Synergistic effect of co-doping of nano-sized ZnO and Nb2O5 on the enhanced nonlinear coefficient of TiO2 varistor with low breakdown voltage
Source abstract
Abstract
Abstract In this study, the enhanced nonlinear coefficient (8.6) of TiO2 varistor with a low breakdown voltage (3.58 V/mm) was achieved by co-doping of nano-sized ZnO and Nb2O5. Meanwhile, the TiO2 varistor exhibited a low leakage current (0.096 mA) and high relative density (98.73%). Further analysis indicated that such improvement could be attributed to the changes in the microstructure including the grain size, pores, defects distribution and grain boundary characteristics in particular. Separately, SEM results demonstrated that the dopant of nano-sized ZnO could promote the sintering process of TiO2 varistor and increase the density of the sample. The XPS and EPR analysis showed that Nb2O5 could help to produce free electrons and Ti3+ ions through donor doping, while ZnO would be beneficial to generate oxygen vacancies and other defect ions through acceptor doping. On the one hand, the defects generated in the grain could result in the grain semiconducting; on the other hand, some defects diffusing to the grain boundary would participate in the formation of grain boundary potential barrier, thus the height of grain boundary barrier was improved. Consequently, the breakdown voltage descended while the nonlinear coefficient ascended.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric properties of ceramics · Multiferroics and related materials · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Varistor ceramics10.1111/j.1151-2916.1999.tb01793.x ↗
2. Influence of sintering temperature on microstructure and electrical properties of Er2O3 added ZnO-V2O5-MnO2-Nb2O5 varistor ceramics10.1016/j.jallcom.2018.03.302 ↗
3. A unique tuning effect of Mg on grain boundaries and grains of ZnO varistor ceramics10.1016/j.jeurceramsoc.2020.12.024 ↗
4. Effects of raw particle size and annealing on microstructure, electrical and mechanical behaviors of ZnO-based varistors10.1016/j.jallcom.2021.159638 ↗
5. High improvement of degradation behavior of ZnO varistors under high current surges by appropriate Sb2O3 doping10.1016/j.jeurceramsoc.2020.08.052 ↗
6. Observation of an electrical breakdown at ZnO Schottky contacts in varistors10.1016/j.jeurceramsoc.2020.10.052 ↗
7. Simultaneously enhanced electrical stability and nonlinearity in ZnO varistor ceramics: role of Si-stabilized δ-Bi2O3 phase10.1016/j.jeurceramsoc.2020.12.008 ↗
8. Improving electrical properties of ZnO–Bi2O3–Sb2O3–MnO2 varistors by doping with pre-synthesized Bi–Si–O phase10.1016/j.jallcom.2020.154692 ↗
9. ZnO varistor manufactured by composite nano-additives10.1016/S0921-5107(02)00492-0 ↗
10. Degradation of SrTiO3-based ceramic varistors induced by water and AC voltages10.1016/j.ceramint.2006.03.005 ↗
11. Effects of Dy2O3 on the electrical properties of a (Nb2O5-Dy2O3-SiO2) co-doped TiO2 varistor10.1007/s11664-020-08727-1 ↗
12. Role of second phase in (Nb,Ce,Si,Ca)-doped TiO2 varistor ceramics10.1016/S0167-577X(03)00173-3 ↗
13. The effect of Ta2O5 and Cr2O3 on the electrical properties of TiO2 varistors10.1016/S0955-2219(01)00441-1 ↗
14. Electrical characterization of ZnO multilayer varistors on the nanometre scale with conductive atomic force microscopy10.1016/j.jeurceramsoc.2010.01.005 ↗
15. Influence of Ta2O5 doping and microwave sintering on TiO2-based varistor properties10.1016/j.ceramint.2014.06.012 ↗
16. Effect of sintering temperature and Ho2O3 on the properties of TiO2-based varistors10.1016/j.ceramint.2018.08.139 ↗
17. Electron-pinned defect-dipoles for high-performance colossal permittivity materials10.1038/nmat3691 ↗
18. Colossal permittivity with ultralow dielectric loss in In + Ta co-doped rutile TiO210.1039/C6TA08337D ↗
19. Enhanced relative permittivity in niobium and europium co-doped TiO2 ceramics10.1016/j.jeurceramsoc.2018.04.026 ↗
