journal article·2023-01

Effects of deformation-induced martensitic transformation on quasi-static and dynamic compressive properties of metastable SiVCrMnFeCo high-entropy alloys

Dong Geun Kim, Min Cheol Jo, Hyoung Seop Kim, Byeong-Joo Lee, Sunghak Lee, Seok Su Sohn

Publisher page

Abstract

High-entropy alloys (HEAs) utilizing a deformation-induced martensitic transformation (DIMT) mechanism have been developed as they exhibit an excellent balance of strength, ductility, and toughness. Investigations on deformation behaviors under dynamic responses are essential for their wide and reliable cryogenic applications; however, the effects of DIMT on mechanical properties under dynamic and cryogenic environments have hardly been studied yet, especially in metastable HEAs. In this study, compressive properties of two SiVCrMnFeCo alloys having different initial microstructure and stability of face-centered-cubic (FCC) against the DIMT were investigated under both quasi-static and dynamic loadings and at room and cryogenic temperatures. Under dynamic loading, the extent of DIMT was reduced than that under quasi-static loading due to the increased adiabatic heating, which increased the stability of FCC and suppressed the DIMT behavior. Nevertheless, the activated DIMT with decreasing stability of FCC due to the increased Si content and the decreased test temperature enhanced overall compressive properties. However, the interrupted dynamic compressive test results showed that the shear localization and the formation of adiabatic shear band (ASB) were promoted as the martensite formed more by the DIMT, concurrently resulted in the deterioration of resistance to shear cracking. These findings suggest that the delicate control of stability of FCC would be significant in wide and effective applications of the metastable alloys toward cryogenic or dynamic environments.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
2. A fracture-resistant high-entropy alloy for cryogenic application10.1126/science.1254581 ↗
3. The relationship between toughness and microstructure in Fe-high Mn binary alloys10.1007/BF02668556 ↗
4. Fe-Mn alloys for cryogenic use: a brief survey of current research
5. Microstructural dependence of Fe-high Mn tensile behavior10.1007/BF02643961 ↗
6. Correlation between martensitic transformation and strain burst in retained austenite grains during nanoindentation investigation10.1007/s12540-020-00913-4 ↗
7. FCC to BCC transformation-induced plasticity based on thermodynamic phase stability in novel V10Cr10Fe45CoxNi35−x medium-entropy alloys10.1038/s41598-019-39570-y ↗
8. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
9. Ultrastrong duplex high-entropy alloy with 2GPa cryogenic strength enabled by an accelerated martensitic transformation10.1016/j.scriptamat.2019.06.026 ↗
10. Exceptional phase-transformation strengthening of ferrous medium-entropy alloys at cryogenic temperatures10.1016/j.actamat.2018.09.057 ↗
11. Body-centered-cubic martensite and the role on room-temperature tensile properties in Si-added SiVCrMnFeCo high-entropy alloys10.1016/j.jmst.2020.10.038 ↗
12. Effects of temperature and loading rate on phase stability and deformation mechanism in metastable V10Cr10Co30FexNi50−x high entropy alloys10.1016/j.msea.2021.140766 ↗
13. Effects of strain rate on room- and cryogenic-temperature compressive properties in metastable V10Cr10Fe45Co35 high-entropy alloy10.1038/s41598-019-42704-x ↗
14. Adiabatic shear localization in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2018.03.040 ↗
15. Multiple strengthening sources and adiabatic shear banding during high strain-rate deformation of AISI 321 austenitic stainless steel: effects of grain size and strain rate10.1016/j.msea.2017.11.045 ↗
16. Adiabatic shear localization in nanostructured face centered cubic metals under uniaxial compression10.1016/j.matdes.2016.05.081 ↗
17. The use of hat-shaped specimens to study the high strain rate shear behaviour of Ti-6Al-4V
18. Dynamic compression behavior of a Mg-Gd-Based alloy at elevated temperature10.1007/s12540-019-00558-y ↗
19. Role of retained austenite on adiabatic shear band formation during high strain rate loading in high-strength bainitic steels10.1016/j.msea.2020.139118 ↗
20. Understanding of adiabatic shear band evolution during high-strain-rate deformation in high-strength armor steel10.1016/j.jallcom.2020.155540 ↗
21. Deformation kinking in β-treated zirconium impacted by split Hopkinson pressure bar10.1016/j.scriptamat.2020.06.050 ↗
22. Martensite formation in conventional and isothermal tension of 304 austenitic stainless steel measured by X-ray diffraction10.1007/s11661-014-2422-y ↗
23. Correlation of dynamic compressive properties, adiabatic shear banding, and ballistic performance of high-strength 2139 and 7056 aluminum alloys10.1016/j.msea.2021.140757 ↗
24. Effects of Si on microstructure and work hardening behavior of Fe-17Mn-1.1C-xSi high manganese steels10.1007/s12540-020-00846-y ↗
25. Microstructure evolution and strengthening mechanism of Al0.4CoCu0.6NiSix(x=0-0.2) high entropy alloys prepared by vacuum arc melting and copper injection fast solidification10.1016/j.vacuum.2018.01.031 ↗
26. Some unique aspects of mechanical behavior of metastable transformative high entropy alloys10.1007/s11661-021-06138-3 ↗
27. Strain rate effects on the mechanical properties of an AlCoCrFeNi high-entropy alloy10.1007/s12540-020-00920-5 ↗
28. Construction of high strain rate loading constitutive model and failure model and prediction of forming limit for LA103Z magnesium alloy10.1007/s12540-021-01105-4 ↗
29. Quantitative phase fraction analysis of steel combined with texture analysis using time-of-flight neutron diffraction10.1007/s10853-017-1309-x ↗
30. Dynamic shear band propagation and failure in AISI 4340 steel10.1016/j.jmatprotec.2005.03.016 ↗
31. Twinning effects on the hot deformation behavior of AZ31 Mg alloy10.1016/j.matchar.2016.06.014 ↗
32. Hot deformation and grain refinement mechanisms of commercially pure titanium processed via three-directional cryo-compression10.1016/j.msea.2018.06.058 ↗
33. Characterization by scanning precession electron diffraction of an aggregate of bridgmanite and ferropericlase deformed at HP-HT10.1002/2017GC007244 ↗
34. Strain rate effects of dynamic compressive deformation on mechanical properties and microstructure of CoCrFeMnNi high-entropy alloy10.1016/j.msea.2018.02.031 ↗
35. Effects of grain size on body-centered-cubic martensitic transformation in metastable Fe46Co30Cr10Mn5Si7V2 high-entropy alloy10.1016/j.scriptamat.2020.11.005 ↗
36. Tensile and microstructural characteristics of Fe-24Mn steel welds for cryogenic applications10.1007/s12540-019-00320-4 ↗
37. Fracture resistance of high entropy alloys: a review10.1016/j.intermet.2018.05.013 ↗
38. Underlying mechanisms for deformation and fracture behaviour of some BCC and FCC high entropy alloys10.1016/j.tafmec.2021.102948 ↗