journal article·2022-12

Regulation of primary phase in Cu-Cr-Zr alloy and its effect on nano-structure and properties

Jinshui Chen, Xiangpeng Xiao, Chengjun Guo, Dawei Yuan, Hao Huang, Bin Yang

Publisher page

Abstract

In this study, Cu-0.8Cr-0.1Zr alloy was prepared by vacuum horizontal continuous casting method. The effect of different thermo-mechanical treatment processes on the properties was studied, and the microstructure evolution at different stages of thermo-mechanical treatment were observed by SEM, EBSD and (HR)TEM. The results showed that the optimal comprehensive performance of tensile strength (803 MPa) and conductivity (76% IACS) was obtained by three-stage drawing and thermal treatment (primary 43.75% drawing and solution treatment at 950 °C for 60 min + secondary 97.2% drawing and aging at 500 °C for 30 min + tertiary 75% drawing). Through the microstructure characterization, it was found that the morphology and distribution of the Cr-rich primary phase can be regulated by solution treatment, and inherited during the thermo-mechanical treatment. It acts as a nucleation point and hard point, thereby refining the grain and improving the strength of the alloy. Additionally, it reduces the number of solid solution atoms in the matrix and prevents the loss of conductivity. Furthermore, drawing with a large amount of deformation can produce a nano-lamellar structure with high temperature stability, and drawing after high temperature aging can induce substructure formation. The combination of nano-lamellar structure and substructure further improves the strength.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Composition design, phase transition and fabrication of copper alloys with high strength and electrical conductivity
2. Review of nano-phase effects in high strength and conductivity copper alloys10.1515/ntrev-2019-0034 ↗
3. High strength and high conductivity Cu alloys: a review10.1007/s11431-020-1633-8 ↗
4. Low cycle fatigue behavior of precipitation-strengthened Cu-Cr-Zr contact wires10.1016/j.ijfatigue.2020.105642 ↗
5. Grain refinement kinetics and strengthening mechanisms in Cu-0.3Cr-0.5Zr alloy subjected to intense plastic deformation10.1016/j.msea.2015.12.038 ↗
6. Microstructure evolution and properties of a Cu-Cr-Zr alloy with high strength and high conductivity10.1016/j.msea.2021.141464 ↗
7. Effect of thermomechanical processing on the microstructure and properties of a Cu-Fe-P alloy10.1007/s11665-014-1352-6 ↗
8. Suppressing spinodal decomposition by adding Co into Cu-Ni-Si alloy10.1016/j.jallcom.2015.11.103 ↗
9. Microstructure and properties of Cu-Cr-Zr alloy with columnar crystal structure processed by upward continuous casting10.1016/j.jallcom.2021.161700 ↗
10. Microstructure and bending properties of Cu-Cr-Zr alloy subjected to heat treatment and rolling10.1007/s11665-021-05833-x ↗
11. Correlation between microstructure and mechanical properties in the age-hardenable Cu-Cr-Zr alloy10.1016/j.jnucmat.2020.152775 ↗
12. Optimization of strength, ductility and electrical conductivity of Cu-Cr-Zr alloy by combining multi-route ECAP and aging10.1016/j.msea.2015.09.111 ↗
13. Refinement effect of C addition on the Cr phase in the as-cast Cu-Cr alloys10.1016/j.vacuum.2020.109485 ↗
14. Contribution of Zr to strength and grain refinement in Cu-Cr-Zr alloy10.1016/j.msea.2019.04.053 ↗
15. Study on the variation of properties of Cu-Cr-Zr alloy by different rolling and aging sequence10.1016/j.msea.2020.140413 ↗
16. Optimizing strength and electrical conductivity of Cu-Cr-Zr alloy by two-stage aging treatment10.1016/j.matlet.2022.131937 ↗
17. Improved compromise between the electrical conductivity and hardness of the thermo-mechanically treated CuCrZr alloy10.1016/j.msea.2018.03.004 ↗
18. Structure and properties of ultra-fine grain Cu-Cr-Zr alloy produced by equal-channel angular pressing10.1016/S1359-6454(01)00437-2 ↗
19. A multiscale architectured CuCrZr alloy with high strength, electrical conductivity and thermal stability10.1016/j.jallcom.2017.11.309 ↗
20. A dual heterogeneous laminated microstructure design for improving the mechanical properties and electrical conductivity of copper alloys10.1016/j.matchar.2022.111878 ↗
