journal article·2022-07

Zirconia-high entropy alloys joints for biomedical applications: The role of Ag-based fillers on interfacial reactivity

S. Gambaro, F. Valenza, M.L. Muolo, A. Passerone, P. Riani, G. Cacciamani

Publisher page

Abstract

Metal-ceramic joints represent an important choice for biomedical devices, in orthopaedic field or as micro-stimulators. ZrO2-Ag-HEA joint is here proposed to replace the currently used Ti6Al4V by new Ti-based refractory HEAs. To evaluate the system reactivity, wettability of ZrO2 by different Ag-based alloys at 1000 °C and their interfacial layers were studied, for the first time. Interpretation and discussion of systems reactivity were supported by thermodynamic calculations, according to the CALPHAD approach and the ad-hoc Ag-Ti-Zr-O thermodynamic database, implemented in this work. A good wettability was reached at 1000 °C adding Ti to Ag: Ag-4Ti and Ag-8Ti reached contact angles of 81-85°. Ag-4Ti-2Zr showed the best wettability (77°) and the most complex interfacial microstructure. A continuous hcp (Ti,O), ~ 20 µm thick, promoted the wettability of Ag-4Ti and Ag-8Ti. In both cases, AgTi was the only intermetallic compound found in the bulk. Ag-4Ti-2Zr formed a thicker interfacial layer of hcp-(Ti,Zr,O) + bcc-(Ti,Zr) + a less compact Ag(Ti,Zr)2 layer. Here, a low amount of Ag(Ti,Zr) and Ag(Ti,Zr)2 was found in the Ag matrix. Since Ag resulted a promising filler to braze Ti-rich substrates to ZrO2 at 1000 °C, preliminary HEA-Ag-ZrO2 joints were characterized. A sound and defects-free interface was observed, with a first layer, mainly formed by Ag, Ti and Zr (HV ~ 600), and a Ag-based interface (HV ~ 250), extending until the HEA. Further works envisage mechanical and electrochemical evaluations of the system to pave the way for the production of novel HEA-Ag-ZrO2 joints to be used in biomedical applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Zirconia-based biomaterials for hard tissue
2. Zirconia to Ti‐6Al‐4V braze joint for implantable biomedical device10.1002/jbm.b.30161 ↗
3. Second-generation microstimulator10.1046/j.1525-1594.2002.06938.x ↗
4. Study of the stability under in vitro physiological conditions of surface silanized equimolar HfNbTaTiZr high-entropy alloy: a first step toward bio-implant applications10.1016/j.surfcoat.2020.125374 ↗
5. Microstructure of equiatomic and non-equiatomic Ti-Nb-Ta-Zr-Mo high-entropy alloys for metallic biomaterials10.1016/j.jallcom.2018.04.082 ↗
6. TiZrNbTaMo high-entropy alloy designed for orthopedic implants: as-cast microstructure and mechanical properties
7. Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy10.1016/j.jallcom.2011.02.171 ↗
8. Formation, structure and properties of biocompatible TiZrHfNbTa high-entropy alloys10.1080/21663831.2019.1584592 ↗
9. Microstructural, mechanical and electrochemical characterization of TiZrTaHfNb and Ti1.5ZrTa0.5Hf0.5Nb0.5 refractory high-entropy alloys for biomedical applications10.1016/j.intermet.2019.106572 ↗
10. Bio-corrosion behavior and in vitro biocompatibility of equimolar TiZrHfNbTa high-entropy alloy10.1016/j.intermet.2020.106845 ↗
11. Novel TiNbTaZrMo high-entropy alloys for metallic biomaterials10.1016/j.scriptamat.2019.07.011 ↗
12. Biocompatibility properties of ZrO2 ceramics and ZrO2-TiN composites10.4028/www.scientific.net/KEM.396-398.51 ↗
13. Investigation of interaction of metal melts and zirconia10.1007/s10853-005-1928-5 ↗
14. Adhesion at metal–ZrO2 interfaces10.1016/j.surfrep.2006.03.002 ↗
15. Wettability, reactivity and interfaces in the Gd/TiO2 system10.2298/JMMB170815045T ↗
