journal article·2022-10

A large compressive recoverable strain induced by heterogeneous microstructure in a Ni50.6Ti49.4 shape memory alloy via laser powder bed fusion and subsequent aging treatment

Chenglong Ma, Dongdong Gu, Rossitza Setchi, Donghua Dai, Meiping Wu, Shuai Ma, Xiaojin Miao

Publisher page

Abstract

Laser induced highly metastable microstructure provides the possibility for the tunable precipitation behavior and mechanical/functional properties via direct aging treatment. In this paper, Ni-rich NiTi-based samples were fabricated by laser powder bed fusion (LPBF) and then were directly aged for different aging times that spanning three time-scales (10 min-100 h). The results showed that through the aging treatment, a heterogeneous microstructure consisting of Ti4Ni2Ox nanoparticles, nanoscale Ni-rich precipitates, dislocation structures, and martensitic twin variants formed in the matrix. Due to the change in the elastic strain field, the short time aging treatment tended to induce (001) compound twins, while the long time aging assisted in the formation of< 011 > type II twins. The temperature-induced and deformation-induced phase transformation behavior were further studied. With the progress of precipitates, it was found that a rapid evolution from a single-stage phase transformation to a multi-stage one occurred. During the cyclic compression, the sample aged for 1 h showed the most excellent superelasticity with initial recoverable strain of 0.089 and steady recoverable strain of 0.087, as well as good cyclic stability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Physical metallurgy of Ti–Ni-based shape memory alloys10.1016/j.pmatsci.2004.10.001 ↗
2. Effective parameters on the final properties of NiTi-based alloys manufactured by powder metallurgy methods: a review
3. Manufacturing and processing of NiTi implants: a review10.1016/j.pmatsci.2011.11.001 ↗
4. Selective growth of Ni4Ti3 precipitate variants induced by complicated cyclic stress during laser additive manufacturing of NiTi-based composites10.1016/j.matchar.2018.04.004 ↗
5. Effect of low-temperature phase changes on mechanical properties of alloys near composition TiNi10.1063/1.1729603 ↗
6. Fabrication of NiTi alloy: a review
7. Precipitation processes in near-equiatomic TiNi shape memory alloys10.1007/BF02650086 ↗
8. The mechanism of multistage martensitic transformations in aged Ni-rich NiTi shape memory alloys10.1016/S1359-6454(01)00385-8 ↗
9. Effect of aging treatment on the transformation behavior of Ti-50.9 at% Ni alloy10.1016/j.actamat.2007.10.020 ↗
10. Effect of aging treatment on the deformation behavior of Ti-50.9 at% Ni alloy10.1016/j.actamat.2009.06.059 ↗
11. Material-structure-performance integrated laser-metal additive manufacturing10.1126/science.abg1487 ↗
12. Selective laser melting additive manufacturing of Cancer pagurus’s claw inspired bionic structures with high strength and toughness10.1016/j.apsusc.2018.11.026 ↗
13. The development of TiNi-based negative Poisson’s ratio structure using selective laser melting10.1016/j.actamat.2015.12.017 ↗
14. Additive manufacturing of bio-inspired multi-scale hierarchically strengthened lattice structures10.1016/j.ijmachtools.2021.103764 ↗
15. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
16. The microstructure of a selective laser melting (SLM)-fabricated NiTi shape memory alloy with superior tensile property and shape memory recoverability. Appl
17. Achieving superelasticity in additively manufactured NiTi in compression without post-process heat treatment10.1038/s41598-018-36641-4 ↗
18. Spatial characterization of the thermal-induced phase transformation throughout as-deposited additive manufactured NiTi bulk builds10.1016/j.scriptamat.2015.01.018 ↗
19. Texture and anisotropy in selective laser melting of NiTi alloy10.1016/j.msea.2015.10.032 ↗
20. Texture, aging, and superelasticity of selective laser melting fabricated Ni-rich NiTi alloys10.1016/j.msea.2017.01.008 ↗
