journal article·2023-02

Deformation and recrystallization behavior of the new Ni-Co based superalloy ingot material prepared by electron beam smelting layered solidification

Hongyang Cui, Yi Tan, Rusheng Bai, Lidan Ning, Xiaogang You, Chuanyong Cui, Pengting Li

Publisher page

Abstract

The hot deformation behavior of a Ni-Co based superalloy prepared by electron beam smelting layered solidification (EBSL-Ni-Co superalloy) was studied by hot compression tests under the temperature range of 1070–1180 °C and the strain rate range of 0.001–1 s −1 with a true strain of 0.693. The results show that the flow stress increases with the increase of strain rate and the decrease of deformation temperature, and the friction effect and adiabatic heating effect make the measured value of material flow stress higher than the real value. The hyperbolic sine Arrhenius equation was developed based on the γ` phase solution temperature, and the plastic flow stress model of the EBSL-Ni-Co superalloy was established. The deformation activation energies of the alloy in the γ + γ′ dual-phase and γ single-phase regions were 621.6 kJ/mol and 368.6 kJ/mol, respectively. The processing map of the superalloy was constructed based on the dynamic material model (DMM). Combined with the variation of microstructure, the optimum hot deformation processing conditions of the superalloy were determined. The increase of strain rate and the decrease of deformation temperature, the proportion of low-angle grain boundaries (LAGBs), and the reduction of recrystallization. Additionally, the hot deformation behavior of the EBSL-Ni-Co superalloy was found to be greatly influenced by the coarsening of γ` phase solution temperature.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · High Temperature Alloys and Creep · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Composition design, phase transitions of a new polycrystalline Ni-Cr-Co-W base superalloy and its isothermal oxidation dynamics behaviors at 1300 °C10.1016/j.matdes.2017.05.028 ↗
2. Influence of Ta content on microstructure and creep behavior of a Ni–Co base disc superalloy10.1016/j.msea.2020.140646 ↗
3. Computational materials design: composition optimization to develop novel Ni-based single crystal superalloys10.1016/j.commatsci.2021.111021 ↗
4. Comparison of mechanical properties of TMW alloys, new generation of cast-and-wrought superalloys for disk applications10.1007/s11661-009-0032-x ↗
5. A novel strategy for the design of advanced engineering alloysa-strengthening turbine disk superalloys via twinning structures10.1002/adem.201000232 ↗
6. Microsegregation of a new Ni-Co-based superalloy prepared by electron beam smelting layered solidification technology and its homogenization behavior10.1016/j.matchar.2021.111668 ↗
7. Hot deformation behavior and processing workability of a Ni-based alloy10.1016/j.jallcom.2018.08.010 ↗
8. Characterization of mechanisms of hot deformation of as-cast nickel aluminide alloy10.1016/S0966-9795(00)00048-0 ↗
9. Thermal deformation and dynamic recrystallization of a novel HEXed P/M nickel-based superalloy
10. Deformation behavior and processing maps of Ni3Al-based superalloy during isothermal hot compression10.1016/j.jallcom.2017.04.116 ↗
11. Characterization of hot deformation behavior and processing map of FGH4096-GH4133B dual alloys10.1016/j.jallcom.2015.02.010 ↗
12. Precipitate coarsening and its effects on the hot deformation behavior of the recently developed γ’-strengthened superalloys10.1016/j.jmst.2020.06.025 ↗
13. Development of new γ′-strengthened Co-based superalloys with low mass density, high solvus temperature and high temperature strength10.1016/j.msea.2020.139578 ↗
14. Overgrown grains appearing during sub-solvus heat treatment in a polycrystalline γ-γ’ Nickel-based superalloy10.1016/j.matdes.2018.02.048 ↗
15. Heteroepitaxial recrystallization: a new mechanism discovered in a polycrystalline γ-γ′ nickel based superalloy10.1016/j.jallcom.2016.07.240 ↗
16. Impact of γ′(Ni3(Al,Ti)) phase on dynamic recrystallization of a Ni-based disk superalloy during isothermal compression10.1016/j.jallcom.2016.09.258 ↗
17. Effect of pre-treatment on hot deformation behavior and processing map of an aged nickel-based superalloy10.1016/j.jallcom.2015.07.213 ↗
18. The hot deformation behaviors of coarse, fine and mixed grain for Udimet 720Li superalloy10.1016/j.msea.2015.10.099 ↗
