journal article·2023-01

Hydrogen storage characteristics of Ti1.04Fe0.7Ni0.1Zr0.1Mn0.1Pr0.06 alloy treated by ball milling

Yaqin Li, Yanghuan Zhang, Hongwei Shang, Jinliang Gao, Wei Zhang, Lin Ju

Publisher page

Abstract

In order to enhance the hydrogen storage performances of TiFe alloy, the Ti 1.04Fe 0.7Ni 0.1Zr 0.1Mn 0.1Pr 0.06 alloy was prepared through using transition metals (Ni, Mn, Zr) partially substitute Fe and rare earth Pr partially substitute Ti. The microstructure of the alloy was further adjusted by ball milling for different time. The master alloy contained TiFe, Ti 2 Fe and Pr phases. Ball milling treatment led to the reduction of the particle size and grain size. The master alloy (M-0 sample) and the alloys with short-time ball milling treatment (M-0.5 and M-1 samples) absorbed hydrogen immediately at the first hydrogenation cycle at 423 K and 3 MPa H 2, while the alloys with long-time ball milling treatment (M-3 and M-5 samples) showed an incubation time. The M-0.5 sample not only presented the optimum activation property, but also showed the most outstanding hydriding/dehydriding kinetics and capacity. It achieved the saturated hydrogenation state within 2158 s. The hydrogenation capacity was 1.471, 1.626, 1.547, 1.485 and 1.417 wt% for the M-0, M-0.5, M-1, M-3 and M-5 samples at 313 K and 3 MPa H 2, respectively. In addition, ball milling treatment caused the decrease of cell volume of TiFe phase in the samples, which reduced the thermodynamic stability of the hydrides.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen Storage and Materials · Hybrid Renewable Energy Systems · Catalysis and Hydrodesulfurization Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (89)

