journal article·2022-05

High rate and stable capacity performance of 2D LiMn1.5Ni0.5O4 nanoplates cathode with ultra-long cycle stability

N. Palaniyandy, M.V. Reddy, K. Zaghib, M.A. Kebede, K. Raju, R.M. Modibedi, M.K. Mathe, K.P. Abhilash, S. Balamuralikrishnan

Publisher page

Abstract

Typically, the high electrochemical performance of cathode materials is achieved by fine-tuning the surface morphology and particle size of the nano-electrode materials. Two-dimensional (2D) nanomaterials like nanoplates show astounding advantages of high surface area and shorter diffusion path-length, inducing improved Li-ion kinetics compared to bulk and 1D cathodes. This study reports the fabrication of 2D-nanoplates of LiMn 1.5Ni 0.5O 4 via the solid-state method using α-MnO 2 nanorods prepared from EMD, as a highly stable and long-cycle life cathode for lithium-ion battery (LIBs) applications. The fabricated 2D-LMNO nanoplates delivered an exceptional specific capacity of 88 mAh g −1 at a high current rate of 1 C and 98% retention of its initial capacity upon 1000 consecutive cycles. The nanoplates rendered a specific capacity of 77 mAh g −1 even at a high current rate of 7 C. The aligned LMNO stacked nanoplates with exposed {111} facets, and large Mn 4+ concentration revealed high lithium-ion coefficient, decreased Mn dissolution, and high interfacial stability, which resulted in enhanced cycle stability and rate capability. The remarkable electrochemical performance of the LMNO cathode was attributed to its unique 2D-nanoplates structure, which is favourable for accommodating volume changes during the repeated insertion and de-insertion of lithium ions.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (75)

