Soft magnetic composites based on Fe fibres and powders prepared by cold sintering process
Source abstract
Abstract
The manuscript provides a new strategy for preparation of soft magnetic composites that involves the consolidation of the ferromagnetic phase (fibres or powders), which is first covered with an insulating layer, via the cold sintering process. The manuscript reports on the preparation and characterisation of cold sintered compacts based on Fe fibres and Fe powders coated with ZnO and sintered at the temperature of 200 °C for 60 min under the pressure of 600 MPa. The amount of ZnO used as dielectric phase was 10 and 20 wt%. The absence of any reaction between phases that compose the compacts (Fe fibres or powders and ZnO) during the cold sintering process was proved by X-ray diffraction (XRD). Electron microscopy and X-ray micro-analysis (SEM-EDX) were used for morphology and chemical analysis of the cold sintered compacts. The influence of the type of ferromagnetic phase (fibres or particles), as well as the influence of the amount of dielectric phase on the saturation induction (Bs), the coercive field (Hc), and the maximum relative permeability (µrmax) of the cold sintered magnetic cores, was investigated and discussed. The effect of the same factors on the total core power losses (P) and the initial relative permeability (µri) of the cold sintered compacts, upon increasing the frequency of the magnetising field up to 10 kHz, was analysed. The feasibility of applying a heat treatment at the temperature of 450 °C for 1 h was investigated, leading to the enhancement of both DC and AC magnetic properties of the cold sintered compacts.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Metallic Glasses and Amorphous Alloys · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Soft magnetic composite materials (SMCs)10.1016/j.jmatprotec.2007.02.034 ↗
2. Past, present, and future of soft magnetic composites10.1063/1.5027045 ↗
3. Soft magnetic composites: recent advancements in the technology10.1016/j.mprp.2016.08.003 ↗
4. Soft magnetic materials for a sustainable and electrified world10.1126/science.aao0195 ↗
5. Advanced soft magnetic composite materials for AC applications with reduced iron losses10.1080/00325899.2015.1133080 ↗
6. Effect of iron particle size and volume fraction on the magnetic properties of Fe/silicate glass soft magnetic composites10.1016/j.jmmm.2014.09.019 ↗
7. Effects of heat treatment and compaction pressure on the microstructure and magnetic properties of core-shell structured FeSiBNbCu/SiO2 soft magnetic composites10.1016/j.jallcom.2022.166394 ↗
8. C.A. Randall, J. Guo, A. Baker, M. Lanagan, H. Guo, Cold sintering ceramics and composites, Patent Application Publication, no. US 2017/0088471 A1, 2017.
9. A review of cold sintering processes10.1080/17436753.2019.1706825 ↗
10. The cold sintering process: a review on processing features, densification mechanisms and perspectives10.1016/j.jeurceramsoc.2021.09.024 ↗
11. Cold sintering: progress, challenges, and future opportunities10.1146/annurev-matsci-070218-010041 ↗
12. Mechanism studies of hydrothermal cold sintering of zinc oxide at near room temperature10.1111/jace.16340 ↗
13. Cold sintering and co-firing of a multilayer device with thermoelectric materials10.1111/jace.14852 ↗
14. Soft magnetic composite based on mechanically alloyed nanocrystalline Ni3Fe phase10.1016/j.jmmm.2004.11.249 ↗
15. Design of novel soft magnetic composites based on Fe/resin modified with silica
16. Characterization of composite materials based on Fe powder (core) and phenoleformaldehyde resin (shell) modified with nanometer-sized SiO210.1007/s12034-014-0644-7 ↗
17. Preparation of Fe–Si–Ni soft magnetic composites with excellent high-frequency properties10.1016/j.jmmm.2014.12.073 ↗
18. AC magnetic properties of the soft magnetic composites based on Supermalloy nanocrystalline powder prepared by mechanical alloying10.1016/j.mseb.2012.03.029 ↗
19. Soft magnetic composites based on hybrid coated Fe-Si nanocrystalline powders10.1016/j.surfcoat.2017.09.088 ↗
20. L.P. Lefebvre, A.L. Dawson, S. Pelletier, Y. Deslandes, G. Pleizier, Int. J. Powder Metall. 34 (1998) 51–58.
21. Systematic investigation of particle size dependence of magnetic properties in soft magnetic composites10.1016/j.jmmm.2008.02.072 ↗
22. Nacre-inspired, efficient, and multifunctional soft magnetic composites by cold sintering design10.1002/adem.202101377 ↗
23. Cold sintered metal–ceramic nanocomposites for high-frequency inductors10.1002/aelm.202000868 ↗
24. Preparation and characterisation of soft magnetic composites based on Fe fibres10.1007/s10853-019-04088-1 ↗
25. Properties of soft magnetic composites based on Fe fibres coated with SiO2 by hydrothermal method10.1016/j.jallcom.2020.154222 ↗
26. Soft magnetic composites based on oriented short Fe fibres coated with polymer10.1016/j.jallcom.2020.155731 ↗
27. Preparation and characterisation of Fe/Fe3O4 fibres based soft magnetic composites10.1016/j.ceramint.2020.08.165 ↗
28. Influence of fibres diameter on the AC and DC magnetic characteristics of Fe/Fe3O4 fibres based soft magnetic composites10.1016/j.ceramint.2020.09.015 ↗
29. The effect of compaction parameters and particle size on magnetic properties of iron-based alloys used in soft magnetic composites10.1016/j.mseb.2006.07.015 ↗
30. Crystal structure of iron(II) acetate10.1002/zaac.201000274 ↗
31. Studies of the oxidation of iron by water vapour using X-ray photoelectron spectroscopy and QUASES10.1016/j.susc.2004.08.035 ↗
32. Soft magnetic materials
33. Influence of resin type and content on electrical and magnetic properties of soft magnetic composites (SMCs)10.1016/j.powtec.2013.01.006 ↗
34. Evolution of phosphate coatings during high-temperature annealing and its influence on the Fe and FeSiAl soft magnetic composites10.1016/j.jallcom.2015.04.201 ↗
35. Influence of heat treatment on microstructures and magnetic properties of Fe-based soft magnetic composites prepared by co-precipitation method10.1016/j.jmmm.2018.12.049 ↗
36. Evolution of the insulation matrix and influences on the magnetic performance of Fe soft magnetic composites during annealing10.1016/j.jallcom.2016.05.277 ↗
37. Cullity · 2009