journal article·2022-03

Ternary relation among stacking fault energy, grain size and twin nucleation size in nanocrystalline and ultrafine grained CuAl alloys

Shaojia Shi, Liangjuan Dai, Yonghao Zhao

Publisher page

Abstract

Abstract The stacking fault energy γ of an alloy has been reported to significantly affect the grain size d and twin nucleation size rc during grain refinement. However, ternary relation among γ, d and rc has not been investigated comprehensively. Here we prepared nanocrystalline (NC) and ultrafine-grained (UFG) 99.99 wt.% Cu, Cu-0.86 wt.% Al and Cu-2.2 wt.% Al alloys with different γ by high-pressure torsion (HPT), and then characterized d and rc. Transmission electron microscopy observations show that under the same experimental condition d decreases and corresponding grain refinement mechanism transforms from dislocation subdivision to twin segmentation with decreasing γ. The relation among γ, d and rc from experiments are consistent well with theoretical prediction from Meyers model. rc decreases with decreasing d, and the variation is exacerbated by the decrease of γ. rc increases first and then decreases by forming a peak-shaped variation with decreasing γ when d is in UFG regime, suggesting there exists an optimum stacking fault energy γc for twin nucleation. The rc peak becomes flat and moves to higher γ value when d is in NC regime due to the enhanced geometric effect of d on rc which weakens the role of γ. Our findings reveal a comprehensive ternary relationship among γ, d and rc, and provide guidance for designing NC and UFG materials with high-density twins and good strength-ductility combination.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Deformation twinning10.1016/0079-6425(94)00007-7 ↗
2. Structural evolution of metallic materials processed by severe plastic deformation10.1016/j.mser.2018.06.001 ↗
3. Deformation twinning in nanocrystalline materials10.1016/j.pmatsci.2011.05.001 ↗
4. Review on superior strength and enhanced ductility of metallic nanomaterials10.1016/j.pmatsci.2018.02.002 ↗
5. Strategies for improving tensile ductility of bulk nanostructured materials10.1002/adem.200900335 ↗
6. Ultrahigh strength and high electrical conductivity in copper10.1126/science.1092905 ↗
7. Strengthening materials by engineering coherent internal boundaries at the nanoscal10.1126/science.1159610 ↗
8. Revealing the maximum strength in nanotwinned copper10.1126/science.1167641 ↗
9. Tailoring stacking fault energy for high ductility and high strength in ultrafine grained Cu and its alloy10.1063/1.2356310 ↗
10. Effect of stacking-fault energy on deformation twin thickness in Cu-Al alloys10.1016/j.scriptamat.2008.10.005 ↗
11. Microstructures and properties of copper processed by equal channel angular extrusion for 1–16 passes10.1016/j.actamat.2004.06.040 ↗
12. Influence of stacking fault energy on microstructural development in equal-channel angular pressing10.1557/JMR.1999.0546 ↗
13. General-stacking-fault energies in highly strained metallic environments: ab initio calculations10.1103/PhysRevB.76.054124 ↗
14. The stacking-fault energy of F.C.C metals
15. The stacking-fault energy of nickel10.1080/14786437708232942 ↗
16. The microstructural characteristics of ultrafine-grained nickel10.1016/j.msea.2004.09.030 ↗
17. Ab initio calculations of the generalized stacking fault energy in aluminium alloys10.1016/j.scriptamat.2011.01.034 ↗
18. Microstructural evolution and mechanical properties of Cu-Al alloys subjected to equal channel angular pressing10.1016/j.actamat.2008.12.002 ↗
19. Influence of stacking fault energy on nanostructure formation under high pressure torsion10.1016/j.msea.2005.08.074 ↗
20. Stacking fault/twin boundary effect on grain refinement induced by high-pressure torsion in Cu-30wt% Zn10.1016/j.msea.2010.04.036 ↗