20. High-performance giant-dielectric properties of rutile TiO2 co-doped with acceptor-Sc3+ and donor-Nb5+ ions10.1016/j.jallcom.2017.01.333 ↗
21. Preparation, characterization, and giant dielectric permittivity of (Y3+ and Nb5+) co–doped TiO2 ceramics10.1016/j.jeurceramsoc.2017.04.040 ↗
22. Colossal permittivity in ceramics of TiO2 co-doped with niobium and trivalent cation10.1039/C5TA00141B ↗
23. Critical role of interface contact modulation in realizing low-temperature fabrication of efficient and stable CsPbIBr2 perovskite solar cells10.1016/j.cej.2020.124903 ↗
24. Enhanced photoresponse of self-powered perovskite photodetector based on ZnO nanoparticles decorated CsPbBr3 films10.1016/j.solmat.2017.08.014 ↗
25. High performance CsPbBr3 quantum dots photodetectors by using zinc oxide nanorods arrays as an electron-transport layer10.1063/5.0005464 ↗
26. NH4Cl‐modified ZnO for high‐performance CsPbIBr2 perovskite solar cells via low‐temperature process
27. The 1,2-propanediol-sensing properties of one-dimension Tb2O3-modified ZnO nanowires synthesized by water-glycerol binary thermal route10.1016/j.aca.2021.338454 ↗
28. Effect of ZnO doping on microstructural and electrical properties of SnO2–Ta2O5 based varistors10.1016/j.jallcom.2012.02.172 ↗
29. Colossal permittivity properties of Zn,Nb co-doped TiO2 with different phase structures10.1039/C5TC02578H ↗
30. Effect of sinter temperature on the electrical properties of TiO2-based capacitor–varistors10.1016/S0167-577X(02)00996-5 ↗
31. Influence of sintering temperature on semi-conductivity and nonlinear electrical properties of TiO2-based varistor ceramics10.1016/j.mseb.2004.10.021 ↗
32. Effect of thermal treatment on TiO2 varistor properties in different atmospheres10.1016/j.jeurceramsoc.2017.04.021 ↗
33. Synthesis of novel core-shell nanocomposites for fabricating high breakdown voltage ZnO varistors10.1039/c1jm10807g ↗
34. Advances in the synthesis of ZnO nanomaterials for varistor devices10.1039/c3tc00575e ↗
35. Enhanced voltage gradient and energy absorption capability in ZnO varistor ceramics by using nano-sized ZnO powders10.1016/j.jallcom.2020.154252 ↗
36. Role of trivalent acceptors and pentavalent donors in colossal permittivity of titanium dioxide ceramics10.1039/C9TC00578A ↗
37. Influence of GeO2 on the microstructure and electrical properties of TiO2–Nb2O5–Ho2O3 –SiO2 varistors10.1016/j.matchemphys.2020.122638 ↗
38. Two-step sintering of nanocrystalline ZnO compacts: effect of temperature on densification and grain growth10.1111/j.1551-2916.2007.02029.x ↗
39. Sintering behavior and electrical properties of nanosized doped-ZnO powders produced by metallorganic polymeric processing10.1111/j.1151-2916.2001.tb00896.x ↗
40. Ge, GeO2, Ta2O5, BaCO3) co-doping TiO2 varistor ceramics10.1016/j.jallcom.2015.05.112 ↗
41. Microstructure and dielectric properties of (Nb + In) co-doped rutile TiO2 ceramics10.1063/1.4893316 ↗
42. Evidence of linear lattice expansion and covalency enhancement in rutile TiO2 nanocrystals10.1063/1.1790596 ↗
43. Origin of colossal dielectric permittivity of rutile Ti₀.₉In₀.₀₅Nb₀.₀₅O₂: single crystal and polycrystalline10.1038/srep21478 ↗
44. Colossal permittivity in titanium dioxide ceramics modified by tantalum and trivalent elements10.1016/j.actamat.2015.09.046 ↗
45. Colossal dielectric behavior of Co-doped TiO2 ceramics: a comparative study10.1016/j.jallcom.2019.01.356 ↗
46. Raman and x-ray photoelectron spectroscopy study of ferroelectric switching in Pb(Nb,Zr,Ti)O3 thin films10.1063/1.3675479 ↗
47. Electronic absorption by Ti3+ ions and electron delocalization in synthetic blue rutile10.1007/s002690050124 ↗
48. The effect of segregation structure on the colossal permittivity properties of (La0.5Nb0.5)xTi1xO2 ceramics
49. Effect of Ta2O5 in (Ca, Si, Ta)-doped TiO2 ceramic varistors10.1016/j.ceramint.2007.03.005 ↗