21. Microstructural, mechanical and tribological properties of ultrafine-grained Cu-Cr-Zr alloy processed by high pressure torsion10.1016/j.jallcom.2019.152675 ↗
22. Enhanced electrical, mechanical and tribological properties of Cu-Cr-Zr alloys by continuous extrusion forming and subsequent aging treatment10.1016/j.jmst.2021.10.012 ↗
23. Preparation of Cu-Cr-Zr alloy by selective laser melting: role of scanning parameters on densification, microstructure and mechanical properties10.1016/j.msea.2022.142740 ↗
24. Selective laser melting of Cu-Cr-Zr copper alloy: parameter optimization, microstructure and mechanical properties10.1016/j.jallcom.2020.154350 ↗
25. A high strength and high electrical conductivity Cu-Cr-Zr alloy fabricated by cryogenic friction stir processing and subsequent annealing treatment10.1016/j.msea.2019.04.004 ↗
26. Effect of laser shock peening on micro-structure and mechanical properties of friction stir welded CuCrZr sheets10.1016/j.msea.2021.142238 ↗
27. Microstructure evolution of Cu-0.2Mg alloy during continuous extrusion process10.1557/jmr.2015.237 ↗
28. Investigations on voids formation in Cu-Mg alloy during continuous extrusion10.1007/s11837-017-2469-5 ↗
29. Microstructure and property of high cleanliness K418 superalloy by vacuum horizontal continuous casting
30. Microstructure and properties of vacuum horizontal continuous casting AZ31 magnesium alloys
31. Evolution of microstructure and properties of Cu-4.5 wt% Ag alloy prepared by vacuum horizontal continuous casting in solid solution and aging treatment10.1088/2053-1591/abd217 ↗
32. Improved tensile strength and electrical conductivity in Cu-Cr-Zr alloys by controlling the precipitation behavior through severe warm rolling10.1007/s10853-020-04849-3 ↗
33. A high strength and high electrical conductivity Cu-Cr-Zr alloy fabricated by cryorolling and intermediate aging treatment10.1016/j.msea.2016.10.087 ↗
34. Optimization of the balance between high strength and high electrical conductivity in CuCrZr alloys through two-step cryorolling and aging10.1016/j.jallcom.2018.09.040 ↗
35. A high strength and high electrical conductivity bulk CuCrZr alloy with nanotwins10.1016/j.scriptamat.2014.11.032 ↗
36. Nanostructures and nanoprecipitates induce high strength and high electrical conductivity in a CuCrZr alloy10.1016/j.jmst.2019.12.022 ↗
37. Microstructures and mechanical properties of the novel CuCrZrFeTiY alloy for fusion reactor10.1016/j.jnucmat.2020.152063 ↗
38. Effect of rolling and aging processes on microstructure and properties of Cu-Cr-Zr alloy10.1016/j.msea.2017.05.114 ↗
39. Heterogeneous microstructure enables a synergy of strength, ductility and electrical conductivity in copper alloys10.1016/j.jallcom.2022.163646 ↗
40. Effects of minor rare earths on the microstructure and properties of Cu-Cr-Zr alloy10.1016/j.jallcom.2020.155762 ↗
41. The phase transformation and strengthening of a Cu-0.71 wt% Cr alloy10.1016/j.jallcom.2017.03.069 ↗
42. Atomic scale investigation of Cr precipitation in copper10.1016/j.actamat.2012.01.038 ↗
43. Ageing characteristic of Cu-Cr in-situ composite10.1023/A:1004310700846 ↗
44. Hirth · 1982 · 221
45. Effects of Si addition on properties and microstructure of CuCrZr alloy10.1016/j.jallcom.2022.164277 ↗
46. Effect of Zr on as-cast microstructure and properties of Cu-Cr alloy10.1016/j.vacuum.2017.12.011 ↗
47. Optimizing the strength, ductility and electrical conductivity of a Cu-Cr-Zr alloy by rotary swaging and aging treatment10.1016/j.msea.2019.01.002 ↗
48. On the influence of temperature on the electric conducting-power of alloys
49. Microstructure and properties of a Cu-Ni-Sn alloy treated by two-stage thermomechanical processing10.1007/s11837-019-03606-5 ↗
50. Microstructure and properties of high-strength Cu-Ni-Si-(Ti) alloys10.1007/s12598-020-01699-5 ↗
51. Hall-Petch relationship for austenitic stainless steels processed by large strain warm rolling10.1016/j.actamat.2017.06.060 ↗
52. Strength and ductility of heavily drawn bundled Cu-Nb filamentary microcomposite wires with various Nb contents10.1007/s11661-000-0191-2 ↗