Effects of Bi modification and ultrasonic treatment on microstructure evolution and mechanical properties of AlMg5Si2Mn alloy
Source abstract
Abstract
The effects of Bi modification and ultrasonic treatment (UST) on the microstructure and mechanical properties of AlMg5Si2Mn alloy were investigated. Compared to the alloy without any treatment, the eutectic Mg 2 Si phases are refined effectively by Bi addition, and its morphology is changed from the mazelike thick lamellars for the base alloy to thin coralline fibers for the containing Bi alloy. The modification of eutectic Mg 2Si phase is attributed to the Bi segregation and composition supercooling in front of the growing Mg 2Si phase. UST can assist modification of Bi on the eutectic Mg 2 Si phase and change the morphology of the primary α-Al phase in the AlMg5Si2Mn alloy from coarse dendrites to small near-spherical equiaxed crystals, meanwhile, which can also promote the homogenization of the treated melt and uniform distribution of Bi atoms or clusters in the melt. Moreover, the yield strength, ultimate tensile strength and elongation of the alloy modified by 0.3% Bi addition combined with UST at 660 °C are obviously enhanced, and the fracture modes of the alloys are changed from brittleness to toughness.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Development of a high strength Al-Mg2Si-Mg-Zn based alloy for high pressure die casting10.1016/j.msea.2014.12.019 ↗
2. Development of a super ductile diecast Al-Mg-Si alloy10.1016/j.msea.2012.07.074 ↗
3. Development of a super ductile diecast Al-Mg-Si alloy10.1016/j.msea.2012.07.074 ↗
4. Progress in ductile aluminum high pressure die casting alloys for the automotive industry, La
5. Improving microstructure and mechanical properties of hypoeutectic Al-Mg2Si alloy by Gd addition10.1016/j.jallcom.2019.152178 ↗
6. Modification of eutectic Mg2Si in AlMg5Si2Mn alloy by pre-homogenization deformation treatment with different reduction conditions10.1016/j.matchar.2018.04.045 ↗
7. Effect of electromagnetic fields on microstructure and mechanical properties of sub-rapid solidification-processed Al-Mg-Si alloy during twin-roll casting10.1016/j.msea.2019.138328 ↗
8. Effect of heat treatment combined with high pressure torsion process on microstructure and hardness of AlMg5Si2Mn alloy10.4028/www.scientific.net/SSP.275.89 ↗
9. Variation of microstructure and mechanical properties of hybrid particulates reinforced Al-alloy matrix composites with ultrasonic treatment10.1016/j.jallcom.2019.03.074 ↗
10. Effect of pre-homogenization deformation treatment on the workability and mechanical properties of AlMg5Si2Mn alloy10.1016/j.msea.2016.12.107 ↗
11. Surface hardening of AlMg5Si2Mn alloy through multi-axis compression using max strain10.4028/www.scientific.net/SSP.308.171 ↗
12. Effect of heat treatment combined with high pressure torsion process on microstructure and hardness of AlMg5Si2Mn alloy10.4028/www.scientific.net/SSP.275.89 ↗
13. Production of natural and synthesized aluminum-based composite materials with the aid of ultrasonic (cavitation) treatment of the melt10.1016/S1350-4177(02)00158-X ↗
14. Refinement of eutectic silicon phase of aluminum A356 alloy using high-intensity ultrasonic vibration10.1016/j.scriptamat.2005.11.004 ↗
15. Enhanced grain refinement of cast aluminum alloy by thermal and mechanical treatment of Al-5Ti-B master alloy10.1016/S1003-6326(13)62631-X ↗
16. Grain refinement of A356 alloy by Al-Ti-B-C master alloy and its effect on mechanical properties10.1016/j.matdes.2012.12.033 ↗
17. Effects of modifying the hypoeutectic AlMg5Si2Mn alloy via addition of Al10Sr and/or Al5TiB
18. The effect of Li on the tensile properties of cast Al-Mg2Si metal matrix composite10.1016/j.msea.2008.01.039 ↗
