Exploring the anneal hardening phenomenon in nanocrystalline Pt-Ru alloys
Source abstract
Abstract
Pt and its alloys have important applications in the field of catalysis or in the jewellery industry. Especially in the latter case sufficient strength is necessary to ensure wear resistance. We thus explore here the potential of severe plastic deformation on the strengthening behaviour of two Pt-Ru alloys. Depending on the Ru content and the deformation conditions hardness values of up to 6.5 GPa could be achieved. A further hardness increase to more than 7 GPa can be obtained by adequate recovery annealing. Indentation with different tip geometries indicates that the specimens undergo significant strain softening after the heat treatment. The results further show that the anneal hardening effect occurs only below a specific threshold grain size, with the extent increasing towards smaller grains. This can be rationalized by the increasing role of grain boundaries for mechanical properties at the submicron scale. Considering different possible origins of the hardness increase and bearing in mind that indentation techniques sample the strength at rather large plastic strains, the results seem to be best explained by annihilation of lattice dislocations and grain boundary defects, complicating the absorption of dislocations at the grain boundaries after the heat treatments.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. The hardening of platinum alloys for potential jewellery application10.1595/147106705X24409 ↗
2. Microstructure analysis of selected platinum alloys10.1595/147106711X554008 ↗
3. Automobile exhaust catalysis at the atomic scale: Atom-probe investigations on platinum alloys
4. Stability of platinum based alloy cathode catalysts in PEM fuel cells10.1016/j.jpowsour.2005.05.011 ↗
5. Multiphoton lithography of nanocrystalline platinum and palladium for site-specific catalysis in 3D microenvironments10.1021/ja211602t ↗
6. Using high-pressure torsion for metal processing: fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
7. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
8. Novel ultra-high straining process for bulk materials development of the accumulative roll-bonding (ARB) process10.1016/S1359-6454(98)00365-6 ↗
9. Hardening by annealing and softening by deformation in nanostructured metals10.1126/science.1124268 ↗
10. Nanostructured metals: Less is more10.1038/nmat1671 ↗
11. Grain boundary relaxation strengthening of nanocrystalline Ni–W alloys10.1557/jmr.2012.55 ↗
12. Increasing the strength of nanocrystalline steels by annealing: Is segregation necessary10.1016/j.scriptamat.2014.09.023 ↗
13. Effect of solute segregation on the strength of nanocrystalline alloys: Inverse Hall-Petch relation10.1016/j.actamat.2007.05.018 ↗
14. Effects of annealing and impurities on tensile properties of electrodeposited nanocrystalline Ni10.1016/j.scriptamat.2004.08.015 ↗
15. Influences of grain size and grain boundary segregation on mechanical behavior of nanocrystalline Ni10.1016/j.msea.2009.12.005 ↗
16. Grain boundary segregation induced strengthening of an ultrafine-grained austenitic stainless steel10.1016/j.matlet.2014.07.188 ↗
17. Grain boundary stability governs hardening and softening in extremely fine nanograined metals10.1126/science.aal5166 ↗
18. Anneal hardening and elevated temperature strain rate sensitivity of nanostructured metals: Their relation to intergranular dislocation accommodation10.1016/j.actamat.2018.12.002 ↗
19. Annealing-induced hardening in ultrafine-grained and nanocrystalline materials10.1002/adem.201900507 ↗
20. On non-equilibrium grain boundaries and their effect on thermal and mechanical behaviour: a molecular dynamics computer simulation10.1016/S1359-6454(02)00195-7 ↗
21. Limits of hardness at the nanoscale: Molecular dynamics simulations10.1103/PhysRevB.78.241402 ↗
22. Microstructural evolution during the heat treatment of nanocrystalline alloys10.1557/JMR.2007.0403 ↗
23. Ultra-fast diffusion channels in pure Ni severely deformed by equal-channel angular pressing10.1016/j.actamat.2010.11.063 ↗
24. Probing defect relaxation in ultra-fine grained Ta using micromechanical spectroscopy10.1016/j.actamat.2019.12.011 ↗
25. Sample dimensions influence strength and crystal plasticity10.1126/science.1098993 ↗
26. The stress at which dislocations multiply in well-annealed metal crystals10.1016/0001-6160(68)90117-X ↗
27. Nanostructure and related mechanical properties of an Al-Mg-Si alloy processed by severe plastic deformation10.1080/09500830802186938 ↗
