journal article·2022-02

Microstructure and mechanical behavior of the laser synthesized composites modified by micro/nano scale rare earth oxides

Fei Weng, Huijun Yu, Youxiang Chew, Guijun Bi, Xueyun Du, Hongfang Tian, Chuanzhong Chen

Publisher page

Abstract

Abstract Micro- and nano-scale rare earth oxides (REOs) modified composites were fabricated by laser scanning the preplaced materials, similar to the process in selective laser melting (SLM). To conduct the comparative study on the effect of different REOs, single-layer composites were prepared on Ti-6Al-4V alloy with Ni60A+10 wt.% B4C mixture as the basic material and different REOs as the additives. Experiments with micro- and nano-scale REOs (Nd2O3, La2O3) demonstrated benefits in refining the microstructure, improving both the micro-hardness and wear property of the composites, amongst which the nano-scale REOs show better performance. Compared with the composite without REOs addition, the composite modified with 1 wt. % nano-La2O3 exhibited the finest microstructure. The mean micro-hardness increased by ~36.0% from 1058 HV0.2 to 1439 HV0.2, and the wear resistance was improved by 38.5% based on the wear volume loss. The better refining effect of the nano-scale REO was mainly attributed to the small particle size, which was more dispersive in the preplaced materials for increased nucleation. This study is not only useful for surface strengthening of titanium alloys, but also provides inspiration for fabricating bulk composite materials with suitable REO additives.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Surface modification of carbon nanotubes using 3-aminopropyltriethoxysilane to improve mechanical properties of nanocomposite based polymer matrix: experimental and Density functional theory study10.1016/j.apsusc.2017.05.148 ↗
2. Manipulating interphase reactions for mechanically robust, flame-retardant and sustainable polylactide biocomposites10.1016/j.compositesb.2020.107930 ↗
3. Microstructures induced by excimer laser surface melting of the SiCp/Al metal matrix composite10.1016/j.apsusc.2017.03.263 ↗
4. The erosion performance of particle reinforced metal matrix composite coatings produced by co-deposition cold gas dynamic spraying10.1016/j.apsusc.2016.10.155 ↗
5. A review of recent research on mechanics of multifunctional composite materials and structures10.1016/j.compstruct.2010.05.003 ↗
6. Fabrication of metal matrix composite by infiltration process—part 2: experimental study10.1016/S0924-0136(98)00304-5 ↗
7. Comprehensive analysis and manufacture of recycled aluminum based hybrid metal matrix composites through the combined method; sintering and sintering + forging10.1016/j.compositesb.2020.108040 ↗
8. Fabrication of metal matrix composites by metal injection molding—a review10.1016/j.jmatprotec.2007.10.066 ↗
9. Metal matrix composites: production by the stir casting method10.1016/S0924-0136(99)00118-1 ↗
10. Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance10.1016/j.compositesb.2018.12.146 ↗
11. Selective laser melting of dispersed TiC particles strengthened 316L stainless steel10.1016/j.compositesb.2020.108291 ↗
12. Effect of nano-TiB2 particles on the anisotropy in an AlSi10Mg alloy processed by selective laser melting10.1016/j.jallcom.2019.05.279 ↗
13. Comparison of carbon-based reinforcement on laser aided additive manufacturing Inconel 625 composites10.1016/j.apsusc.2019.06.008 ↗
14. In situ TiC/Inconel 625 nanocomposites fabricated by selective laser melting: densification behavior, microstructure evolution, and wear properties10.1016/j.apsusc.2020.145981 ↗
15. In situ reactions during direct laser deposition of Ti-B4C composites10.1016/j.scriptamat.2020.03.021 ↗
16. Reactive-deposition-based additive manufacturing of Ti-Zr-BN composites
17. Direct laser deposition of in situ Ti–6Al–4V–TiB composites10.1016/S0921-5093(03)00299-5 ↗
18. Characterization of laser powder deposited Ti–TiC composites and functional gradient materials10.1016/j.jmatprotec.2007.12.055 ↗
19. Selective laser melting to manufacture “in situ” metal matrix composites: a review10.1002/adem.201801244 ↗