16. Brazing of zirconia with AgCuTi and SnAgTi active filler metals10.1007/s11661-000-0169-0 ↗
17. Wettability and interfacial reaction of alumina and zirconia by reactive silver-indium base alloy at mid-temperatures10.1007/BF01191971 ↗
18. Reactive wetting and interfacial characterization of ZrO2 by SnAgCu-Ti alloy10.1016/j.ceramint.2018.12.163 ↗
19. Wetting and interfacial behavior of Sn–Ti alloys on zirconia10.1007/s10853-018-2829-8 ↗
20. Microstructural evolution and bonding mechanisms of the brazed Ti/ZrO2 joint using an Ag68.8Cu26.7Ti4.5 interlayer at 900°C10.1557/jmr.2014.30 ↗
21. Microstructure and properties of ZrO2 ceramic and Ti-6A–4V alloy vacuum brazed by Ti-28Ni filler metal10.26628/wtr.v91i10.1076 ↗
22. Joining of zirconia using zirconium-based alloys10.1007/BF00543935 ↗
23. Wetting and interfacial reactivity of Ni–Al alloys with Al2O3 and ZrO210.1007/s10853-021-05769-6 ↗
24. Wettability of zirconium diboride ceramics by Ag, Cu and their alloys with Zr10.1016/S1359-6462(02)00361-5 ↗
25. Wetting and spreading of liquid metals on ZrB2-based ceramics10.1007/s10853-005-1948-1 ↗
26. Microstructure and shear strength of brazing high entropy TiZrHfNbMo alloy and Si3N4 ceramics joints
27. Experimental study and thermodynamic assessment of the Ag–Ti system10.1016/j.calphad.2005.09.002 ↗
28. Thermodynamic assessment of the Ag-Zr and Cu-Zr binary systems10.1016/j.calphad.2016.08.001 ↗
29. Pearson’s Crystal Data: Crystal structure database for inorganic compounds, Release 2020, Eds: Pierre Villars and Karin Cenzual. ASM International, & Material Phases Data System (MPDS), Switzerland & National Institute for Materials Science (NIMS), Japan, 2020.
30. Wetting and interfacial phenomena in relation to joining of alumina via Co/Nb/Co interlayers10.1016/j.jeurceramsoc.2012.10.009 ↗
31. An automatic technique for measuring the surface tension of liquid metals10.1080/02619180.1989.11753417 ↗
32. High-temperature wettability measurements in metal/ceramic systems – some methodological issues10.1016/j.cossms.2006.07.007 ↗
33. Measurement of contact angle and work of adhesion at high temperature10.1007/s10853-005-1945-4 ↗
34. First-principles calculations and CALPHAD modeling of thermodynamics10.1007/s11669-009-9570-6 ↗
35. Thermodynamic assessment of the Ti-Zr system and calculation of the Nb-Ti-Zr phase diagram10.1016/0925-8388(94)90019-1 ↗
36. Thermodynamic assessment of the silver–oxygen system10.1111/j.1151-2916.1997.tb03232.x ↗
37. Experimental investigation of phase relations and thermodynamic properties in the ZrO2–TiO2 system10.1111/jace.15176 ↗
38. Phase equilibria and thermodynamic properties of the ZrO2-GdO1.5-YO1.5 system10.1007/s11669-005-0004-9 ↗
39. Determination of isothermal section of Ag-Ti-Zr ternary system at 1023K10.1007/s11771-007-0142-9 ↗
40. High-temperature-reactivity of Al–Ti alloys in contact with SiC10.1016/j.jallcom.2019.152715 ↗
41. Wettability of SiC and graphite by Co-Ta alloys: evaluation of the reactivity supported by thermodynamic calculations10.1007/s10853-017-1448-0 ↗
42. Wettability of some metals against zirconia ceramics10.1007/BF01729384 ↗
43. Active metal brazing of zirconia10.1016/S1359-6454(00)00256-1 ↗
44. Wettability of transparent YAG (Y3Al5O12) by molten Ag–Cu–Ti alloys10.1016/j.jeurceramsoc.2015.03.036 ↗
45. N. Eustathopoulos, M.G. Nicholas, B. Dreve. Wettability at high temperatures. Pergamon materials series, Oxford; 1999.
46. Aging behavior of the HfNbTaTiZr high entropy alloy10.1016/j.matlet.2017.09.094 ↗
47. An experimental investigation of the deformed zone associated with indentation hardness impressions10.1016/0022-5096(57)90056-X ↗