journal article·2022-12Open access

Accelerating design of novel Cobalt‐based superalloys based on first-principles calculations

Qiuzhi Gao, Xuming Zhang, Qingshuang Ma, Hongtao Zhu, Hailian Zhang, Linlin Sun, Huijun Li

Abstract

The discovery of ordered γ` phase in Co-Al-W based superalloys opens up a pathway for the development of novel Cobalt-based superalloys. γ` phase from binary compounds was calculated by first-principles methods, and the third alloying elements were also considered to stabilize and strengthen γ` phase, the ordered γ` phase with higher stability and more excellent mechanical properties was confirmed herein in novel Cobalt-based superalloys. The formation energies and lattice parameters of Co-X (X = Al, Mo, Nb, Ta, Ti, V, W) and Co-Ti-Z (Z = Al, V, Cr, Mo, Ta, W) were calculated, the results show that X = Ti and Z = Mo are better choices. The doping of Mo can stabilize the ordered L1 2-γ` phase and improve the mechanical properties of the γ` phase when Mo occupies Ti sites. The occupying preference of alloying elements in Co 3Ti lattice is analyzed, Al and Cr prefer to occupy Co sites in L1 2-Co 3Ti lattice, while V, Mo, Ta and W prefer to occupy Ti sites. The as-cast microstructure of the five superalloys is typical dendrite with γ/γ` two-phase region in the inter-dendrite. Besides, segregation phenomenon can be observed in the as-cast microstructure of the superalloys, and Ti prefers to enriched in the inter-dendrite, while other elements tend to be distributed in the dendritic arms.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Co-strengthening of dislocations and precipitates in alumina-forming austenitic steel with cold rolling followed by aging10.1016/j.msea.2021.142181 ↗
2. High-temperature oxidation behavior of modified 4Al alumina-forming austenitic steel: effect of cold rolling10.1016/j.jmst.2020.08.013 ↗
3. The effect of isothermal aging on creep behavior of modified 2.5Al alumina-forming austenitic steel10.1016/j.msea.2020.140219 ↗
4. EBSD analysis and mechanical properties of alumina-forming austenitic steel during hot deformation and annealing10.1016/j.msea.2019.04.005 ↗
5. High-temperature creep property deterioration of the alumina-forming austenitic steel: effect of σ phase10.1016/j.msea.2022.143126 ↗
6. Influence of precipitates evolutions in δ-ferrite and austenite matrix on mechanical properties of alumina-forming austenitic steel10.1016/j.msea.2022.143321 ↗
7. Effects of Al content on microstructures and high-temperature tensile properties of two newly designed CoNi-base superalloys10.1016/j.jallcom.2020.155337 ↗
8. Cyclic oxidation behavior of Al-Si coating on new γ′-strengthened cobalt-based superalloy: experimental study and first-principles calculation10.1016/j.corsci.2021.109422 ↗
9. Coarsening evolution of γ′ phase and failure mechanism of Co-Ni-Al-Ti-based superalloys during isothermal aging
10. Cobalt-base high-temperature alloys10.1126/science.1121738 ↗
11. High-temperature strength and deformation of γ/γ′ two-phase Co–Al–W-base alloys10.1016/j.actamat.2007.11.014 ↗
12. Understanding raft formation and precipitate shearing during double minimum creep in a γ′-strengthened single crystalline Co-base superalloy10.1080/14786435.2020.1836415 ↗
13. L12-strengthened multicomponent Co-Al-Nb-based alloys with high strength and matrix-confined stacking-fault-mediated plasticity10.1016/j.actamat.2022.117763 ↗
14. Accelerating the discovery of novel γ/γ' Co-based superalloys by probing temperature and alloying effects on the γ' precipitates10.1016/j.mtla.2021.101171 ↗
15. Effects of transition elements on the site preference, elastic properties and phase stability of L12 γ′-Co3(Al, W) from first-principles calculations10.1016/j.jallcom.2019.153179 ↗
16. Accelerating exploitation of Co-Al-based superalloys from theoretical study10.1016/j.matdes.2018.01.013 ↗
17. Thermodynamic, structural and elastic properties of Co3X (XTi, Ta, W, V, Al) compounds from first-principles calculations10.1016/j.intermet.2012.08.022 ↗
18. Atomic and electronic basis for solutes strengthened (010) anti-phase boundary of L12 Co3(Al, TM): a comprehensive first-principles study10.1016/j.actamat.2017.10.041 ↗
19. Low-density, W-free Co–Nb–V–Al-based superalloys with γ/γ’ microstructure10.1016/j.msea.2020.139977 ↗
20. Accelerated design of novel W-free high-strength Co-base superalloys with extremely wide γ/γ′ region by machine learning and CALPHAD methods10.1016/j.actamat.2020.01.004 ↗
21. Development of low-density γ/γ′ Co–Al–Ta-based superalloys with high solvus temperature10.1016/j.actamat.2020.02.049 ↗
22. A novel type of Co–Ti–Cr-base γ/γ′ superalloys with low mass density10.1016/j.actamat.2017.06.024 ↗
23. Precipitation behavior of a novel cobalt-based superalloy subjected to prior plastic deformations10.1016/j.matdes.2016.09.004 ↗
