journal article·2021-12

Phase transformations in Al-Ti-Mg powders consolidated by high-pressure torsion: Experiments and first-principles calculations

Yongpeng Tang, Mitsuhiro Murayama, Kaveh Edalati, Qing Wang, Satoshi Iikubo, Takahiro Masuda, Yuji Higo, Yoshinori Tange, Yasuo Ohishi, Masaki Mito, Zenji Horita

Publisher page

Abstract

Abstract A powder mixture of Al-Ti-Mg with an equal atomic fraction was subjected to severe plastic deformation using high-pressure torsion (HPT) under 6 GPa at room temperature for full consolidation. Microstructural evolution with respect to straining and annealing was examined by X-ray diffraction (XRD) analysis and high-resolution transmission electron microscopy. The XRD analysis revealed that Ti prevails in the consolidated sample and a phase transformation occurs from α phase to ω phase during HPT processing while the total fraction of the ω phase increases with straining. Grain refinement to ~100 nm was achieved through the HPT processing for 100 revolutions as well as the formation of nanograined intermetallics such as Al3Ti, AlTi3 and TiAl. The hardness gradually increases with straining, and further increases by annealing at 573 K for 1.5 h due to the formation of an Al12Mg17 phase despite the fact that the harder ω phase was reversely-transformed to the softer α phase and grains were coarsened to ~450 nm. First-principles calculations show that Al and Mg elements are dissolved into the ω − Ti during HPT processing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. The Mg–Ti (magnesium–titanium) system10.1007/BF02868999 ↗
2. Structural, optical, and electrical properties of MgyTi1−yHx thin films10.1103/PhysRevB.75.205408 ↗
3. Synthesis of Mg–Ti alloy by mechanical alloying10.1023/A:1022889100360 ↗
4. Effect of Li addition on synthesis of Mg–Ti BCC alloys by means of ball milling10.2320/matertrans.48.121 ↗
5. Synthesis of HCP, FCC and BCC structure alloys in the Mg–Ti binary system by means of ball milling10.1016/j.jallcom.2009.01.086 ↗
6. Synthesis of Mg–Ti FCC hydrides from Mg–Ti BCC alloys10.1016/j.jallcom.2008.11.019 ↗
7. Structural and electrochemical hydriding characteristics of Mg–Ti-based alloys prepared by high energy ball milling10.1149/1.3236478 ↗
8. The processing of Mg–Ti for hydrogen storage; mechanical milling and plasma synthesis10.1016/j.ijhydene.2010.08.013 ↗
9. Microstructure and crystal structure of an equimolar Mg–Ti alloy processed by simoloyer high-energy ball mill10.1016/j.powtec.2010.01.014 ↗
10. Formation of a metastable fcc phase and high Mg solubility in the Ti-Mg system by mechanical alloying10.1016/j.powtec.2020.07.053 ↗
11. Formation of metastable phases in magnesium–titanium system by high-pressure torsion and their hydrogen storage performance10.1016/j.actamat.2015.07.060 ↗
12. New procedure to generate stable nanocrystallites by severe plastic deformation10.1016/j.scriptamat.2009.08.016 ↗
13. Consolidation of particles by severe plastic deformation: mechanism and applications in processing bulk ultrafine and nanostructured alloys and composites10.1002/adem.200900332 ↗
14. In-situ production of bulk intermetallic-based nanocomposites andnanostructured intermetallics by high-pressure torsion10.1016/j.scriptamat.2011.11.039 ↗
15. ECAP vs. direct extrusion-techniques for consolidation of ultra-fine Al particles10.1016/j.msea.2008.12.014 ↗
16. Production of nanograined intermetallics using high-pressure torsion
17. Bulk-state reactions and improving the mechanical properties of metals through high-pressure torsion10.2320/matertrans.MF201908 ↗
18. Microstructure and mechanical properties of ultrafine-grained aluminum consolidated by high-pressure torsion10.1016/j.msea.2016.11.076 ↗
19. Mechanical properties and electrical conductivity of ultrafine-grained aluminum consolidated by high-pressure sliding10.1016/j.mtla.2020.100916 ↗
20. Effects of high shearing stress combined with high hydrostatic pressure10.1103/PhysRev.48.825 ↗
21. Using high-pressure torsion for metal processing: Fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
22. Severe plastic deformation under high pressure for enhanced properties of materials: upsizing sample dimensions10.2320/matertrans.MT-M2020074 ↗
23. Concurrent strengthening of ultrafine-grained age-hardenable Al-Mg alloy by means of high-pressure torsion and spinodal decomposition10.1016/j.actamat.2017.04.002 ↗
24. Experimental parameters influencing grain refinement and microstructural evolution during high-pressure torsion10.1016/S1359-6454(02)00466-4 ↗
