High-capacity and cycling-stable anode for sodium ion batteries constructed from SnS2/MWCNTs nanocomposites
Source abstract
Abstract
Abstract Recently, SnS2 has obtained considerable attention for sodium-ion batteries (SIBs) as anode materials because of their high theoretical capacities. However, the large capacity loss and poor conductivity during the charge-discharge process need to be solved urgently. In this work, the synthesis of the SnS2/MWCNTs nanocomposites has been designed and proposed to be an anode for SIBs. We can find that the incorporation of MWCNTs not only promote the aggregation and reduce the separation of SnS2, but also reduce the loss of SnS2 nanoparticles, and thus generating large size nanoparticles. Furthermore, XPS and TGA results reveal that the bonds between MWCNTs and SnS2 nanoparticles enhance the structural stability of SnS2/MWCNTs nanocomposites, prevent the aggregation, and effectively buffer the volume changes of the SnS2/MWCNTs nanocomposites during the charge-discharge process. Consequently, the performance is significantly reinforced, which could be ascribed to the synergistic effects of SnS2/MWCNTs nanocomposites, especially for the 0.015 g sample. This work offers an easy route to boost the electrochemical energy storage performance of SIBs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. High-performance perovskite/Cu(In,Ga)Se2 monolithic tandem solar cells10.1126/science.aat5055 ↗
2. Recent advances in semitransparent perovskite solar cells10.1002/inf2.12154 ↗
3. Silver surface treatment of Cu(In,Ga)Se2 (CIGS) thin film: a new passivation process for the CdS/CIGS heterojunction interface10.1002/solr.202000290 ↗
4. Boosting Cu(In,Ga)Se2 Thin Film Growth in Low-Temperature Rapid-Deposition Processes: An Improved Design for the Single-Heating Knudsen Effusion
5. Low-cost and highly safe solid-phase sodium ion battery with a Sn–C nanocomposite anode10.1016/j.jiec.2021.05.033 ↗
6. CNTs embedded in layered Zn-doped Co3O4 nano-architectures as an efficient hybrid anode material for SIBs10.1016/j.jallcom.2021.158730 ↗
7. Carbon nanotube-based nanomaterials for high-performance sodium-ion batteries: Recent advances and perspectives10.1016/j.jallcom.2021.159742 ↗
8. A disordered rock salt anode for fast-charging lithium-ion batteries10.1038/s41586-020-2637-6 ↗
9. Sustainability and in situ monitoring in battery development10.1038/nmat4777 ↗
10. Unlocking the potential of cation-disordered oxides for rechargeable lithium batteries10.1126/science.1246432 ↗
11. Improving cycle stability of SnS anode for sodium-ion batteries by limiting Sn agglomeration10.1016/j.jpowsour.2017.11.084 ↗
12. Eldfellite, NaFe(SO4)2: an intercalation cathode host for low-cost Na-ion batteries10.1039/C5EE02274F ↗
13. Controlling SEI formation on SnSb-porous carbon nanofibers for improved Na ion storage10.1002/adma.201304962 ↗
14. Synthesis of phase-pure Cd2GeO4/G nanorods for high capacity Na-ion battery anode10.1016/j.jallcom.2020.156894 ↗
15. Fe7Se8 nanoparticles anchored on N-doped carbon nanofibers as high-rate anode for sodium-ion batteries10.1016/j.ensm.2019.07.017 ↗
16. Vitrification of maricite NaFePO4 crystal by laser irradiation and enhanced sodium ion battery performance10.1016/j.jallcom.2021.160928 ↗
17. Hierarchical microspheres constructed by SnS2 nanosheets and S-doped graphene for high performance lithium/sodium-ion batteries
18. Bivalence Mn5O8 with hydroxylated interphase for high-voltage aqueous sodium-ion storage10.1038/ncomms13370 ↗