20. Boron addition in a non-equiatomic Fe50Mn30Co10Cr10 alloy manufactured by laser cladding: microstructure and wear abrasive resistance10.1016/j.apsusc.2020.146084 ↗
21. The alloying effects of Cr on in-situ phase evolution and wear resistance of nickel composite coatings fabricated by wide-band laser deposition10.1016/j.surfcoat.2020.126019 ↗
22. Effect of in-situ synthesis of multilayer graphene on the microstructure and tribological performance of laser cladded Ni-based coatings10.1016/j.apsusc.2019.143581 ↗
23. Research and development status of laser cladding on magnesium alloys: a review10.1016/j.optlaseng.2017.02.007 ↗
24. Research status of laser cladding on titanium and its alloys: a review10.1016/j.matdes.2014.01.077 ↗
25. Microstructure and wear behaviors of WC-Ni coatings fabricated by laser cladding under high frequency micro-vibration10.1016/j.apsusc.2019.04.245 ↗
26. Laser/argon-arc strengthening of titanium alloy surface with Deloro matrix composites10.1016/j.optlastec.2019.105911 ↗
27. Microstructures and properties of TiN reinforced Co-based composite coatings modified with Y2O3 by laser cladding on Ti–6Al–4V alloy10.1016/j.jallcom.2015.07.295 ↗
28. Fabrication of Co-based coatings on titanium alloy by laser cladding with CeO2 addition10.1080/10426914.2016.1140199 ↗
29. Microstructure and property of Ni/WC/La2O3 coatings by ultrasonic vibration-assisted laser cladding treatment10.1016/j.optlaseng.2019.105848 ↗
30. Effect of the addition of Sm2O3 on the microstructure of laser cladding alloy coating layers10.3365/met.mat.2008.06.315 ↗
31. Effect of Mo and nano-Nd2O3 on the microstructure and wear resistance of laser cladding Ni-based alloy coatings10.1007/s00339-016-9905-1 ↗
32. The comparative study on microstructure and properties of nano-CeO2 and Sm2O3 particulate reinforced nickel-based composites by laser deposition10.1016/j.apsusc.2008.06.011 ↗
33. Effect of nano-CeO2 on microstructure and wear resistance of Co-based coatings10.1016/j.surfcoat.2015.06.014 ↗
34. Laser clad Ni-base alloy added nano- and micron-size CeO2 composites10.1016/j.optlastec.2007.10.007 ↗
35. Microstructure and mechanical properties of Inconel 625/nano-TiB2 composite fabricated by LAAM10.1016/j.matdes.2016.08.078 ↗
36. Effect of CeO2 and Y2O3 on microstructure, bioactivity and degradability of laser cladding CaO–SiO2 coating on titanium alloy10.1016/j.colsurfb.2015.01.016 ↗
37. Effect of nano-CeO2 on cobalt-based alloy laser coatings10.1016/j.jmatprotec.2007.08.050 ↗
38. Microstructure of laser-clad Ni60 cladding layers added with different amounts of rare-earth oxides on 6063 Al alloys10.1016/j.jallcom.2018.01.061 ↗
39. Microstructures and properties of Ni/TiC/La2O3 reinforced Al based composite coatings by laser cladding10.1016/j.optlastec.2019.04.002 ↗
40. Effect of the content of B4C on microstructural evolution and wear behaviors of the laser-clad coatings fabricated on Ti6Al4V10.1016/j.optlastec.2015.07.010 ↗
41. Effect of the heat treatment time on microstructure and fracture toughness of laser-clad TiB2-TiC pseudoeutectic reinforced TiNi/Ti2Ni intermetallic matrix composite coating10.1051/metal/2016014 ↗
42. Effect of process parameters on the microstructure evolution and wear property of the laser cladding coatings on Ti-6Al-4V alloy10.1016/j.jallcom.2016.09.071 ↗
43. The kinetics and mechanism of interfacial reaction in sigma fibre-reinforced Ti MMCs10.1016/S1359-835X(96)00105-4 ↗
44. Wear in relation to friction—a review10.1016/S0043-1648(00)00382-3 ↗
45. Lide · 2004
46. Effects of La2O3 on microstructure and wear properties of laser clad γ/Cr7C3/TiC composite coatings on TiAl intermatallic alloy10.1016/j.matchemphys.2006.08.013 ↗
47. P. Rogl, H. Bittermann, H. Duschanek, Boron-carbon-titanium, ternary alloy systems phase diagrams, crystallographic and thermodynamic data, 2006, pp. 68–89.
48. Promoting the heterogeneous nucleation and the functional properties of directed energy deposited NiTi alloy by addition of La2O3
49. Thermodynamic assessment of the lanthanum-oxygen system10.1361/105497101770338950 ↗