25. Evolution of microstructure and microtexture in fcc metals during high-pressure torsion10.1007/s10853-006-0628-0 ↗
26. Effect of oxide particles on the stabilization and final microstructure in aluminium10.1016/j.msea.2011.06.071 ↗
27. High-pressure torsion deformation induced phase transformations and formations: new material combinations and advanced properties10.2320/matertrans.MF201930 ↗
28. Microstructural effects and large microhardness in cobalt processed by high pressure torsion consolidation of ball milled powders10.1016/j.actamat.2003.08.006 ↗
29. An evaluation of microstructure and microhardness in copper subjected to ultra-high strains10.1007/s10853-008-2714-y ↗
30. The formation of supersaturated solid solutions in Fe–Cu alloys deformed by high-pressure torsion10.1016/j.actamat.2011.10.044 ↗
31. Powder consolidation of Al–10 wt% Fe alloy by high-pressure torsion10.1016/j.msea.2012.08.029 ↗
32. High-pressure torsion for enhanced atomic diffusion and promoting solid-state reactions in the aluminum–copper system10.1016/j.actamat.2013.02.042 ↗
33. Metallurgical alchemy by ultra-severe plastic deformation via high-pressure torsion process10.2320/matertrans.MF201914 ↗
34. Nanostructured bulk Al90Fe5Nd5 prepared by cold consolidation of gas atomised powder using severe plastic deformation10.1016/S1359-6462(02)00057-X ↗
35. High-pressure torsion of machining chips and bulk discs of amorphous Zr50Cu30Al10Ni1010.2320/matertrans.MB200914 ↗
36. Microstructural characteristics of tungsten-base nanocomposites produced from micropowders by high-pressure torsion10.1016/j.actamat.2012.02.048 ↗
37. Formation of FeNi with L10-ordered structure using high-pressure torsion10.1080/09500839.2014.955546 ↗
38. Microstructure and microhardness of cryomilled bulk nanocrystalline Al–7.5%Mg alloy consolidated by high pressure torsion10.1016/j.scriptamat.2004.04.016 ↗
39. Fabrication and characterization of supersaturated Al-Mg alloys by severe plastic deformation and their mechanical properties10.2320/matertrans.MD200813 ↗
40. Ultrahigh strength and high plasticity in TiAl intermetallics with bimodal grain structure and nanotwins10.1016/j.scriptamat.2012.07.030 ↗
41. Grain refinement and superplasticity in an aluminum alloy processed by high-pressure torsion10.1016/j.msea.2004.11.007 ↗
42. Production of aluminum-matrix carbon nanotube composite using high pressure torsion10.1016/j.msea.2008.02.022 ↗
43. In situ synchrotron X-ray analysis: application of high-pressure sliding process to Ti allotropic transformation10.2320/matertrans.MT-M2020314 ↗
44. Generalized cluster description of multicomponent systems10.1016/0378-4371(84)90096-7 ↗
45. Phase stability and diagrams from first principles10.1557/PROC-291-115 ↗
46. The alloy theoretic automated toolkit: a user guide10.1016/S0364-5916(02)80006-2 ↗
47. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
48. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
49. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
50. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
51. Impurity effects and reaction kinetics of the pressure-induced α → ω transformation in Ti10.1016/0022-3697(77)90031-2 ↗
52. Shock-induced α-ω transition in titanium10.1063/1.1389334 ↗
53. Pressure-induced alpha-to-omega transition in titanium metal: a systematic study of the effects of uniaxial stress10.1016/j.physb.2004.10.030 ↗
54. Processing pure Ti by high-pressure torsion in wide ranges of pressures and strain10.1007/s11661-009-9890-5 ↗
55. Micorstructural evolution in pure aluminum processed by high-pressure torsion10.1016/j.msea.2008.03.055 ↗
56. Characteristics of diffusion in Al-Mg alloys with ultrafine grain sizes10.1080/01418610208235736 ↗
57. Ultra-fast diffusion channels in pure Ni severely deformed by equalchannel angular pressing10.1016/j.actamat.2010.11.063 ↗
58. The presence and nature of vacancy type defects in nanometals detained by severe plastic deformation10.1016/j.msea.2007.06.093 ↗
59. Structural refinement of low alloyed steels during severe plastic deformation10.1016/j.msea.2004.01.096 ↗
60. Cold consolidation of ball-milled titanium powders using high-pressure torsion10.1007/s11661-010-0400-6 ↗
61. Universal plot for hardness variation in pure metals processed by high-pressure torsion10.2320/matertrans.M2009431 ↗
62. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
63. The cleavage strength of polycrystals