An investigation on the mechanical properties of soft magnetostrictive FeCoCr films by nanoindentation
Source abstract
Abstract
Mechanical properties of soft magnetostrictive FeCo-based thin films is one of the critical properties along with their magnetic properties. To fully exploit their potential in magnetic-microelectromechanical (MagMEMs) application, the elastic and inelastic properties as well as the strength need to be considered. This paper presents the mechanical properties of soft magnetostrictive FeCoCr films at varied Cr concentrations from 2.6 to 9.6 at.% fabricated by RF Sputtering. Nanoindentation was performed to determine the hardness, elastic recovery, Young’s modulus, and the yield strength of the FeCo and FeCoCr films. Although the Cr substitutions slightly reduced the hardness and the Young’s Modulus, the yield strength of the films improved, with a maximum of 1014 MPa for 9.6 at.% Cr. This suggests that the Cr atoms were responsible for inhibiting the dislocations motion in the soft magnetostrictive FeCo-based films and helped to overcome the brittleness of the FeCo.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Magnetic Properties and Applications · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Mechanical properties and interface toughness of FeCo thin films on Ti-6Al-4V10.1016/j.msea.2006.02.035 ↗
2. Magnetic materials for MEMS applications10.1088/0022-3727/37/22/R01 ↗
3. Study on advanced multilayered magnetostrictive thin film coating techniques for MEMS application10.1016/j.jmatprotec.2007.11.255 ↗
4. High strength FeCo-V intermetallic alloy: Electrical and magnetic properties10.1557/JMR.2005.0206 ↗
5. Sputter deposition of compositional gradient magnetostrictive FeCo based thin films10.1016/S0304-8853(01)00510-8 ↗
6. Anisotropy and magnetostriction constants of nanostructured FeCo films
7. Effect of the Ni81Fe19 thickness on the magnetic properties of Ni81Fe19/Fe50Co50 bilayers10.1016/j.jmmm.2012.11.022 ↗
8. Mechanical properties of soft magnetic FeCo alloys10.1016/S0921-5093(01)01594-5 ↗
9. Mechanical properties of nanocrystalline and amorphous gallium oxide thin films10.1002/adem.201701033 ↗
10. Structural and mechanical properties of amorphous AlMgB14 thin films deposited by DC magnetron sputtering on Si, Al2O3 and MgO substrates10.1007/s00339-020-3316-z ↗
11. Accurate extraction of the mechanical properties of thin films by nanoindentation for the design of reliable MEMS10.1016/j.microrel.2010.07.119 ↗
12. Measurement of thin film mechanical properties using nanoindentation10.1557/S0883769400041634 ↗
13. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
14. Spherical nanoindentation stress-strain curves10.1016/j.mser.2015.02.001 ↗
15. Determining the mechanical properties of small volumes of material from submicrometer spherical indentations10.1557/JMR.1995.0101 ↗
16. Effect of annealing on magnetostrictive properties of Fe Co alloy thin films10.2320/matertrans.MBW201315 ↗
17. Bozorth · 1951
18. Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques10.1557/JMR.1998.0146 ↗
19. A comparison of nanoindentation pile-up in bulk materials and thin films10.1016/j.tsf.2014.06.060 ↗
20. Fischer-Cripps · 201110.1007/978-1-4419-9872-9 ↗
21. Solt films on hard substrates – nanoindentation of tungsten films on sapphire substrates10.1016/S0921-5093(01)01076-0 ↗
22. The Hall-Petch relationship in nanocrystalline materials10.2320/matertrans1989.38.1033 ↗
23. The Hall–Petch and inverse Hall–Petch relations and the hardness of nanocrystalline metals10.1007/s10853-019-04160-w ↗
24. Effect of Cr addition on the structural, magnetic and mechanical properties of magnetron sputtered Ni–Mn–In ferromagnetic shape memory alloy thin films10.1007/s00339-016-0528-3 ↗