Microstructure evolution behavior and mechanical mechanisms in a near α-Zr alloy by cold rolling
Source abstract
Abstract
The effect of reduction on microstructure evolution and mechanical properties in a near α-Zr alloy (Zr0.5Be, wt%) has been studied in detail during cold rolling. The results indicate that the strength of (002)α texture increases gradually with the increase of reduction, which can be attributed to the activation of base slip of α phase under high stress concentration. In the process of cold rolling reduction from 0% to 70%, deformation mode of the α-laths changes from rigid rotation along the RD direction to plastic strain gradually. Microscopic analysis results show that the dislocation slip dominates the plastic behavior of the alloy and the evolution path of the microstructure can be described as: (I) the stage of increasing dislocation density , (II) the stage of dislocation wall and dislocation cell formation, (III) the stage of subgrain formation, and (IV) the stage of nanocrystalline formation. Also, as the reduction increases from 0% to 70%, the tensile strength increases while the fracture elongation decreases. The sample subjected to 70% reduction can display the highest ultimate tensile strength (~ 930 MPa) and retain a fracture elongation of 8.6%. The combined effects of fine grain strengthening, dislocation strengthening and strain hardening play a leading role in the increase of strength and decrease of fracture elongation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Microstructure and mechanical properties of novel Zr–Al–V alloys processed by hot rolling10.1016/j.intermet.2019.106639 ↗
2. Evolution of microstructure, mechanical properties and corrosion behaviors using cooling rate regulation in a novel ZrTi-based alloy10.1016/j.jmrt.2020.01.084 ↗
3. Effect of Ag substitution for Ti on glass-forming ability, thermal stability and mechanical properties of Zr-based bulk metallic glasses10.1016/j.msea.2018.12.123 ↗
4. Microstructure and microhardness of a novel TiZrAlV alloy by laser gas nitriding at different laser powers10.1007/s12598-019-01362-8 ↗
5. Effects of synchronous rolling on microstructure, hardness, and wear resistance of laser multilayer cladding10.1007/s11665-018-3286-x ↗
6. Retention of metastable β phase in a two-phase quaternary zirconium alloy10.1016/j.matdes.2018.07.021 ↗
7. Influence of beryllium addition on the microstructural evolution and mechanical properties of Zr alloys10.1016/j.matdes.2014.10.014 ↗
8. Investigating the structure-property correlation of a novel Zirconium alloy by annealing treatment10.1016/j.msea.2016.09.074 ↗
9. Study of microstructure evolution and strengthening mechanisms in novel ZrBeAl alloys10.1016/j.jallcom.2016.07.310 ↗
10. Microstructure and mechanical properties of ZrBe alloys processed by hot rolling10.1016/j.msea.2016.05.017 ↗
11. Evolution of β phase and mechanical mechanisms in an α-type Zr alloy processed by rolling at different temperatures10.1016/j.matchar.2021.110873 ↗
12. A review on high-strength titanium alloys: microstructure, strengthening, and properties10.1002/adem.201801359 ↗
13. Texture development and mechanical behavior of Zircaloy-4 alloy plates fabricated by cold rolling and annealing10.1016/j.msea.2021.140846 ↗
14. Microstructural and textural evolution of commercially pure Zr sheet rolled at room and liquid nitrogen temperatures10.1016/j.matdes.2015.06.088 ↗
15. Effect of strain rate on microstructure evolutions and mechanical properties of cryorolled Zr upon annealing10.1016/j.matlet.2011.08.100 ↗
16. Effect of cold rolling on microstructure and mechanical properties of pure Zr10.1016/j.msea.2012.07.056 ↗