19. Biphase cobalt–manganese oxide with high capacity and rate performance for aqueous sodium‐ion electrochemical energy storage10.1002/adfm.201703266 ↗
20. Framework doping of Ni enhances pseudocapacitive Na-ion storage of (Ni)MnO2 layered birnessite10.1021/acs.chemmater.9b02568 ↗
21. Exemption of lattice collapse in Ni–MnO2 birnessite regulated by the structural water mobility10.1039/D1TA06716H ↗
22. High purity Mn5O8 nanoparticles with a high overpotential to gas evolution reactions for high voltage aqueous sodium-ion electrochemical storage10.1007/s11708-017-0485-3 ↗
23. A chronicle review of nonsilicon (Sn, Sb, Ge)‐based lithium/sodium‐ion battery alloying anodes10.1002/smtd.202000218 ↗
24. Three-dimensional microflowers assembled by carbon-encapsulated-SnS nanosheets for superior Li-ion storage performance10.1016/j.jallcom.2018.07.094 ↗
25. Metal oxide/graphene composite anode materials for sodium-ion batteries10.1016/j.ensm.2018.06.027 ↗
26. SnO2@MWCNT nanocomposite as a high capacity anode material for sodium-ion batteries10.1016/j.elecom.2013.01.001 ↗
27. MoS2 nanoplatelets scaffolded within CoS2 nanobundles as anode nanomaterials for sodium-ion batteries10.1016/j.jallcom.2020.156229 ↗
28. MOF-derived FeF2 nanoparticles@graphitic carbon undergoing in situ phase transformation to FeF3 as a superior sodium-ion cathode material10.1016/j.jallcom.2020.155719 ↗
29. Y-doped P2-type Na0.67Ni0.33Mn0.67O2: a sodium-ion battery cathode with fast charging and enhanced cyclic performance10.1016/j.jallcom.2021.160027 ↗
30. The advances of metal sulfides and in situ characterization methods beyond Li ion batteries: sodium, potassium, and aluminum ion batteries
31. Synthesis of SnS/C nanofibers membrane as self-standing anode for high-performance sodium-ion batteries by a smart process10.1016/j.jallcom.2020.155899 ↗
32. Facile synthesis of macroporus SnS microspheres as a potential anode material for enhanced sodium ion batteries10.1016/j.jiec.2019.07.040 ↗
33. Graphene-based nanocomposites for energy storage10.1002/aenm.201502159 ↗
34. A Sn–SnS–C nanocomposite as anode host materials for Na-ion batteries10.1039/c3ta10920h ↗
35. SnS2 nanoplatelet@graphene nanocomposites as high-capacity anode materials for sodium-ion batteries10.1002/asia.201400018 ↗
36. Hierarchical SnS2/carbon nanotube@reduced graphene oxide composite as an anode for ultra-stable sodium-ion batteries10.1016/j.ceja.2020.100053 ↗
37. Octahedral tin dioxide nanocrystals as high capacity anode materials for Na-ion batteries10.1039/c3cp52037d ↗
38. Shielded SnS2/SnS heterostructures on three-dimensional graphene framework for high-rate and stable sodium-ion storage10.1016/j.electacta.2021.137800 ↗
39. Bi-continuous nanoporous carbon sphere derived from SiOC as high-performance anodes for PIBs10.1016/j.cej.2019.122677 ↗
40. Pseudocapacitive Na-ion storage boosts high rate and areal capacity of self-branched 2D layered metal chalcogenide nanoarrays10.1021/acsnano.6b05566 ↗
41. Defect engineering to boost the lithium-ion storage performance of Ti3C2Tx MXene induced by plasma-assisted mechanochemistry10.1021/acsaem.1c02191 ↗
42. Interlayer-expanded MoS2 vertically anchored on graphene via C─O─S bonds for superior sodium-ion batteries10.1016/j.jallcom.2021.160280 ↗
43. Sandwich-like SnS2/graphene/SnS2 with expanded interlayer distance as high-rate lithium/sodium-ion battery anode materials10.1021/acsnano.9b03330 ↗
44. Two-dimensional unilamellar cation deficient metal oxide nanosheet superlattices for high-rate sodium ion energy storage10.1021/acsnano.8b06206 ↗