journal article·2021-10

Electrochemical modification and structural characterization of porous PtNi/C catalyst

Liudang Fang, Bin Yang, Jiaxian Cai, Yunhao Feng, Xudong Li, Yan Li

Publisher page

Abstract

Abstract The development of catalysts for high-efficient hydrogen evolution reaction (HER) is important for future sustainable energy conversion. Herein, porous carbon-supported PtNi alloy catalysts were fabricated by ion beam sputtering and ultrasonic-assisted electrochemical corrosion dealloying methods, and their performances toward the catalysis of HER were evaluated. The effects of corrosion dealloying on the hydrogen evolution activity, as well as stability, phase structure, surface composition, and active sites of PtNi alloys were analyzed by various analytical methods combined with orthogonal experiments. The results showed increased catalytic activity of HER by 51.39% after corrosion of the material in 0.2 mol/L H2SO4 at 40 °C for 0.5 h. The hydrogen evolution deteriorated as Pt-loading decreased by 25.83%, and corrosion temperature displayed significant influence. The pore structure of the catalyst surface raised the relative content of the exposed Pt element, and the zero-dimensional defect generated by the Ni atom deletion led to promotion in reaction area and active sites on the catalyst surface. The interplanar spacing of alloys (NiPt) was below 3%−6% of the standard value, and the lattice compressive strain of Pt was the reason that led to improved catalytic performance of PtNi alloy catalysts. The binding energy of the Pt 4f7/2 decreased by 0.74 eV, leading to enhanced electrochemical active sites and promoted hydrogen release.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Nanoporous metals and alloys · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure10.1016/j.compositesb.2016.05.012 ↗
2. Modelling the influence of microstructural morphology and triple junctions on hydrogen transport in nanopolycrystalline nickel10.1016/j.compositesb.2014.09.042 ↗
3. Assessing electrocatalyst hydrogen activity and CO tolerance: comparison of performance obtained using the high mass transport ‘floating electrode’ technique and in electrochemical hydrogen pumps10.1016/j.apcatb.2020.118734 ↗
4. Stability of polymer electrolyte membranes in fuel cells: initial attempts to bridge physical and chemical degradation modes10.1002/fuce.201400024 ↗
5. A review of electrocatalysts with enhanced CO tolerance and stability for polymer electrolyte membarane fuel cells10.1016/j.electacta.2013.01.086 ↗
6. Study of Pt catalyst on graphene and its application to fuel cell10.1016/j.apsusc.2013.04.029 ↗
7. A novel Pt/Cr/Ru/C cathode catalyst for direct methanol fuel cells (DMFC) with simultaneous methanol tolerance and oxygen promotion10.1016/j.ijhydene.2009.09.088 ↗
8. Pt–Ru–Co catalysts for PEMFC synthesized by combustion10.1016/j.catcom.2009.09.010 ↗
9. Effect of carbon supported Pt-Ni catalysts on oxygen reduction for direct methanol fuel cell
10. Metal surface and interface energy electrocatalysis: fundamentals, performance engineering, and opportunities10.1016/j.chempr.2018.05.019 ↗
11. Nanoporous PtCo and PtNi alloy ribbons for methanol electrooxidation10.1016/j.ijhydene.2012.04.041 ↗
12. Morphology and structural stability of Pt-Pd bimetallic nanoparticles
13. Robust tuning metal/carbon heterointerfaces via ketonic oxygen enables hydrogen evolution reaction outperforming Pt/C10.1016/j.apsusc.2020.147080 ↗
14. Amorphous carbon modified nano-sized tungsten carbide as a gas diffusion electrode catalyst for the oxygen reduction reaction10.1039/C5RA15394H ↗
15. Assessment of the FDA backgrounder on platinum in silicone breast implants: implications for public health policy10.2190/HS.38.1.e ↗
16. An alkaline direct borohydride fuel cell with hydrogen peroxide as oxidant10.1016/j.jpowsour.2004.08.059 ↗
17. Geometrical characterization of pyrimidine base molecules adsorbed on Cu(110) surfaces: XPS and NEXAFS studies10.1016/S0039-6028(03)00464-3 ↗