Show source-provided references
1. Coaxial Ni3S2@CoMoS4/NiFeOOH nanorods for energy-saving water splitting and urea electrolysis10.1016/j.ijhydene.2021.04.195 ↗
2. Ammonia decomposition reaction to produce COx-free hydrogen using carbon supported cobalt catalysts in microwave heated reactor system10.1016/j.ijhydene.2020.01.124 ↗
3. Low-carbon hydrogen production via electron beam plasma methane pyrolysis: techno-economic analysis and carbon footprint assessment10.1016/j.ijhydene.2021.03.114 ↗
4. Membrane reactors for sustainable hydrogen production through steam reforming of hydrocarbons: a review10.1016/j.cep.2020.108148 ↗
5. V. Molkov, Fundamentals of Hydrogen Safety Engineering, Part I and Part II, 2012. Available from: www.bookboon.com (free download e-book).10.1016/B978-0-08-087872-0.00418-2 ↗
6. Hydrogen production for energy: an overview10.1016/j.ijhydene.2019.12.059 ↗
7. Hydrogen energy, economy and storage: review and recommendation10.1016/j.ijhydene.2019.04.068 ↗
8. Why can’t we just burn hydrogen? Challenges when changing fuels in an existing infrastructure10.1016/j.pecs.2021.100907 ↗
9. A review on the role, cost and value of hydrogen energy systems for deep decarbonization10.1016/j.rser.2018.11.010 ↗
10. Excellent hydrolysis performances of Mg3RE hydrides10.1016/j.ijhydene.2012.12.092 ↗
11. Advanced high-pressure metal hydride fabricated via Ti-Cr-Mn alloys for hybrid tank, Int. J. Hydrog
12. Metal hydride hydrogen storage tank for light fuel cell vehicle10.1016/j.ijhydene.2019.01.227 ↗
13. Wind energy utilization for hydrogen production in an underdeveloped country: an economic investigation10.1016/j.renene.2019.09.079 ↗
14. The role of hydrogen in the transition from a petroleum economy to a low-carbon society10.1016/j.ijhydene.2021.04.143 ↗
15. The role of hydrogen in the transition from a petroleum economy to a low-carbon society10.1016/j.ijhydene.2021.04.143 ↗
16. The production and application of hydrogen in steel industry10.1016/j.ijhydene.2020.12.123 ↗
17. Chapter four-nuclear hydrogen production, storage and hybridization of nuclear energy
18. Preparation, characterization and hydrogen storage studies of carbon nanotubes and their composites: a review10.1016/j.ijhydene.2019.12.055 ↗
19. Effect of LiH on hydrogen storage property of MgH210.1016/j.ijhydene.2014.02.131 ↗
20. Synthesis of MgH2 using autocatalytic effect of MgH210.1016/j.ijhydene.2019.01.163 ↗
21. Synergistic effect of TiF3@ graphene on the hydrogen storage properties of Mg-Al alloy10.1016/j.ijhydene.2017.11.148 ↗
22. Current research trends and perspectives on materials-based hydrogen storage solutions: a critical review10.1016/j.ijhydene.2016.11.195 ↗
23. Hydrogen storage in light-metal based systems: a review10.1016/j.jallcom.2020.154597 ↗
24. Review on effective parameters in electrochemical hydrogen storage10.1016/j.ijhydene.2020.10.003 ↗
25. Effects of adding Nd on the microstructure and dehydrogenation performance of Mg90Al10 alloy10.1016/j.matchar.2020.110795 ↗
26. Effects of adding nano-CeO2 powder on microstructure and hydrogen storage performances of mechanical alloyed Mg90Al10 alloy10.1016/j.ijhydene.2018.11.124 ↗
27. Explosion dynamics of hydrogen-air mixtures in a flat vessel filled with annular obstacles10.1016/j.fuel.2021.120835 ↗
28. High H2 uptake by alkali-doped carbon nanotubes under ambient pressure and moderate temperatures10.1126/science.285.5424.91 ↗
29. The activation and hydrogen storage characteristics of the cup-stacked carbon nanotubes10.1016/j.diamond.2019.107567 ↗
30. Characteristics of MOF, MWCNT and graphene containing materials for hydrogen storage: a review10.1016/j.jechem.2018.04.012 ↗
31. Application of dielectric barrier discharge plasma-assisted milling in energy storage materials-A review10.1016/j.jallcom.2016.08.179 ↗
32. Studies on 10kg alloy mass metal hydride based reactor for hydrogen storage10.1016/j.ijhydene.2020.11.091 ↗
33. A review on the current progress of metal hydrides material for solid-state hydrogen storage applications10.1016/j.ijhydene.2016.05.244 ↗
34. Hydrogen storage: recent improvements and industrial perspectives10.1016/j.ijhydene.2016.03.178 ↗
35. Development of hydrogen storage reactor using composite of metal hydride materials with ENG10.1016/j.ijhydene.2020.07.062 ↗
36. Improved reversible dehydrogenation properties of MgH2 by the synergetic effects of grapheme oxide-based porous carbon and TiCl310.1016/j.ijhydene.2018.02.195 ↗
37. Investigations on gaseous hydrogen storage performances and reactivation ability of as-cast TiFe1-xNix (x=0, 0.1, 0.2 and 0.4) alloys10.1016/j.ijhydene.2018.12.144 ↗
38. Formation and properties of iron titanium hydride10.1021/ic50131a042 ↗
39. Construction and operation of hydrogen energy utilization system for a zero emission building10.1016/j.ijhydene.2019.04.107 ↗
40. Outstanding shortening of the activation process stage for a TiFe-based hydrogen storage alloy10.1016/j.materresbull.2018.12.015 ↗
41. Mechanochemical synthesis and hydrogenation behavior of (TiFe)100-xNix alloys10.1016/j.jallcom.2019.04.339 ↗
42. Reactivation behaviour of TiFe hydride10.1016/0925-8388(94)90823-0 ↗
43. Initial oxidation of TiFe1-xMnx (x=0-0.3) by low dose exposures to H2O and O210.1016/j.jallcom.2014.04.196 ↗
44. Lattice dynamics of Fe0.5Ti0.510.1103/PhysRevB.27.955 ↗
45. Effects of Ce on the hydrogen storage properties of TiFe0.9Mn0.1 alloy10.1016/j.ijhydene.2017.01.194 ↗