21. The influence of heat treatment on the thermomechanical response of Ni-rich NiTi alloys manufactured by selective laser melting10.1016/j.jallcom.2016.03.161 ↗
22. Effect of heat treatment on repetitively scanned SLM NiTi shape memory alloy10.3390/ma12010077 ↗
23. Stable tensile recovery strain induced by a Ni4Ti3 nanoprecipitate in a Ni50.4Ti49.6 shape memory alloy fabricated via selective laser melting10.1016/j.actamat.2021.117261 ↗
24. Influence of heat treatment on the mechanical and electrical characteristics of Ni0.5Ti0.5 alloy prepared by electron-beam melting10.1016/j.physb.2013.03.034 ↗
25. Mechanical properties of Ti–(∼49 at%) Ni shape memory alloy, part II: Effect of aging treatment10.1016/j.msea.2012.10.023 ↗
26. Age-induced four-stage transformation in Ni-rich NiTi shape memory alloys10.1016/j.jallcom.2007.04.006 ↗
27. Hardening behavior and phase decomposition in very Ni-rich nitinol alloys10.1016/j.msea.2015.04.079 ↗
28. Energetics of twinning in martensitic NiTi10.1016/j.actamat.2011.05.063 ↗
29. Microstructure and properties of equiatomic Ti-Ni alloy fabricated by selective laser melting10.1016/j.msea.2019.138586 ↗
30. Simultaneous enhancement of mechanical and shape memory properties by heat-treatment homogenization of Ti2Ni precipitates in TiNi shape memory alloy fabricated by selective laser melting10.1016/j.jmst.2021.06.019 ↗
31. Numerical simulation of multi-component evaporation during selective electron beam melting of TiAl10.1016/j.jmatprotec.2017.04.016 ↗
32. Intermetallic Ti2Ni/TiNi nanocomposite by rapid solidification10.1016/0956-7151(94)90289-5 ↗
33. Reactions of TiNi with oxygen10.1023/A:1016020800727 ↗
34. Fatigue-resistant high-performance elastocaloric materials via additive manufacturing10.1126/science.aax7616 ↗
35. Origin of abnormal multi-stage martensitic transformation behavior in aged Ni-rich Ti–Ni shape memory alloys10.1016/j.actamat.2004.06.002 ↗
36. Supersaturated vacancies andvacancy complexes in rapidly solidified B2 aluminide ribbons10.1016/j.msea.2006.07.030 ↗
37. On dislocation formation by vacancy condensation10.1080/14786436008241199 ↗
38. The mechanism of repeated precipitated on dislocations10.1016/0001-6160(74)90127-8 ↗
39. On the multiplication of dislocations during martensitic transformations in NiTi shape memory alloys10.1016/j.actamat.2009.11.028 ↗
40. Plastic deformation of NiTi shape memory alloys10.1016/j.actamat.2012.09.023 ↗
41. Effect of internal strain on martensitic transformations in NiTi shape memory alloys10.2320/matertrans.MB201012 ↗
42. Effect of Ni4Ti3 precipitation on martensitic transformation in Ti-Ni10.1016/j.actamat.2010.08.033 ↗
43. Additively manufacturing enabled hierarchical NiTi-based shape memory alloys with high strength and toughness10.1080/17452759.2021.1892389 ↗
44. Martensitic phase transformations in nanocrystalline NiTi studied by TEM10.1016/j.actamat.2003.08.036 ↗
45. Electron microscopy studies of the martensitic transformation in an aged Ti-51at%Ni shape memory alloy10.1016/0026-0800(88)90025-0 ↗
46. Nucleation and self-accommodation of the R-phase in Ti-Ni alloys10.2320/matertrans1989.33.271 ↗
47. Salje · 1993
48. On the effects of selective laser melting process parameters on microstructure and thermomechanical response of Ni-rich NiTi10.1016/j.actamat.2017.10.072 ↗
49. memory response of porous NiTi shape memory alloys fabricated by selective laser melting10.1007/s10856-018-6044-6 ↗
50. Effect of hatch spacing and laser power on microstructure, texture, and thermomechanical properties of laser powder bed fusion (L-PBF) additively manufactured NiTi
51. Structural and functional properties of NiTi shape memory alloys produced by selective laser melting. innovative developments in virtual and physical prototyping
52. heterogeneous transformation and recoverable behavior of laser powder bed fused Ni-rich Ni50.6Ti49.4 alloys without post treatment10.1016/j.jallcom.2022.164212 ↗
53. A revisit to atomistic rationale for slip in shape memory alloys10.1016/j.pmatsci.2016.10.002 ↗