18. Scallion root biotemplate synthesis of mesoporous Co3O4 hierarchical structure for high capacity and long-lived lithium ion battery anode10.1016/j.jallcom.2021.158772 ↗
19. All inorganic solution processed three terminal charge trapping memory device10.1063/1.5089743 ↗
20. Tunable electron affinity with electronic band alignment of solution processed dielectric10.1063/1.4995982 ↗
21. Effect of deposition temperature on bimetallic PtCu membrane electrode catalytic activity toward hydrogen evolution reaction10.1016/j.compositesb.2017.03.035 ↗
22. Enhanced hydrogen evolution properties obtained by ultrasonic-cyclic voltammetry modification of C-supported PtCu thin film catalyst10.1007/s12540-017-6392-7 ↗
23. Low temperature below 200°C solution processed tunable flash memory device without tunneling and blocking layer10.1038/s41467-019-10142-y ↗
24. A fully integrated bluetooth low-energy transmitter in 28 nm CMOS with 36% system efficiency at 3 dBm10.1109/JSSC.2016.2551738 ↗
25. All inorganic spin-coated nanoparticle based capacitive memory devices10.1109/LED.2016.2527689 ↗
26. Tunable electronic trap energy in sol-gel processed dielectrics10.1109/TED.2021.3052445 ↗
27. Controllable surface contact resistance in solution-processed thin-film transistors due to dimension modification10.1088/1361-6641/aba6df ↗
28. Enhanced catalytic properties of Pt-based electrode by doped Cu and Ce10.1088/2053-1591/aa828f ↗
29. Dealloying of platinum-based alloy catalysts: kinetic Monte Carlo simulations10.1016/j.electacta.2013.01.053 ↗
30. Influence of Ni or Pt addition on dealloying behavior of Al2Au-based precursors in a NaOH aqueous solution10.1016/j.jallcom.2013.10.224 ↗
31. Chloride ion effect and alloying effect on dealloying-induced formation of nanoporous AuPt alloy10.1016/j.apsusc.2013.03.080 ↗
32. Application of ultrasound in electrochemistry. An overview of mechanisms and design of experimental arrangement10.1016/j.ultras.2010.08.004 ↗
33. Structure and composition of supported PtCu-LaOx composite multi-layer membrane electrode10.4028/www.scientific.net/AMM.148-149.822 ↗
34. Influence of carbon on molybdenum carbide catalysts for the hydrogen evolution reaction10.1002/cctc.201600107 ↗
35. Nano-engineered intrapores in nanoparticles of PtNi networks for increased oxygen reduction reaction activity10.1016/j.jpowsour.2017.11.002 ↗
36. Structure and electrocatalytic activity of carbon-supported Pt−Ni Alloy nanoparticles toward the oxygen reduction reaction10.1021/jp049034+ ↗
37. Formation of nanometer-sized surface platinum oxide clusters on a stepped Pt(557) single crystal surface induced by oxygen: a high-pressure STM and ambient-pressure XPS study10.1021/nl204242s ↗
38. Performance of polymer electrolyte membrane fuel cells with carbon nanotubes as oxygen reduction catalyst support material10.1016/j.jpowsour.2004.08.042 ↗
39. Acid-durable electride with layered ruthenium for ammonia synthesis: boosting the activity via selective etching10.1039/C9SC01539F ↗
40. Electronic structures and catalytic performance of Pt-electrocatalyst
41. Ionic dispersion of Pt over CeO2 by the combustion method: structural investigation by XRD, TEM, XPS, and EXAFS10.1021/cm0204775 ↗
42. Single-atom vacancy defect to trigger high-efficiency hydrogen evolution of MoS210.1021/jacs.9b12113 ↗
43. Tunable cationic vacancies of cobalt oxides for efficient electrocatalysis in Li–O2 batteries
44. Crystal phase and architecture engineering of lotus-thalamus-shaped Pt-Ni anisotropic superstructures for highly efficient electrochemical hydrogen evolution
45. Noble metal alloy complex nanostructures: controllable synthesis and their electrochemical property10.1039/C4CS00478G ↗
46. Highly crystalline multimetallic nanoframes with three-dimensional electrocatalytic surfaces10.1126/science.1249061 ↗
47. Core–Shell and Nanoporous Particle Architectures and Their Effect on the Activity and Stability of Pt ORR Electrocatalysts10.1007/s11244-013-0178-z ↗