46. Hydrogen storage properties of TixFe+y wt% La and its use in metal hydride hydrogen compressor10.1016/j.jallcom.2006.01.025 ↗
47. Structure and hydrogenation performances of as-cast Ti1.1-xRExFe0.8Mn0.2 (RE=Pr, Sm and Nd; x=0, 0.01) alloys10.1016/j.ijhydene.2018.08.046 ↗
48. Hydrogenation properties of Ti-Fe-Mn alloy with Cu and Y as additives10.1016/j.ijhydene.2016.09.037 ↗
49. Effects of Cu and Y substitution on hydrogen storage performance of TiFe0.86Mn0.1Y0.1-xCux10.1016/j.ijhydene.2017.04.247 ↗
50. Marcello Baricco, Substitutional effects in TiFe for hydrogen storage: a comprehensive review10.1039/D1MA00101A ↗
51. Effect of the second phase on the initiation of hydrogenation of TiFe1-xMx (M=Cr, Mn) alloys10.1016/0360-3199(94)90095-7 ↗
52. Microstructure and first hydrogenation properties of TiFe alloy with Zr and Mn as additives10.1016/j.ijhydene.2019.10.239 ↗
53. Hydrogenation improvement of TiFe by adding ZrMn210.1016/j.energy.2017.07.072 ↗
54. Microstructure and hydriding characteristics of FeTi alloys containing manganese10.1016/0022-5088(87)90567-4 ↗
55. Hydrogen storage properties of FeTi1.3+x wt% Mm (x=0.0, 1.5, 3.0, 4.5, 6.0) hydrogen storage alloys, Int. J. Hydrog
56. First hydrogenation enhancement in TiFe alloys for hydrogen storage doped with yttrium10.3390/met9020242 ↗
57. Hydrogenation characteristics of TiFe1-xPdx (0.05≤x≤0.30) alloys10.1016/S0925-8388(96)02925-8 ↗
58. Influence of the addition of vanadium on the hydrogenation properties of the compounds TiFe0.9Vx and TiFe0.8Mn0.1Vx (x=0, 0.05 and 0.1)10.1016/j.jallcom.2011.02.036 ↗
59. Hydrogenation properties of TiFe with Zr7Ni10 alloy as additive10.1016/j.jallcom.2015.02.104 ↗
60. Hydrogen solubility properties of Ti0.42Zr0.08Fe0.50 alloy10.1016/S0360-3199(98)00121-9 ↗
61. A study on crystal structure, bonding and hydriding properties of Ti-Fe-Ni intermetallics-behind substitution of iron by nickel10.1016/j.ijhydene.2012.02.047 ↗
62. Correlation of substitutional solid solution with hydrogenation properties of TiFe1-xMx (M=Ni, Co, Al) alloys10.1016/S0925-8388(99)00262-5 ↗
63. Effects of Co introduction on hydrogen storage properties of Ti-Fe-Mn alloys10.1016/j.ijhydene.2014.12.089 ↗
64. Hydrogenation properties of TiFe Doped with zirconium10.3390/ma8115423 ↗
65. Investigations on hydrogen storage performances and mechanisms of as-cast TiFe0.8-mNi0.2Com (m=0, 0.03, 0.05 and 0.1) alloys10.1016/j.ijhydene.2021.02.179 ↗
66. Amorphous and nanocrystalline Fe-Ti prepared by ball milling10.1557/JMR.1993.3059 ↗
67. Mechanism of activation of TiFe intermetallics for hydrogen storage by severe plastic deformation using high-pressure torsion10.1063/1.4823555 ↗
68. Hydrogen storage nanocrystalline TiFe intermetallic compound: Synthesis by mechanical alloying and compacting10.1016/j.ijhydene.2012.08.078 ↗
69. Hydrogenation of TiFe by high-energy ball milling10.1016/S0925-8388(00)00827-6 ↗
70. Activation of TiFe for hydrogen storage by plastic deformation using groove rolling and high-pressure torsion: Similarities and differences10.1016/j.ijhydene.2014.07.124 ↗
71. High-pressure torsion of TiFe intermetallics for activation of hydrogen storage at room temperature with heterogeneous nanostructure10.1016/j.ijhydene.2013.01.185 ↗
72. Hydrogen storage performance of TiFe after processing by ball milling10.1016/j.actamat.2014.12.052 ↗
73. Nanocrystalline metal hydrides10.1016/S0925-8388(96)02985-4 ↗
74. Effect of nickel alloying by using ball milling on the hydrogen absorption properties of TiFe10.1016/S0360-3199(98)00163-3 ↗
75. Milling effect on the microstructural and hydrogenation properties of TiFe0.9Mn0.1 alloy10.1016/j.powtec.2018.08.085 ↗
76. Investigation on gaseous and electrochemical hydrogen storage performances of as-cast and milled Ti1.1Fe0.9Ni0.1 and Ti1.09Mg0.01Fe0.9Ni0.1 alloys10.1016/j.ijhydene.2017.11.163 ↗
77. Hydrogen absorption of TiFe alloy synthesized by ball milling and post-annealing10.1016/j.jallcom.2006.12.063 ↗
78. An alternative route to produce easily activated nanocrystalline TiFe powder10.1016/j.ijhydene.2018.07.027 ↗
79. Hydrogen storage properties of Nb-based solid solution alloys with a BCC structure10.1016/j.jallcom.2019.153399 ↗
80. Hydrogen absorption properties of Ti-V-Fe alloys: Effect of Cr substitution10.1016/j.ijhydene.2007.06.022 ↗
81. Improved ball milling method for the synthesis of nanocrystalline TiFe compound ready to absorb hydrogen10.1016/j.ijhydene.2019.11.035 ↗
82. The influence of refractory metals on the hydrogen storage characteristics of FeTi-based alloys prepared by suspended droplet alloying10.1016/j.ijhydene.2020.05.216 ↗
83. A panoramic overview of hydrogen storage alloys from a gas reaction point of view10.1016/S0925-8388(99)00384-9 ↗
84. Hydrogen sorption peculiarities in FeTi-type Ti-Fe-V-Mn alloys10.1016/0925-8388(93)90443-Q ↗
85. Hydrogen storage properties of FeTi1+x and FeTi1+xOy flakes produced by splat quenching10.1016/0022-5088(83)90363-6 ↗
86. A new method of determining the thermodynamic parameters of metal hydride electrode materials10.1016/S0360-3199(97)00013-X ↗
87. ReaxFF(MgH) reactive force field for magnesium hydride systems10.1021/jp0460184 ↗
88. Thermodynamic changes in mechanochemically synthesized magnesium hydride nanoparticles10.1021/ja908398u ↗
89. Dissociation and sticking of H2 on Mg(0001), Ti(0001) and La(0001) surfaces10.1143/JPSJ.73.745 ↗