28. On the origin of the extremely high strength of ultrafine-grained Al alloys produced by severe plastic deformation10.1016/j.scriptamat.2010.07.014 ↗
29. Reaching theoretical strengths in nanocrystalline Cu by grain boundary doping10.1016/j.scriptamat.2011.06.048 ↗
30. The influence of time, temperature, and grain size on indentation creep in high-purity nanocrystalline and ultrafine grain copper10.1063/1.1828213 ↗
31. Grain coarsening during compression of bulk nanocrystalline nickel and copper10.1016/j.scriptamat.2007.08.042 ↗
32. Microstructural study of the parameters governing coarsening and cyclic softening in fatigued ultrafinegrained copper10.1080/01418610208235689 ↗
33. Plastic strain triggers structural instabilities upon cyclic loading in ultrafine-grained nickel10.1016/j.actamat.2020.08.049 ↗
34. Effect of recrystallization on diffusion in ultrafine-grained Ni10.1016/j.actamat.2014.02.002 ↗
35. Hardening by annealing: insights from different alloys10.1088/1757-899X/89/1/012043 ↗
36. Solubility relationships in the ruthenium-platinum system10.1595/003214072X1638890 ↗
37. On the onset of a steady state in body-centered cubic iron during severe plastic deformation at low homologous temperatures10.1007/s11661-007-9413-1 ↗
38. Saturation of grain refinement during severe plastic deformation of single phase materials: Reconsiderations, current status and open questions10.2320/matertrans.MF201918 ↗
39. Plastic indentation in metals with cones10.1016/0022-5096(65)90018-9 ↗
40. Elevated temperature, nano-mechanical testing in situ in the scanning electron microscope10.1063/1.4795829 ↗
41. Improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
42. Nanoindentation strain-rate jump tests for determining the local strain-rate sensitivity in nanocrystalline Ni and ultrafine-grained Al10.1557/jmr.2011.156 ↗
43. Effect of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity and activation volume: Fcc versus bcc metals10.1016/j.msea.2004.03.064 ↗
44. High temperature mechanical properties of the platinum group metals: Elastic properties of platinum, rhodium and iridium and their alloys at high temperatures10.1595/003214001X4527482 ↗
45. Humphreys · 2004
46. Temperature-dependent strain rate sensitivity and activation volume of nanocrystalline Ni10.1016/j.actamat.2006.02.013 ↗
47. The effect of grain size on strain rate sensitivity and activation volume - From nano to ufg nickel
48. How grain boundary characteristics influence plasticity close to and above the critical temperature of ultra-fine grained bcc Ta2.5W10.1016/j.actamat.2021.117110 ↗
49. Caillard · 2003
50. How the interface type manipulates the thermomechanical response of nanostructured metals: a case study on nickel10.1016/j.mtla.2021.101020 ↗
51. Achieving 1 GPa fatigue strength in nanocrystalline 316L steel through recovery annealing10.1016/j.scriptamat.2022.114773 ↗
52. Enhanced grain refinement of an Al-Mg-Si alloy by high-pressure torsion processing at 100°C10.1016/j.msea.2012.05.063 ↗
53. Size-dependent solute segregation and total solubility in ultrafine polycrystals: Ca in TiO210.1016/0956-7151(95)90288-0 ↗
54. Mechanical grain growth in nanocrystalline copper10.1103/PhysRevLett.96.215506 ↗
55. Dependence of nanohardness upon indentation size and grain size - A local examination of the interaction between dislocations and grain boundaries10.1016/j.actamat.2006.09.004 ↗
56. Kinetics of grain boundary recovery in deformed polycrystals10.1023/A:1008720710330 ↗
57. Priester · 2013
58. The effect of the spreading of grain boundary dislocations on the tensile behaviour of a fine-grained austenitic steel at high temperatures10.1016/0025-5416(80)90123-8 ↗
59. Correlation between the kinetics of dislocation annihilation in grain boundaries and the hardening of polycrystals10.1016/0025-5416(85)90162-4 ↗
60. The Hall–Petch relation in aluminium and its dependence on the grain boundary structure10.1080/01418618608242849 ↗
61. Mechanical behavior of Pt and Pt-Ru solid solution alloy thin films10.1016/j.actamat.2004.05.034 ↗
62. Platinum alloys: a selective review of the available literature10.1595/147106713X668596 ↗
63. Lüders deformation in ultrafine-grained pure aluminium10.1016/0025-5416(82)90173-2 ↗
64. Transition of tensile deformation behaviors in ultrafine-grained aluminum10.1016/j.actamat.2005.05.005 ↗
65. Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing10.1016/S1359-6462(02)00282-8 ↗
66. Remarkable transitions of yield behavior and Lüders deformation in pure Cu by changing grain sizes10.1016/j.scriptamat.2017.08.034 ↗