21. Effect of grain size on the competition between twinning and detwinning in nanocrystalline metals10.1103/PhysRevB.84.235401 ↗
22. Double-inverse grain size dependence of deformation twinning in nanocrystalline Cu10.1103/PhysRevB.81.172104 ↗
23. Influence of stacking fault energy on deformation mechanism and dislocation storage capacity in ultrafine-grained materials10.1016/j.scriptamat.2008.08.032 ↗
24. Effect of stacking-fault energy, strain rate and temperature on microstructure and strength of nanostructured Cu-Al alloys subjected to plastic deformation10.1016/j.actamat.2011.06.013 ↗
25. On the stacking-fault energies of copper alloys10.1080/14786437708235982 ↗
26. Humphreys · 2004
27. Dieter · 1986
28. Grain size effect on deformation twin thickness in ananocrystalline metal with low stacking-fault energy10.1557/jmr.2019.194 ↗
29. Formation of deformation twins in fcc crystals10.1016/0001-6160(73)90085-0 ↗
30. Mechanism of the Koehler dislocation multiplication process10.1080/01418619708209978 ↗
31. The onset of twinning in metals: a constitutive description10.1016/S1359-6454(01)00300-7 ↗
32. Critique of mechanisms of formation of deformation, annealing and growth twins: face-centered cubic metals and alloys10.1016/j.scriptamat.2012.09.011 ↗
33. Deformation-mechanism map for nanocrystalline metals by molecular-dynamics simulation10.1038/nmat1035 ↗
34. Adislocation model for the minimum grain size obtainable by milling10.1016/S1359-6454(03)00230-1 ↗
35. Physics and phenomenology of strain hardening: the FCC case10.1016/S0079-6425(02)00003-8 ↗
36. D. Hull, D.J. Bacon, Introduction to dislocation, University of Liverpool. University, Liverpool, 2011, pp. 99–102.
37. X.Z. Gao, Y.P. Lu, J.Z. Liu, J. Wang, T.M. Wang, Y.H. Zhao, Extraordinary ductility and strain hardening of Cr26Mn20Fe20Co20Ni14 TWIP high-entropy alloy by cooperative planar slipping and twinning, Materialia 8 (2019) 100485.10.1016/j.mtla.2019.100485 ↗
38. Significance of stacking fault energy in bulk nanostructured materials: insight from Cu and its binary alloys ad model systems10.1016/j.pmatsci.2018.11.001 ↗
39. Microstructural evolution in copper subjected to severe plastic deformation: experiments and analysis10.1016/j.actamat.2006.07.008 ↗
40. Murr · 1976
41. Grain boundary formation by remnant dislocations from the de-twinning of thin nano-twins10.1016/j.scriptamat.2015.01.001 ↗
42. Concurrent microstructural evolution of ferrite and austenite in a duplex stainless steel processed by high-pressure torsion10.1016/j.actamat.2013.09.030 ↗
43. J.P. Hirth, J. Lothe, Theory of Dislocations, Krieger, Malabar, UK, 1992, pp. 131–137.
44. A generalized method for estimating multiaxial elastic plastic notch stresses and strains10.1115/1.3225815 ↗
45. Varying tensile fracture mechanisms of Cu and Cu-Zn alloys with reduced grain size: from necking to shearing instability10.1016/j.msea.2013.11.079 ↗
46. Stacking-fault energy effect on zero-strain deformation twinning in nanocrystalline Cu-Zn alloys10.1016/j.scriptamat.2015.07.027 ↗
47. Inverse grain-size effect on twinning in nanocrystalline Ni10.1103/PhysRevLett.101.025503 ↗
48. Effects of Mn and Al contents on cryogenic-temperature tensile and Charpy impact properties in four austenitic high-Mn steels10.1016/j.actamat.2015.08.027 ↗
49. Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rate10.1016/j.actamat.2010.05.049 ↗
50. Deformation twinning in nanocrystalline aluminum10.1126/science.1083727 ↗
51. Deformation mechanism in nanocrystalline Al: partial dislocation slip10.1063/1.1594836 ↗
52. Evolution of microstructural parameters and flow stresses toward limits in nickel deformed to ultra-high strains10.1016/j.actamat.2008.07.040 ↗