24. Influence of type and morphology of carbides on stress-rupture behavior of a cast cobalt-base superalloy10.1016/j.jallcom.2017.08.287 ↗
25. Isothermal oxidation behavior of W‐free Co–Ni–Al‐based superalloy at high temperature10.1002/maco.202112789 ↗
26. A new tungsten-free γ–γ' Co–Al–Mo–Nb-based superalloy10.1016/j.scriptamat.2014.11.009 ↗
27. Synthesis of a new tungsten-free γ–γ′ cobalt-based superalloy by tuning alloying additions10.1016/j.actamat.2014.11.016 ↗
28. Effect of Al, Ti and Cr additions on the γ-γ’ microstructure of W-free Co-Ta-V-Based superalloys10.1016/j.actamat.2019.04.031 ↗
29. Development of new γ′-strengthened Co-based superalloys with low mass density, high solvus temperature and high temperature strength10.1016/j.msea.2020.139578 ↗
30. Temperature dependence of thermodynamic stability and mechanical property of alloying Co3Ta compounds10.1016/j.jallcom.2019.06.170 ↗
31. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set - ScienceDirect10.1016/0927-0256(96)00008-0 ↗
32. Atomic-scale computational materials science10.1016/S1359-6454(99)00288-8 ↗
33. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
34. High-precision sampling for Brillouin-zone integration in metals10.1103/PhysRevB.40.3616 ↗
35. Effect of Cu addition on microstructure and properties of Fe–20Ni–14Cr alumina-forming austenitic steel10.1016/j.intermet.2021.107312 ↗
36. First-principles investigations of the electronic structure and properties related to shape-memory behavior in Mn2NiX (X = Al,Ga,In,Sn) alloys10.1063/1.3639301 ↗
37. Structural stability and mechanical properties of Co 3 (Al, M) (M = Ti, V, Cr, Zr, Nb, Mo, Hf, Ta, W) compounds10.1016/j.commatsci.2018.02.015 ↗
38. A new class of high strength high temperature Cobalt based γ–γ′ Co–Mo–Al alloys stabilized with Ta addition10.1016/j.actamat.2015.06.034 ↗
39. XRD studies of Co-Fe-Ti nanocrystalline intermetallics10.4028/www.scientific.net/MSF.442.109 ↗
40. Site preference of ternary alloying elements in Ni3Al: a first-principles study10.1016/j.actamat.2005.10.039 ↗
41. On the microstructural evolution and partitioning behavior of L12-structured γ′-based Co-Ti-W alloys upon Cr and Al alloying10.1016/j.intermet.2018.10.027 ↗
42. Elemental partitioning and site-occupancy in γ/γ′ forming Co-Ti-Mo and Co-Ti-Cr alloys10.1016/j.scriptamat.2018.05.041 ↗
43. Microstructures and properties of a novel γ′-strengthened multi-component CoNi-based wrought superalloy designed by CALPHAD method10.1016/j.msea.2020.139219 ↗
44. Effects of Cr and Al/W ratio on the microstructural stability, oxidation property and γ′ phase nano-hardness of multi-component Co–Ni-base superalloys10.1016/j.jallcom.2020.154182 ↗
45. Effects of Cr on the properties of multicomponent cobalt-based superalloys with ultra high γ' volume fraction10.1016/j.jallcom.2020.154790 ↗
46. Effects of alloying elements on relative phase stability and elastic properties of L12 Co3V from first-principles calculations10.1007/s10853-017-1549-9 ↗
47. First-principles study of point defects in Ni3Al10.1080/14786435.2013.838647 ↗
48. Thermodynamics of crystals and melting10.1063/1.1750497 ↗
49. A simplified method for calculating the debye temperature from elastic constants10.1016/0022-3697(63)90067-2 ↗
50. Structural, elastic, electronic and optical properties of zinc-blende MTe (M=Zn/Mg)10.3866/PKU.WHXB201303044 ↗
51. First-principles investigation of B2 partial disordered structure, martensitic transformation, elastic and magnetic properties of all-d-metal Ni-Mn-Ti Heusler alloys10.1016/j.jmst.2020.08.002 ↗
52. Effects of alloying elements on elastic properties of Ni3Al by first-principles calculations10.1016/j.intermet.2010.02.024 ↗
53. The development of γ-γ′ lamellar structures in a nickel-base superalloy during elevated temperature mechanical testing10.1007/BF02662398 ↗
54. Flow stress anomalies in γ/γ′ two-phase Co–Al–W-base alloys10.1016/j.scriptamat.2006.10.039 ↗
55. Plastic deformation behaviors and mechanical properties of advanced single crystalline CoNi-base superalloys10.1016/j.msea.2019.01.097 ↗
56. Enhanced microstructural stability of γ/γ′-strengthened Co-Ti-Mo-based alloys through Al additions10.1016/j.actamat.2021.117011 ↗
57. High-strength Co–Al–V-base superalloys strengthened by γ′-Co 3 (Al,V) with high solvus temperature10.1016/j.actamat.2019.03.013 ↗
58. Phase equilibria and microstructure on γ′ phase in Co-Ni-Al-W system10.2320/matertrans.MER2008073 ↗
59. Ostwald ripening in multicomponent alloys10.1016/j.actamat.2013.03.049 ↗
60. Phase-field modelling of as-cast microstructure evolution in nickel-based superalloys10.1016/j.actamat.2009.08.013 ↗
61. A comparative study of solidification features in nickel-base superalloys: microstructural evolution and microsegregation10.1016/0921-5093(91)90252-I ↗