journal article·2022-01

On the dendrite deformation and evolution mechanism of Ni-based superalloy during directional solidification

Chao Chen, Jingxia Sun, Aimin Diao, Yanhong Yang, Jinguo Li, Yizhou Zhou

Publisher page

Abstract

Abstract The dendritic growth in a novel casting with complex solidification path during directional solidification was investigated by experiment and simulation. The different dendrite deformations were found in the side strip and the corner, and the misorientation was measured by electron backscattered diffraction. The dendrite deformation in the local strip above each platform causes the cumulative deviation of dendrite direction in the whole strip, and this deformation is caused by the differential thermal shrinkage between upper and lower cross-sections. In addition, the dendrite with incomplete trunk concentrately deformed in the corner, and the deviation direction is consistent with its branches toward the platform, indicating that the deformation occurs before branching and thereby thermal concentrated stress is excluded. The simulation results confirm the occurrence of horizontal shrinkage stress in the mushy zone of the platform when the dendrites in the sidebar leave the platform, and also determine that the dendrite branches occur before the effect of the thermal concentration stress in the corner.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Alloys-by-design: application to nickel-based single crystal superalloys10.1016/j.actamat.2009.08.018 ↗
2. Nickel-based superalloys for advanced turbine engines: chemistry, microstructure, and properties10.2514/1.18239 ↗
3. Comparative study of the segregation behavior and crystallographic orientation in a nickel-based single-crystal superalloy10.1016/j.jallcom.2015.04.237 ↗
4. On the origin of mosaicity in directionally solidified Ni-base superalloys10.1016/j.actamat.2021.117180 ↗
5. On crystal mosaicity in single crystal ni-based superalloys10.3390/cryst9030149 ↗
6. Heterogeneity of the dendrite array created in the root of cored SX turbine blades during initial stage of crystallization10.3390/ma14010080 ↗
7. The subgrain structure in turbine blade roots of CMSX-4 superalloy10.1016/j.jcrysgro.2013.11.092 ↗
8. Role of dendrite branching and growth kinetics in the formation of low angle boundaries in Ni-base superalloys10.1016/j.msea.2005.09.030 ↗
9. Formation of low-angle grain boundaries under different solidification conditions in the rejoined platforms of Ni-based single crystal superalloys10.1557/jmr.2018.408 ↗
10. The convergence-fault mechanism for low-angle boundary formation in single-crystal castings10.1023/A:1004747612160 ↗
11. Quantitative analysis of withdrawal rate on stray grain formation in the platforms of a Ni-based single crystal dummy blade10.1016/j.jallcom.2018.09.217 ↗
12. Effect of Ru on macro-/micro-structure evolution within platform of Ni-based superalloy single crystal blades10.1016/j.jallcom.2019.153337 ↗
13. On the origin of sliver defects in single crystal investment castings10.1016/j.actamat.2013.04.071 ↗
14. Evolution of sliver defect in Ni-based single crystal superalloy10.1007/s11661-020-06003-9 ↗
15. Sliver defect formation in single crystal Ni-based superalloy castings10.1016/j.matdes.2020.109138 ↗
16. Formation of sliver defect in Ni-based single crystal superalloy10.1007/s11661-019-05516-2 ↗
17. Investigating the evolution of freckles into sliver defects in Ni-based single-crystal superalloy castings
18. Innovations in casting techniques for single crystal turbine blades of superalloys
19. Basic research in development and application of cast superalloy
20. On the deformation of dendrites during directional solidification of a nickel-based superalloy10.1007/s11661-019-05429-0 ↗
21. Effect of the spacial dimensions on solidification defects in rejoined platform of ni-based single-crystal superalloy castings under different withdrawal rates10.1007/s11661-021-06287-5 ↗
22. 4D synchrotron X-ray tomographic quantification of the transition from cellular to dendrite growth during directional solidification10.1016/j.actamat.2016.07.002 ↗
23. The effect of natural and forced melt convection on dendritic solidification in Ga–In alloys10.1016/j.jcrysgro.2014.11.043 ↗
24. Formation of low angle boundaries in Ni-based superalloys10.1016/j.msea.2005.08.188 ↗
25. Formation of low angle boundaries in Ni-based superalloys10.1179/136404609X367353 ↗
26. Dendritic growth pattern and dendritic network distortion in the platform of a Ni-based superalloy10.1016/j.jmst.2013.09.013 ↗
27. Formation of accumulated misorientation during directional solidification of Ni-based single-crystal superalloys10.1007/s11661-018-05109-5 ↗
28. Evolution of sliver defect in Ni-based single crystal superalloy10.1007/s11661-020-06003-9 ↗
29. Evolution of grain selection in spiral selector during directional solidification of nickel-base superalloys10.1016/S1005-0302(11)60036-4 ↗
30. Evolution of a mushy zone in a static temperature gradient using a volume average approach10.1016/j.actamat.2017.09.011 ↗
31. Phase field and analytical study of mushy zone solidification in a static thermal gradient: From dendrites to planar front10.1016/j.actamat.2016.09.053 ↗
32. As-cast residual stresses in an aluminum alloy AA6063 billet: neutron diffraction measurements and finite element modeling10.1007/s11661-010-0424-y ↗
33. Directional solidification microstructures in diffusive and convective regimes10.1016/S0022-0248(00)00761-2 ↗
34. Three-dimensional dendrite growth within the shrouds of single crystal blades of a nickel-based superalloy10.1007/s11661-017-4339-8 ↗
35. Formation of low-angle grain boundaries under different solidification conditions in the rejoined platforms of Ni-based single crystal superalloys10.1557/jmr.2018.408 ↗
36. Influence of natural convection during upward directional solidification: a comparison between in situ X-ray radiography and direct simulation of the grain structure10.1016/j.actamat.2013.04.067 ↗
37. Effects of convection patterns on freckle formation of directionally solidified Nickel-based superalloy casting with abruptly varying cross-sections10.1016/j.jcrysgro.2017.03.021 ↗