journal article·2022-04

Enhanced charge balance with antibiotics in both electron and hole transport layers of InP/ZnSexS1–x/ZnS-based quantum dot light-emitting diodes

Awais Ali, Wei Jiang, Yonghyeok Choi, Eunhwa Jeon, Heeyeop Chae

Publisher page

Abstract

An antibiotic ampicillin was introduced in InP/ZnSe xS 1–x/ ZnS-based quantum dot light-emitting diodes (QLEDs) to achieve charge balance via band alignment. The charge distribution on ampicillin facilitates the generation of an interfacial dipole, and the polarity of ampicillin is controlled by varying the pH of the charge transport layers of the QLEDs. In ZnO electron transport layers (ETLs), ampicillin is anionic at pH ∼7.5, and the weak interfacial dipole reduces the conductivity of the ETL. The anionic ampicillin in ZnO ETL also increases the energy of the lowest unoccupied molecular orbital of ZnO from 3.55 to 3.80 eV. In PEDOT:PSS hole injection layers (HILs), ampicillin is cationic at pH ∼4, and a strong interfacial dipole increases the conductivity of the HIL. The cationic ampicillin in PEDOT:PSS HIL also decreases the energy of the highest occupied molecular orbital of PEDOT:PSS from 5.25 to 5.30 eV. The improved charge balance achieved through energy band alignment enhanced the external quantum efficiency from 0.9% to 4.7%. This is the first report of a QLED in which same antibiotic material was applied to both the ETLs and HILs to enhance the band alignment, which resulted in charge balance.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Quantum Dots Synthesis And Properties · Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Synthesis and characterization of nearly monodisperse CdE (E= sulfur, selenium, tellurium) semiconductor nanocrystallites10.1021/ja00072a025 ↗
2. Highly efficient green‐light‐emitting diodes based on CdSe@ ZnS quantum dots with a chemical‐composition gradient10.1002/adma.200801908 ↗
3. Polyethylenimine ethoxylated-mediated all-solution-processed high-performance flexible inverted quantum dot-light-emitting device10.1021/acsnano.6b08142 ↗
4. Excellent stability of thicker shell CdSe@ ZnS/ZnS quantum dots10.1039/C7RA06957J ↗
5. Multi-primary-color quantum-dot down-converting films for display applications10.1364/OE.27.028480 ↗
6. Cadmium‐Free InP/ZnSeS/ZnS Heterostructure‐Based Quantum Dot Light‐Emitting Diodes with a ZnMgO Electron Transport Layer and a Brightness of Over 10 000 cd m-2
7. Nanocrystals of cesium lead halide perovskites (CsPbX3, X= Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color gamut10.1021/nl5048779 ↗
8. Brightly luminescent and color-tunable colloidal CH3NH3PbX3 (X= Br, I, Cl) quantum dots: potential alternatives for display technology10.1021/acsnano.5b01154 ↗
9. Development of colloidal quantum dots for electrically driven light-emitting devices10.4191/kcers.2017.54.6.03 ↗
10. Tunable, bright, and narrow-band luminescence from colloidal indium phosphide quantum dots10.1021/acs.chemmater.7b02204 ↗
11. Efficiency enhancement of Tris (dimethylamino)-phosphine-based red indium phosphide quantum-dot light-emitting diodes via chlorine-doped ZnMgO electron transport layers10.1021/acs.jpcc.0c07209 ↗
12. Efficient green indium phosphide quantum dots with tris (dimethylamino)-phosphine phosphorus precursor for electroluminescent devices
13. Micro-light-emitting diodes with quantum dots in display technology10.1038/s41377-020-0268-1 ↗
14. Stability of quantum dots, quantum dot films, and quantum dot light‐emitting diodes for display applications10.1002/adma.201804294 ↗
15. Hole injection of quantum dot light-emitting diodes facilitated by multilayered hole transport layer10.1016/j.apsusc.2021.149944 ↗
16. Flexible quantum dot light-emitting diodes for next-generation displays10.1038/s41528-018-0023-3 ↗
17. Bright and efficient full-color colloidal quantum dot light-emitting diodes using an inverted device structure10.1021/nl3003254 ↗
18. High-efficiency quantum-dot light-emitting devices with enhanced charge injection10.1038/nphoton.2013.70 ↗
19. Recent progress and challenges of electron transport layers in organic–inorganic perovskite solar cells10.3390/en13215572 ↗
20. Double metal oxide electron transport layers for colloidal quantum dot light-emitting diodes10.3390/nano10040726 ↗
21. High efficiency quantum dot light-emitting diode by solution printing of zinc oxide nanoparticles10.1166/jnn.2020.17591 ↗
22. Efficient inverted polymer solar cells employing favourable molecular orientation10.1038/nphoton.2015.84 ↗
23. Strong addition effect of n-type polymer with mid-energy level in polymer: fullerene solar cells with power conversion efficiency exceeding 10%10.1039/C8TA00147B ↗
24. Urea-doped ZnO films as the electron transport layer for high efficiency inverted polymer solar cells10.3389/fchem.2018.00398 ↗
25. Solution-processable ZnO/carbon quantum dots electron extraction layer for highly efficient polymer solar cells10.1021/acsami.7b17969 ↗
