1016/j.surfcoat.2021.127278 ↗
26. Study on the microstructure and wear behavior of in-situ Al3Ti/Al composites under induction heating
27. Formation of Ti-Al phases during SHS process10.12693/APhysPolA.134.743 ↗
28. Friction and wear behavior of a Ni-based alloy coating fabricated using a multistep induction cladding technique10.1016/j.rinp.2018.08.049 ↗
29. Microstructure and wear behaviour of Ni-based alloy coated onto grey cast iron using a multi-step induction cladding process10.1016/j.rinp.2018.06.042 ↗
30. Implementation of DSC analysis in reaction kinetics during heating of Ti-50 at% Al powder mixture10.1007/s10973-016-5982-9 ↗
31. The effect of heating rate on the reactive sintering of Ti-48 % Al elemental powder mixture10.1023/A:1026412009992 ↗
32. Reaction synthesis of titanium aluminides10.1023/A:1012540927009 ↗
33. Effect of heating rate on porous TiAl-based intermetallics synthesized by thermal explosion10.1080/10426914.2016.1232826 ↗
34. Exothermic behavior and thermodynamic analysis for the formation of porous TiAl3 intermetallics sintering with different heating rates10.1016/j.jallcom.2019.152056 ↗
35. Simultaneous synthesis and consolidation of nanostructured ZrB2-ZrO2 composite10.1166/jnn.2020.17578 ↗
36. Synthesis of WC and dense WC-5vol% Co hard materials by high-frequency induction heated combustion10.1016/j.msea.2003.08.105 ↗
37. One step synthesis of dense MoSi2-SiC composite by high-frequency induction heated combustion and its mechanical properties10.1016/j.jallcom.2004.10.072 ↗
38. Development of freeform fabrication method for Ti-Al-Ni intermetallics10.1016/S0966-9795(02)00085-7 ↗
39. Microwave activated combustion synthesis of titanium aluminides10.1016/j.msea.2004.11.059 ↗
40. In-situ combustion synthesis and densification of TiC-xNi cermets10.1016/S0921-5093(99)00606-1 ↗
41. Ye · 2002
42. In situ formation of TiAl-TiB2 composite by SHS10.1016/j.jallcom.2005.06.053 ↗
43. On the formation of TiAl3 during reaction between solid Ti and liquid Al10.1023/A:1018509026596 ↗
44. Oxidation performance of cold spray Ti-Al barrier coated γ-TiAl intermetallic substrates10.1016/j.surfcoat.2014.12.004 ↗
45. Preparation of TiAl3-Al composite coating by cold spray and its high temperature oxidation behavior10.1007/s11666-010-9516-x ↗
46. Preparation of Ti-Al intermetallics by aluminum melt infiltration-diffusion annealing technique10.4028/www.scientific.net/MSF.561-565.367 ↗
47. Fabrication of Ti-Al3Ti core-shell structured particle reinforced Al based composite with promising mechanical properties10.1016/j.msea.2015.05.015 ↗
48. Reactive synthesis and characterization of titanium aluminides produced from elemental powder mixtures10.1007/s10973-015-4815-6 ↗
49. Formation kinetics and phase stability of in-situ Al3Ti particles in aluminum casting alloys with varying Si content
50. Review durability of materials in molten aluminum alloys10.1023/A:1004843621542 ↗
51. Diffusion in the titanium-aluminum system-I. interdiffusion between solid Al and Ti or Ti-Al alloys10.1016/0001-6160(73)90220-4 ↗
52. On the kinetics of TiAl3 intermetallic layer formation in the titanium and aluminum diffusion couple10.1016/j.intermet.2012.08.017 ↗
53. Solute effect of Cu on interdiffusion in Al3Ti compound films10.1103/PhysRevB.32.2070 ↗
54. Phase formation kinetics of titanium aluminides produced from elemental powder mixtures
55. Pore constitution and tortuosity factor of reactively synthesized porous TiAl intermetallic compound10.1016/S1003-6326(21)65533-4 ↗
56. Effects of Al content and addition of third element on fabrication of Ti-Al intermetallic coatings by heat treatment of warm-sprayed precursors10.1007/s11666-015-0245-z ↗
57. Oxidation inhibition of γ-TiAl alloy at 900 °C by inorganic silicate composite coatings10.1016/j.corsci.2013.07.001 ↗
58. Effect of hot-dip aluminizing on the oxidation resistance of Ti-6Al-4V alloy at high temperatures10.1016/j.corsci.2011.10.029 ↗
59. Callister · 2008
60. Mechanism of isothermal oxidation of the intel-metallic TiAl and of TiAl alloys10.1007/BF00665663 ↗
61. The effect of nitrogen on the oxidation of γ-TiAl
62. Growth stresses in the oxide scales on TiAl alloys at 800 and 900 °C10.1023/A:1020110905907 ↗
63. On the conjoint influence of heat treatment and lithium content on microstructure and mechanical properties of A380 aluminum alloy10.1016/j.matdes.2014.02.033 ↗
64. Influence of Al addition on the products of self-propagating high-temperature synthesis of Al-Ti-Si system10.1016/j.matchemphys.2008.10.024 ↗
65. Growth characterisation of TiAl3 during initial period of hot dip aluminising on Ti6Al4V10.1080/00202967.2021.1894704 ↗
66. Effect of silicon, manganese and nickel present in iron on the intermetallic growth at iron-aluminum alloy interface10.1016/j.jallcom.2018.07.364 ↗
67. The nature and growth of interaction layers formed during the reaction between solid titanium and liquid aluminum10.1016/0022-5088(59)90062-1 ↗