Show source-provided references
1. Julien · 2016
2. Metal oxides and oxysalts as anode materials for Li-ion batteries10.1021/cr3001884 ↗
3. Brief history of early lithium-battery development10.3390/ma13081884 ↗
4. Review on electrode-electrolyte solution interactions, related to cathode materials for Li-ion batteries10.1016/j.jpowsour.2006.10.025 ↗
5. Comparative issues of cathode materials for Li-ion batteries10.3390/inorganics2010132 ↗
6. High performance 5 V LiNi0.5Mn1.5O4 spinel cathode materials synthesised by an improved solid-state method10.1016/j.jallcom.2015.08.066 ↗
7. Structural fatigue in spinel electrodes in high voltage (4 V) Li/LixMn2O4 cells10.1149/1.1390617 ↗
8. Preparation, temperature-dependent structural, molecular dynamics simulations studies and electrochemical properties of LiFePO410.1016/j.materresbull.2015.02.019 ↗
9. Layered, spinel, olivine, and silicate as cathode materials for lithium-ion battery
10. High rate capability of 5 V LiNi0.5Mn1.5O4 cathode material synthesised via a microwave assist method10.1016/j.jallcom.2016.10.186 ↗
11. Comparison of Li/Ni antisite defects in Fd-3m and P4332 nanostructured LiNi0.5Mn1.5O4 electrode for Li-ion batteries10.1016/j.electacta.2016.06.124 ↗
12. Improved electrochemical performance of spinel LiMn1.5Ni0.5O4 through MgF2 nano-coating10.1039/C5NR03564C ↗
13. Enhanced cyclic stability at elevated temperature of spinel LiNi0.5Mn1.5O4 by Li4Ti5O12 coating as cathode material for high voltage lithium-ion batteries10.1016/j.ceramint.2018.11.209 ↗
14. Effect of lithium and fluorine doping on the electrochemical and thermal stability of LiNi0.5Mn1.5O4 spinel cathode material10.1016/j.jallcom.2015.03.114 ↗
15. Improved cycling performance of 5 V spinel LiMn1.5Ni0.5O4 by amorphous FePO4 coating10.1016/j.jpowsour.2012.07.058 ↗
16. Microwave-assisted synthesis of high-voltage nanostructured LiMn1.5Ni0.5O4 spinel: tuning the Mn3+ content and electrochemical performance10.1021/am401894t ↗
17. Enhancing the electrochemical performances of LiNi0.5Mn1.5O4 by Co3O4 surface coating10.1016/j.jallcom.2018.05.245 ↗
18. Preparation of Li(Ni0.5Mn1.5)O4 by polymer precursor method and its electrochemical properties10.1016/j.electacta.2011.12.029 ↗
19. Kinetics study of the 5 V spinel cathode LiMn1.5Ni0.5O4 before and after surface modifications10.1149/1.3206590 ↗
20. Comparative studies of the phase evolution in M-doped LixMn1.5Ni0.5O4 (M = Co, Al, Cu, and Mg) by in-situ X-ray diffraction10.1016/j.jpowsour.2014.03.122 ↗
21. Tailoring high-voltage and high-performance LiNi0.5Mn1.5O4 cathode material for high energy lithium-ion batteries10.1016/j.jpowsour.2015.10.010 ↗
22. Role of oxygen vacancies on the performance of Li[Ni0.5–xMn1.5+x]O4 (x = 0, 0.05, and 0.08) spinel cathodes for lithium-ion batteries10.1021/cm301825h ↗
23. Spinel LiNi0.5Mn1.5O4 cathode for rechargeable lithiumion batteries: nano vs micro, ordered phase (P4332) vs disordered phase (Fd 3¯m), Nano
24. Effect of Zr doping on LiNi0.5Mn1.5O4 with ordered or disordered structures10.1016/j.jallcom.2018.03.177 ↗
25. A new approach for compensating the irreversible capacity loss of high-energy Si/C/LiNi0.5Mn1.5O4 lithium-ion batteries10.1016/j.jpowsour.2017.03.051 ↗
26. Improvement of cycle stability at elevated temperature and high rate for LiNi0.5−xCuxMn1.5O4 cathode material after Cu substitution10.1016/j.materresbull.2012.12.071 ↗
27. Co-precipitation preparation of LiNi0.5Mn1.5O4 hollow hierarchical microspheres with superior electrochemical performance for 5 V Li-ion batteries10.1016/j.jallcom.2017.09.306 ↗
28. Improved rate performance of LiNi0.5Mn1.5O4 as cathode of lithium-ion battery by Li0.33La0.56TiO3 coating10.1016/j.matlet.2018.12.070 ↗
29. LiNi0.5Mn1.5O4 nanostructures with two-phase intergrowth as enhanced cathode for lithium-ion batteries10.1016/j.electacta.2013.12.176 ↗
30. A new solid-state process for synthesis of LiMn1.5Ni0.5O4-δ spinel10.1016/j.jpowsour.2010.02.011 ↗
31. Performance of LiNi0.5Mn1.5O4 prepared by solid-state reaction10.1016/j.jpowsour.2008.11.001 ↗
32. Effect of cation and anion doping on microstructure and electrochemical properties of the LiMn1.5Ni0.5O4-δ spinel10.1016/j.jpowsour.2013.12.135 ↗
33. Integrated nano-domains of disordered and ordered spinel phases in LiNi0.5Mn1.5O4 for Li-ion batteries10.1021/cm501203r ↗
34. Role of cation ordering and surface segregation in high-voltage spinel LiMn1.5Ni0.5–xMxO4 (M = Cr, Fe, and Ga) cathodes for lithium-ion batteries10.1021/cm301844w ↗
35. Boosting the stable Li storage performance in one-deimensional LiLaxMn2−xO4 nanorods at elevated temperature10.1016/j.ceramint.2019.06.187 ↗
36. Comparison of Li/Ni antisite defects in Fd-3m and P4332 nanostructured LiNi0.5Mn1.5O4 electrode for Li-ion batteries10.1016/j.electacta.2016.06.124 ↗
37. Octahedral nano-particles constructed LiNi0.5Mn1.5O4 microspheres as high voltage cathode materials for long-life lithium-ion batteries10.1016/j.ceramint.2018.07.278 ↗
38. Polyhedral LiNi0.5Mn1.5O4 with excellent electrochemical properties for lithium-ion batteries10.1039/C4TA02371D ↗
39. Effect of surface modification on nano-structured LiNi0.5Mn1.5O4 spinel materials10.1021/acsami.5b01392 ↗
40. LiNi0.5Mn1.5O4 porous nanorods as high-rate and long-life cathodes for Li-ion batteries10.1021/nl401072x ↗