26. Effective approaches to improve the electrical conductivity of PEDOT: PSS: a review10.1002/aelm.201500017 ↗
27. Polymer optoelectronic devices with high‐conductivity poly (3, 4–ethylenedioxythiophene) anodes10.1081/MA-200035426 ↗
28. Structural control of mixed ionic and electronic transport in conducting polymers10.1038/ncomms11287 ↗
29. Accelerating FRET between near-infrared emitting quantum dots using a molecular J-aggregate as an exciton bridge10.1021/acs.nanolett.7b02559 ↗
30. Extracting conformational ensembles of small molecules from molecular dynamics simulations: ampicillin as a test case10.3390/computation4010005 ↗
31. InP-based quantum dots having an InP core, composition-gradient ZnSeS inner shell, and ZnS outer shell with sharp, bright emissivity, and blue absorptivity for display devices10.1021/acsanm.0c00008 ↗
32. Economic and Size-Tunable Synthesis of InP/ZnE (E= S, Se) Colloidal Quantum Dots10.1021/acs.chemmater.5b02138 ↗
33. Near-complete photoluminescence retention and improved stability of InP quantum dots after silica embedding for their application to on-chip-packaged light-emitting diodes10.1039/C8RA00119G ↗
34. Chemistry of InP nanocrystal syntheses10.1021/acs.chemmater.5b05044 ↗
35. InP/ZnS/ZnS core/shell blue quantum dots for efficient light‐emitting diodes10.1002/adfm.202005303 ↗
36. Facile synthesis and enhanced luminescence behavior of ZnO: reduced graphene oxide (rGO) hybrid nanostructures10.1016/j.jlumin.2018.06.023 ↗
37. Mo-doped ZnO nanoflakes on Ni-foam for asymmetric supercapacitor applications10.1039/C9RA05051E ↗
38. Honeycomb-like ZnO/SnO2 nanocomposite at nickel foam for high-performance asymmetric supercapacitors10.1039/C9NJ01270B ↗
39. Spectroscopic study on sputtered PEDOT·PSS: Role of surface PSS layer10.1016/j.orgel.2006.04.005 ↗
40. Characterizing annealing effect of poly (3, 4-ethylenedioxythiophene) polymerized with poly (4-styrenesulfonate) conjugated film on the molecular arrangement and work function by core-level and valence-level band spectra10.1149/2.028201jss ↗
41. Catechol derivatives as dopants in PEDOT: PSS to improve the performance of p–i–n perovskite solar cells10.1039/C7TA08827B ↗
42. Enhanced thermoelectric properties of PEDOT: PSS nanofilms by a chemical dedoping process10.1039/C3TA14960A ↗
43. Highly efficient and fully solution-processed inverted light-emitting diodes with charge control interlayers10.1021/acsami.8b05092 ↗
44. Composition-tailored ZnMgO nanoparticles for electron transport layers of highly efficient and bright InP-based quantum dot light emitting diodes10.1039/C9CC06882A ↗
45. The effect of introducing antibiotics into organic light-emitting diodes
46. Intrinsic origin of electron mobility reduction in high-k MOSFETs-from remote phonon to bottom interface dipole scattering
47. Boosting the efficiency of inverted quantum dot light-emitting diodes by balancing charge densities and suppressing exciton quenching through band alignment10.1039/C7NR06248F ↗
48. Work function modification of PEDOT: PSS by mixing with barium acetylacetonate10.1039/D0RA02575E ↗
49. O 2 plasma-functionalized SWCNTs and PEDOT/PSS composite film assembled by dielectrophoresis for ultrasensitive trimethylamine gas sensor10.1039/c3an36690a ↗
50. PEDOT: PSS/graphene quantum dots films with enhanced thermoelectric properties via strong interfacial interaction and phase separation10.1038/s41598-018-24632-4 ↗
51. Investigation of a proposed penicillin G acidic degradation scheme using high-pressure liquid chromatography and optimization techniques and mechanistic considerations10.1039/p29830001699 ↗
52. Degradation pathways of ampicillin in alkaline solutions10.1111/j.2042-7158.1997.tb06124.x ↗
53. A work-function tunable polyelectrolyte complex (PEI: PSS) as a cathode interfacial layer for inverted organic solar cells10.1039/C4TA00289J ↗
54. Electrostatically self‐assembled nonconjugated polyelectrolytes as an ideal interfacial layer for inverted polymer solar cells10.1002/adma.201200594 ↗
55. Impact of interfacial dipole on carrier transport in bulk heterojunction poly (3-hexylthiophene) and [6,6]-phenyl C 61-butyric acid methyl ester blends10.1063/1.3499368 ↗
56. Enhanced hole injection assisted by electric dipoles for efficient perovskite light-emitting diodes10.1038/s43246-020-00084-0 ↗
57. Organic light‐emitting diodes with 30% external quantum efficiency based on a horizontally oriented emitter10.1002/adfm.201300104 ↗
58. Structural investigation of new metabolites of aminopenicillins excreted in human urine10.1248/cpb.28.3527 ↗
59. Balancing the electron and hole transfer for efficient quantum dot light-emitting diodes by employing a versatile organic electron-blocking layer10.1021/acsami.8b00729 ↗
60. Blue quantum dot light-emitting diodes with high luminance by improving the charge transfer balance10.1039/C9CC00230H ↗