journal article·2023-03Open access

Microstructure and oxidation behavior of Co–Cr–Ta ternary alloys

Moreau Louis Etienne, Gorsse Stéphane, Lambard Guillaume, Murakami Hideyuki

Abstract

The improvement of oxidation resistance of alloys is one of the key points to develop components for ultra-high temperature applications. The formation of a CrTaO 4 oxide layer has attracted attention because of its thermal stability and good protection against oxidation above 1000 °C where more commonly used protective oxide layers such as Cr 2O 3 show their limits. This study investigates the microstructure evolution and oxidation resistance of the Co-Cr-Ta ternary alloys in comparison to the Calphad predictions. The Co-Cr-Ta samples tested here are composed of an FCC Co-rich phase and a C15 laves phase, and an increase of Cr content was linked to the formation and growth of an additional σ phase. Thermogravimetric analysis, together with the isothermal oxidation tests in air at 1200 °C proved that alloys exhibited good oxidation resistance formed a continuous CrTaO 4 layer. Also, optimization of Co-Cr-Ta composition with improved oxidation resistance was attempted using data-driven strategy and the results demonstrated the potential of such approach for the future of alloy design.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. High-entropy alloys – a new era of exploitation10.4028/www.scientific.net/MSF.560.1 ↗
2. Microstructure and oxidation behavior of new refractory high entropy alloys10.1016/j.jallcom.2013.08.102 ↗
3. Okada, I. & Torigoe, Taiji & Takahashi, K. & Izutsu, D. (2004). Development of Ni Base Superalloy for Industrial Gas Turbine. Proceedings of the International Symposium on Superalloys. 707–712. DOI: 〈10.7449/2004/Superalloys_2004_707_712〉.10.7449/2004/Superalloys_2004_707_712 ↗
4. A novel strategy for the design of advanced engineering alloys-strengthening turbine disk superalloys via twinning structures
5. Oxidation of Metals and Alloys10.1016/B978-044452787-5.00013-5 ↗
6. 5 - High Temperature Oxidation
7. Berkowitz-Mattuck, J. and Rossetti, M., Basic Factors Controlling Pest in High Temperature Systems, NASA CR 125071 (National Aeronautics and Space Administration, Washington, DC, 1971).
8. Development of oxidation resistant high temperature intermetallics10.1179/mst.1992.8.4.339 ↗
9. Chevalier, Sébastien. (2008). Formation and growth of protective alumina scales. DOI: 〈10.1533/9781845694258.2.290〉.10.1533/9781845694258.2.290 ↗
10. Oxygen diffusion in alumina. Application to synthetic and thermally grown Al2O310.4028/www.scientific.net/DDF.237-240.899 ↗
11. Influence of aluminium addition on oxidation resistance of Ta-W alloy10.1080/00325899.2019.1662559 ↗
12. Silica thin films applied to Ni-20Cr alloy via combustion chemical vapor deposition10.1016/S0257-8972(97)00469-6 ↗
13. High-temperature oxidation behavior of SiO2 protective layer deposited on IN738LC superalloy by combustion CVD (CCVD)10.1016/j.apsusc.2009.07.092 ↗
14. Cracking and spalling of protective oxide layers10.1016/0921-5093(89)90731-4 ↗
15. Ben Naji, Loai & Ibrahim, Osama & Al-Fadhalah, Khaled (2018). Formation of Protective Aluminum-Oxide Layer on the Surface of Fe-Cr-Al Sintered-Metal-Fibers via Multi-Stage Thermal Oxidation.
16. High temperature oxidation resistance and corrosion properties of dip coated silica coating by sol gel method on stainless steel10.1007/s10971-012-2786-7 ↗
17. Chromium and chromium-based alloys: problems and possibilities for high-temperature service10.1007/s11837-004-0197-0 ↗
18. Birks · 2006
19. Microstructure and morphology of high temperature oxidation in superalloys10.1016/S0921-5093(98)01181-2 ↗
20. Effects of ageing conditions on the precipitates evolution, chromium depletion and intergranular corrosion susceptibility of AISI 316L: experimental and modeling results10.1016/j.msea.2003.12.017 ↗
21. Prediction of chromium depleted-zone evolution during aging of Ni–Cr–Fe alloys10.1016/S1359-6454(01)00444-X ↗
22. The influence of CrTaO4layer on the oxidation behavior of a directionally-solidified nickel-based superalloy at 850–900 °C10.1016/j.jallcom.2017.07.066 ↗
23. Effects of Cr, W, and Mo on the high temperature oxidation of Ni-based superalloys10.3390/ma12182934 ↗
24. The oxidation of Co-20% Cr base alloys containing Nb or Ta10.1016/S0010-938X(75)80015-1 ↗
25. The Co-Cr-Ta (Cobalt-Chromium-Tantalum) System10.1007/s11669-005-0072-x ↗
26. Zhang, Z.-S. & He, Yin-Huan & Huang, B.-Y. & Peng, Chaoqun (2002). Microstructure and hardness of binary Cr-Ta alloys. Transactions of Nonferrous Metals Society of China (English Edition). 12. 210–213.
27. Designing high entropy superalloys for elevated temperature application10.1016/j.scriptamat.2020.06.002 ↗
28. An approach to predict microstructural stability
29. About the reliability of CALPHAD predictions in multicomponent systems10.3390/e20120899 ↗
30. Duc, N. (2014). Formation of 3D-moments and spin fluctuations in the rare earth - Transition metal intermetallics.
31. Determination of solidus and liquidus temperatures for S34MnV steel grade by thermal analysis and calculations
32. J. Faber and T. Fawcett, The Powder Diffraction File: present and future, Acta Cryst. (2002). B58, 325–332, DOI: 〈10.1107/S0108768102003312〉.10.1107/S0108768102003312 ↗
33. Thermogravimetric analysis of superalloys used for blade and vane applications in industrial gas turbine10.1007/BF02549941 ↗
34. On the fcc/ hcp transformation in a cobalt-base superalloy (Haynes alloy No. 25)10.1007/BF01748098 ↗
35. Optimization of direct extrusion process for Nd-Fe-B magnets using active learning assisted by machine learning and Bayesian optimization
36. Oxidation behaviour of a novel refractory high entropy alloy at elevated temperatures10.1016/j.intermet.2020.106711 ↗
37. A new strategy to intrinsically protect refractory metal-based alloys at ultra-high temperatures10.1016/j.corsci.2020.108475 ↗
38. Current status of research on the oxidation behavior of refractory high entropy alloys10.1002/adem.202001047 ↗
39. High-temperature oxidation behavior of refractory high-entropy alloys: effect of alloy composition10.1007/s11085-016-9696-y ↗
40. On the oxidation mechanism of refractory high entropy alloys10.1016/j.corsci.2019.108161 ↗
41. Random forests
42. The Jackknife, the Bootstrap and Other Resampling Plans
43. Efficient global optimization of expensive black-box10.1023/A:1008306431147 ↗
44. Scikit-learn: machine learning in python gaël varoquaux bertrand thirion vincent dubourg alexandre passos Pedregosa, Varoquaux, Gramfort et aL. Matthieu Perrot
45. GitHub SheffieldML/GPyOpt: Gaussian Process Optimization using GPy. 〈https://github.com/SheffieldML/GPyOpt〉.