19. Enhanced mechanical properties of hypoeutectic Al-10Mg2Si cast alloys by Bi addition10.1016/j.jallcom.2018.07.070 ↗
20. Influence of Bi addition on microstructure and dry sliding wear behaviors of cast Al-Mg2Si metal matrix composite10.1016/S1003-6326(13)62627-8 ↗
21. Effect of primary and eutectic Mg2Si crystal modifications on the mechanical properties and sliding wear behaviour of an Al-20Mg2Si-2Cu-xBi composite10.1016/j.jmst.2016.01.014 ↗
22. The influence of pure Na on the microstructure and tensile properties of Al-Mg2Si metal matrix composite10.1016/j.msea.2011.02.010 ↗
23. Microstructure and mechanical properties of Mg-6Al magnesium alloy with yttrium and neodymium
24. Simultaneous grain refinement and eutectic Mg2Si modification in hypoeutectic Al-11Mg2Si alloys by Sc addition10.1016/j.jallcom.2019.03.326 ↗
25. Multi-alloying effect of Sc, Zr, Cr on the Al-Mg-Si-Mn high-pressure die casting alloys10.1016/j.matchar.2020.110537 ↗
26. Surface segregation of trace element bismuth during heat treatment of aluminum10.1149/2.100203jes ↗
27. The disruption of oxide defects within aluminium alloy castings by the addition of bismuth10.1016/S0167-577X(97)00244-9 ↗
28. A systematic investigation of fracture mechanisms in Al-Si based eutectic alloy-Effect of Si modification10.1016/j.msea.2013.09.019 ↗
29. The Al-Bi (Aluminum-Bismuth) system10.1007/BF02868547 ↗
30. Effect of Bi modification treatment on microstructure, tensile properties, and fracture behavior of cast Al-Mg2Si metal matrix composite
31. The Bi-Mg (bismuth-magnesium) system10.1007/BF02887150 ↗
32. Solidification and structural characteristics of α(Al)-Mg2Si eutectic10.2320/matertrans1989.38.553 ↗
33. Influence of Bi addition on microstructure and dry sliding wear behaviors of cast Al-Mg2Si metal matrix composite10.1016/S1003-6326(13)62627-8 ↗
34. Modification of Mg2Si morphology in Mg-Si alloys with Bi10.1016/j.jmatprotec.2007.12.038 ↗
35. Effect of bismuth on microstructure of unmodified and Sr-modified Al-7Si-0.4Mg alloys10.1016/S1003-6326(11)60881-9 ↗
36. The disruption of oxide defects within aluminium alloy castings by the addition of bismuth10.1016/S0167-577X(97)00244-9 ↗
37. Variation of microstructure and mechanical properties of hybrid particulates reinforced Al-alloy matrix composites with ultrasonic treatment[J]10.1016/j.jallcom.2019.03.074 ↗
38. Effects and mechanism of ultrasonic irradiation on solidification microstructure and mechanical properties of binary TiAl alloys10.1016/j.ultsonch.2017.03.006 ↗
39. Theoretical estimation of the temperature and pressure within collapsing acoustical bubbles10.1016/j.ultsonch.2013.05.008 ↗
40. High-energy ultrasonic fifield effects on the microstructure and mechanical behaviors of A356 alloy10.1016/j.jallcom.2008.02.091 ↗
41. Sonochemistry10.1126/science.247.4949.1439 ↗
42. Influence of ultrasonic vibration on mechanical properties and microstructure of 1Cr18Ni9Ti stainless steel10.1016/j.matdes.2006.04.025 ↗
43. Microstructure evolution and mechanical properties of quasicrystal-reinforced Mg-Zn-Y alloy subjected to ultrasonic vibration10.1016/j.msea.2016.10.035 ↗
44. Effects of vibration during solidification10.1179/imr.1981.26.1.71 ↗
45. Research on solidification of metal melt under Ultrasonic field
46. Development of non-dendritic microstructure of aluminum alloy in semi-solid state under ultrasonic vibration10.4028/www.scientific.net/SSP.141-143.451 ↗
47. Effects of ultrasonic vibration on microstructure and mechanical properties of nano-sized SiC particles reinforced Al-5Cu composites10.1016/j.ultsonch.2017.12.038 ↗
48. Refinement of LPSO structure in Mg-Ni-Y alloys by ultrasonic treatment10.1016/j.ultsonch.2017.07.042 ↗