19. A new method for evaluation of friction in bulk metal forming10.1016/j.jmatprotec.2004.03.029 ↗
20. Axisymmetric compression test and hot working properties of alloys10.1179/026708301101510843 ↗
21. A verified solution of friction factor in compression test based on its sample’s shape changes10.1016/j.ijmecsci.2020.106175 ↗
22. The adiabatic correction factor for deformation heating during the uniaxial compression test10.1361/105994901770344593 ↗
23. Hot deformation behavior and workability of a Ni–Co based superalloy10.1016/j.jallcom.2020.154618 ↗
24. Effect of temperature and strain rate on the compressive deformation behavior of 42CrMo steel10.1016/j.jmatprotec.2007.11.113 ↗
25. Flow behavior and dynamic recrystallization of a power metallurgy nickel-based superalloy during hot compression in (γ + γ′)-phase region10.1016/j.jallcom.2021.161944 ↗
26. Effect of Zener-Hollomon parameter on microstructure evolution of a HEXed PM nickel-based superalloy10.1016/j.jallcom.2021.159889 ↗
27. Constitutive modelling of hot deformation behaviour of metallic materials10.1016/j.msea.2021.142473 ↗
28. Mechanical behavior and deformation mechanism of shape memory bulk metallic glass composites synthesized by powder metallurgy10.1016/j.jmst.2021.10.002 ↗
29. Variation of activation energy determined by a modified Arrhenius approach: roles of dynamic recrystallization on the hot deformation of Ni-based superalloy10.1016/j.jmst.2020.09.024 ↗
30. Additive manufacturing – a review of hot deformation behavior and constitutive modeling of flow stress10.1016/j.cossms.2022.100992 ↗
31. On the mechanism of hot deformation10.1016/0001-6160(66)90207-0 ↗
32. Hot compression behaviors and deformation mechanisms of a Ni–Co-based superalloy with columnar grains10.1016/j.msea.2021.142370 ↗
33. Hot deformation behavior and flow stress modeling of a novel CoNi-based wrought superalloy10.1016/j.jallcom.2021.162489 ↗
34. Plastic deformation behavior of spray formed superalloy FGH10010.1016/j.msea.2017.02.063 ↗
35. Microstructural evolution of a Ni-Co based superalloy during hot compression at γ′ sub-/super-solvus temperatures10.1016/j.jmst.2020.10.042 ↗
36. The effect of cooling rates from temperatures above the γ′ solvus on the microstructure of a new nickel-based powder metallurgy superalloy10.1016/j.jallcom.2018.03.072 ↗
37. Effect of strain rate upon plastic flow of steel10.1063/1.1707363 ↗
38. Characterization of the hot deformation behavior of a newly developed nickel-based superalloy10.1007/s11665-018-3270-5 ↗
39. Dislocation substructures developed during dynamic recrystallisation in polycrystalline nickel10.1179/mst.1990.6.12.1251 ↗
40. Experimental study and numerical simulation of dynamic recrystallization for a FGH96 superalloy during isothermal compression10.1016/j.jmrt.2020.03.026 ↗
41. The dynamic recrystallization evolution and kinetics of Ni-18.3Cr-6.4Co-5.9W–4Mo-2.19Al-1.16Ti superalloy during hot deformation10.1557/jmr.2015.78 ↗
42. Hot workability integrating processing and activation energy maps of Inconel 740 superalloy10.1016/j.mtcomm.2018.01.009 ↗
43. Role of solidification texture on hot deformation behavior of a Cu–Ni–Si alloy with columnar grains10.1016/j.msea.2021.141862 ↗
44. Modeling of dynamic material behavior in hot deformation: forging of Ti-624210.1007/BF02664902 ↗
45. Processing maps: A status report10.1007/s11665-013-0732-7 ↗
46. DDRX and CDRX of an as-cast nickel-based superalloy during hot compression at γ′ sub-/super-solvus temperatures10.1016/j.jallcom.2019.06.202 ↗
47. Grain fragmentation associated continuous dynamic recrystallization (CDRX) of hexagonal structure during uniaxial isothermal compression: High-temperature α phase in TiAl alloys10.1016/j.intermet.2020.107028 ↗
48. Quantifying primary recrystallization from EBSD maps of partially recrystallized states of an IF steel10.1016/j.matchar.2020.110773 ↗
49. Quasi in-situ analysis of geometrically necessary dislocation density in α-fibre and γ-fibre during static recrystallization in cold-rolled low-carbon Ti-V bearing microalloyed steel10.1016/j.matchar.2018.09.032 ↗
50. A new grain orientation spread approach to analyze the dynamic recrystallization behavior of a cast-homogenized Mg-Zn-Zr alloy using electron backscattered diffraction10.1016/j.msea.2017.10.062 ↗