41. Preparing LiNi0.5Mn1.5O4 nanoplates with superior properties in lithium-ion batteries using bimetal-organic coordination-polymers as precursors10.1039/C4TA01147C ↗
42. Controllable fabrication and Li storage kinetics of 1D spinel LiMn2O4 positive materials for Li-ion batteries: an exploration of critical diameter10.1002/cssc.201902846 ↗
43. Microwave-enhanced electrochemical cycling performance of the LiNi0.2Mn1.8O4 spinel cathode materials at elevated temperature10.1039/C6CP01873D ↗
44. Characterisation of electrode/electrolyte interface with X-ray reflectometry and epitaxial-film LiMn2O4 electrode10.1149/1.2778853 ↗
45. A facile segregation process and restoration of LiMn2O4 cathode material from spent lithium-ion batteries10.1149/1945-7111/ab812d ↗
46. α-MnO2 nanorod/onion-like carbon composite cathode material for aqueous zinc-ion battery10.1016/j.matchemphys.2019.03.069 ↗
47. Manganese oxide/graphene oxide composites for high-energy aqueous asymmetric electrochemical capacitors10.1016/j.electacta.2013.06.096 ↗
48. High-performance Mn3O4/Onion-like carbon (OLC) nanohybrid pseudocapacitor: unravelling the intrinsic properties of OLC against other carbon supports10.1016/j.carbon.2017.02.050 ↗
49. Fluorinated Mn3O4 nanospheres for lithium-ion batteries: Low-cost synthesis with enhanced capacity, cyclability and charge-transport10.1016/j.matchemphys.2018.01.003 ↗
50. Molten Salt-directed synthesis method for LiMn2O4 nanorods as a cathode material for a lithium-ion battery with superior cyclability10.1088/2053-1591/4/2/025030 ↗
51. Conversion of electrolytic MnO2 to Mn3O4 nanowires for high-performance anode materials for lithium-ion batteries10.1016/j.jelechem.2018.11.002 ↗
52. Probing the electrochemistry of MXene (Ti2CTx)/electrolytic manganese dioxide (EMD) composites as anode materials for lithium-ion batteries10.1016/j.electacta.2018.12.013 ↗
53. Morphological evolution of high-voltage spinel LiNi0.5Mn1.5O4 cathode materials for lithium-ion batteries: The critical effects of surface orientations and particle size10.1021/acsami.5b11389 ↗
54. Two-step oxalate approach for the preparation of high performance LiNi0.5Mn1.5O4 cathode material with high voltage10.1016/j.jpowsour.2013.09.002 ↗
55. Structural and electrochemical properties of the high Ni content spinel LiNiMnO410.3390/electrochem2010009 ↗
56. Excellent rate capability and cycling stability in Li+ -conductive Li2SnO3-coated LiNi0.5Mn1.5O4 cathode materials for lithium-ion batteries10.1039/C8DT00014J ↗
57. Caterpillar-like sub-micron LiNi0.5Mn1.5O4 structures with site disorder and excess Mn3+ as high performance cathode material for lithium ion batteries10.1016/j.electacta.2016.07.039 ↗
58. Research progress in high voltage spinel LiNi0.5Mn1.5O4 material10.1016/j.jpowsour.2010.03.067 ↗
59. High rate performance and kinetic investigation of polyhedral Li1.05Mn1.95−xNixO4 cathode material10.1016/j.ceramint.2020.09.086 ↗
60. High-rate and long-life performance of a truncated spinel cathode material with off-stoichiometric composition at elevated temperature10.1016/j.electacta.2016.12.096 ↗
61. Sonochemical synthesis of LiNi0.5Mn1.5O4 and its electrochemical performance as a cathode material for 5 V Li-ion batteries10.1016/j.ultsonch.2015.02.007 ↗
62. Synthesis of LiNi0.5Mn1.5O4 cathode material with improved electrochemical performances through a modified solid-state method10.1016/j.powtec.2016.02.002 ↗
63. Preparation and electrochemical studies of electrospun TiO2 nanofibers and molten salt method nanoparticles10.1016/j.electacta.2009.12.095 ↗
64. Origin of enhanced cyclability in covalently modified LiMn1.5Ni0.5O4 cathodes10.1021/acsami.9b12912 ↗
65. Polyhedral ordered LiNi0.5Mn1.5O4 spinel with excellent electrochemical properties in extreme conditions10.1016/j.jpowsour.2014.10.073 ↗
66. In situ synchrotron radiation diffraction study of the Li+ de/intercalation behavior in spinel LiNi0.5Mn1.5O4-δ10.1016/j.cej.2020.125998 ↗
67. Constructing tri-functional modification for spinel LiNi0.5Mn1.5O4 via fast ion conductor10.1016/j.jpowsour.2019.227677 ↗
68. A truncated manganese spinel cathode for excellent power and lifetime in lithium-ion batteries10.1021/nl303619s ↗
69. Exceptional performance of a high voltage spinel LiNi0.5Mn1.5O4 cathode in all one-dimensional architectures with an anatase TiO2 anode by electrospinning10.1039/C4NR01892C ↗
70. Key strategies for enhancing the cycling stability and rate capacity of LiNi0.5Mn1.5O4 as high-voltage cathode materials for high power lithium-ion batteries10.1016/j.jpowsour.2016.03.070 ↗
71. Structural and electrochemical characteristics of morphology-controlled Li[Ni0.5Mn1.5]O4 cathodes10.1016/j.electacta.2015.01.027 ↗
72. Ni/Mn ratio and morphology-dependent crystallographic facet structure and electrochemical properties of the high-voltage spinel LiNi0.5Mn1.5O4 cathode material10.1039/C5RA03602J ↗
73. Sn-based intermetallic alloy anode materials for the application of lithium ion batteries10.1016/j.electacta.2015.02.057 ↗
74. Spark plasma-sintered Sn-based intermetallic alloys and their Li-storage studies10.1007/s10008-016-3187-6 ↗
75. The effect of particle surface facets on the kinetic properties of LiMn1.5Ni0.5O4 cathode materials10.1039/C2TA00212D ↗