17. Review on superior strength and enhanced ductility of metallic nanomaterials10.1016/j.pmatsci.2018.02.002 ↗
18. Engineering bulk, layered, multi-component nanostructures with high energy density10.1002/smll.201800619 ↗
19. Nanocrystallization of pure Zr via room temperature rolling deformation10.1016/j.jallcom.2019.152955 ↗
20. Effect of severe plastic deformation by high-pressure torsion at different temperatures and subsequent annealing on structural and phase transformations in Zr-2.5%Nb alloy10.1016/j.jallcom.2021.158874 ↗
21. In situ quantitative study of plastic strain-induced phase transformations under high pressure: example for ultra-pure Zr10.1016/j.actamat.2020.06.015 ↗
22. Bulk texture evolution of nanolamellar Zr–Nb composites processed via accumulative roll bonding10.1016/j.actamat.2015.03.020 ↗
23. Equal channel angular sheet extrusion (ECASE) produces twinning heterogeneity in commercially pure titanium10.1016/j.matchar.2021.111460 ↗
24. High tensile ductility in a nanostructured metal10.1038/nature01133 ↗
25. Synthesis of bulk nanostructured Ni, Ti and Zr by repeated cold-rolling10.1016/j.scriptamat.2004.11.034 ↗
26. Cold rolling improves the fracture toughness of a Zr-based bulk metallic glass10.1016/j.jallcom.2016.10.134 ↗
27. Effect of cold rolling on compressive and tensile mechanical properties of Zr52.5Ti5Cu18Ni14.5Al10 bulk metallic glass10.1016/j.jallcom.2011.01.022 ↗
28. Grain refinement and phase transition of commercial pure zirconium processed by cold rolling10.1016/j.matchar.2017.04.037 ↗
29. Microstructural and textural differences between rolled Zr702 and Zr-2.5Nb alloys: The role played by preexisting β phase10.1016/j.matchemphys.2020.124026 ↗
30. Microstructural evolution and twinning behavior of a cold-rolled Zr70Ti30 alloy10.1016/j.jallcom.2019.01.081 ↗
31. Dry sliding behavior of a TiZr-based alloy under air and vacuum conditions10.1007/s11665-019-04100-4 ↗
32. Microstructure, mechanical properties and biocompatibility of novel Ti-20Zr-xMo alloys10.1016/j.jallcom.2021.161478 ↗
33. The effect of Zr addition on the microstructure evolution and mechanical properties of hot-rolled TiAlNbZr alloy10.1016/j.msea.2021.142114 ↗
34. Development of thermomechanical processing method to enhance twinning in commercially pure Zr10.1016/j.scriptamat.2009.03.050 ↗
35. Anisotropic behavior and rupture of hydrided ZIRCALOY-4 sheets10.1007/s11661-000-0010-9 ↗
36. Basal slip in zirconium10.1016/0001-6160(73)90213-7 ↗
37. Size–strain study of NiO nanoparticles by X-ray powder diffraction line broadening10.1016/j.matlet.2011.12.046 ↗
38. Effects of cold deformation on microstructure and mechanical properties of Ti-35Nb-9Zr-6Mo-4Sn alloy for biomedical applications10.1016/j.msea.2013.03.032 ↗
39. Microstructure, texture evolution and mechanical properties of cold rolled Ti-32.5Nb-6.8Zr-2.7Sn biomedical beta titanium alloy10.1016/j.jmst.2017.04.017 ↗
40. Microstructure and mechanical properties of novel ZrB2-reinforced zirconium alloys10.1016/j.msea.2015.03.105 ↗
41. Explaining absence of texture development in cold rolled two-phase Zr-2.5wt%Nb alloy10.1016/S1359-6454(02)00442-1 ↗
42. Strong crystal size effect on deformation twinning10.1038/nature08692 ↗
43. Microstructural and textural characterization of Zircaloy-4 processed by rolling at different temperatures10.1016/j.matchar.2017.02.020 ↗
44. High-pressure torsion of pure metals: influence of atomic bond parameters and stacking fault energy on grain size and correlation with hardness10.1016/j.actamat.2011.07.046 ↗
45. On the mechanisms of dynamic recovery10.1016/S1359-6462(02)00235-X ↗
46. Bimorphic microstructure in Ti-6Al-4V alloy manipulated by spark plasma sintering and insitu press forging10.1016/j.scriptamat.2020.10.035 ↗