Fabrication and characterization of NiTif-SiCf synergistically reinforced (Al3Ti+Al3Ni)-based metallic-intermetallic laminated composite
Source abstract
Abstract
Abstract In this work, a novel NiTif-SiCf synergistically reinforced (Al3Ti+Al3Ni)-based metallic-intermetallic laminated (NiTif-SiCf/(Al3Ti+Al3Ni)-MIL) composite was designed and synthesized using NiTi and SiC fibers, Ti and Al foils with the “Ti (TC4)-NiTif-Al-Ti (TA1)-Al-SiCf-Ti (TC4)” stacked unit by hot pressing sintering process in vacuum. The TA1 foils as barrier (Tib) are favorable to promote the consumption of Al, meanwhile, allow NiTif and SiCf to co-exist in one intermetallic layer. SEM, EDS, XRD and EBSD techniques were employed to investigate microstructure features, phase constituents and growth kinetics of the NiTif-SiCf/(Al3Ti+Al3Ni)-MIL composite. Besides, the mechanical performances of the composite were detected through compressive tests. The results showed that the newly formed phases in the composite consisted of Al3Ti, Al3Ti0.8V0.2 and Al3Ni, which were obtained from the reactions of Ti/Al and NiTif/Al, resulting in the generation of inhomogeneous intermetallic layer. In addition, NiTif and SiCf, lined up respectively, were distributed uniformly in one intermetallic layer along parallel orientation and the oval shaped eutectic areas were in-suit formed around NiTif by reaction of NiTif/Al. While Tib layers were disappeared between NiTif and SiCf due to the complete reaction of Tib/Al, and were replaced by Al3Ti and Al3Ni phases. However, the Al3Ti grains at this area grew abnormally by devouring the surrounding grains after recrystallization, which were harmful to the strength of the composite. Furthermore, the kinetic calculation results showed that the growth of NiTif/Al and Tib/Al interfacial layers are governed solely by chemical reaction mechanism at 630 °C. Moreover, the NiTif-SiCf/(Al3Ti+Al3Ni)-MIL composite acquired superior specific strength and ductility in both perpendicular and parallel directions, which were attributed to the pull-out and breakage of SiCf and NiTif, as well as crack deflection at interfaces.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties · Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Fracture characteristics of metal/intermetallic laminar composites produced by reaction sintering and hot pressing10.1016/0266-3538(95)00072-0 ↗
2. Deformation mechanism in copper-intermetallic layered composites at elevated temperatures
3. Use of Brazilian disk test to determine properties of Metallic-Intermetallic Laminate composites10.1007/s11837-010-0008-8 ↗
4. Fracture behavior of Ti/Al3Ti metal-intermetallic laminate (MIL) composite under dynamic loading10.1016/j.msea.2015.04.025 ↗
5. Effect of layer sequence on the mechanical properties of Ti/TiAl laminates10.1016/j.matdes.2018.02.003 ↗
6. Impact property of TiAl3-Ti laminated composite fabricated from metallic sandwich10.1016/j.compstruct.2019.111379 ↗
7. Effects of sintering temperature and time on defect evolution and compression properties of Ti-Al3Ti laminated composites
8. Microstructural characterisation and mechanical response of laminated Ni-intermetallic composites synthesised using Ni sheets and Al foils10.1016/j.matchar.2012.05.007 ↗
9. Microstructure evolution in pure Ni and Invar-based Metallic-Intermetallic Laminate (MIL) composites10.1016/j.msea.2016.11.033 ↗
10. Interfacial characteristics and bending properties of a Ti6Al4V-Mg3AlZn laminate metal composite10.1016/j.jallcom.2020.156065 ↗
11. Resistance-curve and fracture behavior of Ti-Al3Ti metallic-intermetallic laminated (MIL) composites10.1016/S1359-6454(03)00108-3 ↗
12. The development of residual stresses in Ti6Al4V-Al3Ti metal-intermetallic laminate (MIL) composites[J]10.1016/j.msea.2007.03.069 ↗
13. Finite element analysis of thermal stresses in Ti-Al3Ti metal-intermetallic laminated composites10.1016/j.rinp.2019.102706 ↗
14. Fracture of Ti-Al3Ti metal-intermetallic laminate composites: effects of lamination on resistance-curve behavior10.1007/s11661-005-0092-5 ↗
15. Processing and mechanical behavior of laminated titanium–titanium tri-aluminide (Ti-Al3Ti) composites10.1016/j.msea.2005.06.067 ↗
16. Synthesis and microstructural characterization of Ti-Al3Ti metal-intermetallic laminate (MIL) composites10.1016/j.scriptamat.2004.09.010 ↗
17. Synthesis of metal-intermetallic laminate (MIL) composites with modified Al3Ti structure and in situ synchrotron X-ray diffraction analysis of sintering process10.1016/j.matdes.2018.04.038 ↗
18. Fracture toughness of ceramic-fiber-reinforced metallic-intermetallic laminated (CFR-MIL) composites10.1016/j.msea.2015.10.018 ↗
19. Synthesis and mechanical properties of novel Ti-(SiCf/Al3Ti) ceramic-fiber-reinforced metal-intermetallic-laminated (CFR-MIL) composites10.1016/j.jallcom.2017.06.057 ↗
20. Microstructure evolution and fracture behavior of innovative Ti-(SiCf/Al3Ti) laminated composites10.1016/j.jallcom.2018.01.392 ↗
21. Continuous carbon fiber reinforced Ti/Al3Ti metal-intermetallic laminate (MIL) composites fabricated using ultrasonic consolidation assisted hot pressing sintering10.1016/j.msea.2019.138255 ↗
22. Fabrication, interfacial characterization and mechanical properties of continuous Al2O3, ceramic fiber reinforced Ti/Al3Ti metal-intermetallic laminated (CCFR-MIL) composite10.1016/j.msea.2017.02.024 ↗
23. Continuous Mo fiber reinforced Ti/Al3Ti metal-intermetallic laminated composites10.1016/j.intermet.2019.106544 ↗
24. Fabrication, mechanical properties and damping capacity of shape memory alloy NiTi fiber-reinforced metal-intermetallic-laminate (SMAFR-MIL) composite10.1016/j.matdes.2016.01.130 ↗
25. Improved fracture toughness of NiTi shape memory alloy fiber-reinforced Ti-Al metal-intermetallic-laminate composite10.1016/j.jallcom.2017.12.258 ↗
26. Microstructure and synergistic strengthening mechanisms of carbon nanotubes and Mg2Si nanoparticles hybrid reinforced Mg matrix composites prepared by powder thixoforming10.1016/j.jallcom.2019.152925 ↗
27. Synergistic strengthening of aluminum matrix composites reinforced by SiC nanoparticles and carbon fibers10.1016/j.matlet.2019.127024 ↗
28. Microstructure and synergistic-strengthening efficiency of CNTs-SiCp dual-nano reinforcements in aluminum matrix composites10.1016/j.compositesa.2017.11.013 ↗
29. Microstructure and mechanical properties of continuous ceramic SiC and shape memory alloy NiTi hybrid fibers reinforced Ti-Al metal-intermetallic laminated composite10.1016/j.jallcom.2017.09.267 ↗
30. Synthesis mechanism and strengthening effects of laminated NiAl by Reaction Annealing
31. Interfacial microstructure characterization and mechanical behavior of NiTi fiber reinforced Al3Ti composite10.1016/j.matdes.2018.01.060 ↗
32. Effect of shape-memory alloy NiTi fiber on microstructure and mechanical properties of continuous ceramic Al2O3 fiber-reinforced Ti/Al3Ti metal–intermetallic laminated composite10.1177/2633366X20918884 ↗
33. A study of shape memory alloy NiTi fiber/plate reinforced (SMAFR/SMAPR) Ti-Al laminated composites10.1016/j.jallcom.2016.12.062 ↗
34. High angle boundaries formed by grain subdivision mechanisms10.1016/S1359-6454(97)00027-X ↗
35. EBSD investigation on the interface microstructure evolution of Ti-Al3Ti laminated composites during the preparation process10.1016/j.matchar.2020.110374 ↗
36. Effects of ductile phase volume fraction on the mechanical properties of Ti-Al3Ti metal-intermetallic laminate (MIL) composites10.1016/j.msea.2010.12.087 ↗
37. A study on the formation of intermetallics during the heat treatment of explosively welded Al-Ti multilayers10.1007/s11661-013-2144-6 ↗
38. Study of the microstructure modulation and phase formation of Ti Al3Ti laminated composites10.1016/j.vacuum.2018.09.002 ↗
39. The Kirkendall void formation in Al/Ti interface during solid-state reactive diffusion between Al and Ti10.1016/j.surfin.2017.09.013 ↗
40. Nucleation and growth of TiAl3 intermetallic phase in diffusion bonded Ti/Al Metal Intermetallic Laminate10.1038/s41598-018-35247-0 ↗
41. The evaluation of data obtained with diffusion couples of binary single-phase and multiphase systems10.1016/0001-6160(69)90131-X ↗
42. Microstructure evolution in Fe-based-aluminide metallic-intermetallic laminate (MIL) composites10.1016/j.msea.2015.10.019 ↗
43. Growth kinetics of TiAl3 phase in annealed Al/Ti/Al explosively welded clads10.1016/j.matlet.2017.04.025 ↗
44. Microstructure changes and phase growth occurring at the interface of the Al/Ti explosively welded and annealed joints10.1007/s11665-016-1978-7 ↗
45. Characterization on solid phase diffusion reaction behavior and diffusion reaction kinetic of Ti/Al10.1016/S1875-5372(17)30183-2 ↗
46. Swelling effects and densification during reaction sintering of Ti-Al elemental powder mixtures
47. Microstructure evolution in metal-intermetallic laminate (MIL) composites synthesized by reactive foil sintering in air10.1007/s11661-001-0237-0 ↗
48. The kinetics of TiAl3 formation in explosively welded Ti-Al multilayers during heat treatment10.1007/s11663-016-0710-1 ↗
49. Structural properties of Ti/Al clads manufactured by explosive welding and annealing10.1016/j.matdes.2015.11.087 ↗