Processing of porous β-type Ti74Nb26 alloys for biomedical applications
Source abstract
Abstract
Abstract Ti74Nb26 alloys with porosities in the range of 45–68% were produced employing Mg space holder technique combined with hot pressing using elemental Ti, Nb and Mg powders. Powder mixtures were hot pressed at 600 °C (below the melting point of Mg, 650 °C) for 1 h under a constant pressure of 50 MPa and flowing argon gas. After hot pressing samples were sintered in a vertical furnace at 1200 °C (above the boiling temperature of Mg, 1090 °C) for 4 h under flowing inert argon gas atmosphere. Evaporation and removal of Mg particles from the samples were carried out during sintering simultaneously. X-ray diffraction and scanning electron microscopy analysis revealed that β phase was the main phase in the microstructure of all the samples. A small amount of α and undissolved pure Nb were also observed. Room temperature Young’s moduli and compressive strength of the specimens increased with decreasing porosity and were in the range of 1.6–14 GPa and 14–136 MPa, respectively. The mechanical properties of the 45%, 54% and 59% porous alloys were sufficient for both cortical and cancellous bone replacement applications. The alloy with a porosity content of 68% demonstrated mechanical properties suitable only for the cancellous bone implants.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Magnesium Alloys: Properties and Applications · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. New developments of Ti-based alloys for biomedical applications10.3390/ma7031709 ↗
2. Development of new metallic alloys for biomedical applications10.1016/j.actbio.2012.06.037 ↗
3. Nickel, cobalt and chromium in consumer products: a role in allergic contact dermatitis?10.1111/j.1600-0536.1993.tb03318.x ↗
4. Oxidative mechanisms in the toxicity of metal ions10.1016/0891-5849(94)00159-H ↗
5. Vanadium and tungsten derivatives as antidiabetic agents10.1385/BTER:88:2:097 ↗
6. Histological and electron microprobe studies of mineralisation in aluminium-related osteomalacia10.1136/jcp.45.6.502 ↗
7. Ti based biomaterials, the ultimate choice for orthopaedic implants-a review10.1016/j.pmatsci.2008.06.004 ↗
8. A review on biomedical titanium alloys: recent progress and prospect10.1002/adem.201801215 ↗
9. Microstructural and mechanical characterization of biomedical Ti-Nb-Zr(Ta) alloys10.1016/j.msea.2006.06.013 ↗
10. Mechanical biocompatibilities of titanium alloys for biomedical applications10.1016/j.jmbbm.2007.07.001 ↗
11. Effects of the microstructural characteristics of a metastable β Ti alloy on its corrosion fatigue properties10.1016/j.ijfatigue.2013.04.010 ↗
12. Effect of thermo-mechanical treatment on mechanical properties and shape memory behavior of Ti-(26-28) at% Nb alloys10.1016/j.msea.2006.02.136 ↗
13. Effects of phase stability and processing on the mechanical properties of Ti-Nb based β Ti alloys10.1016/j.jmbbm.2013.07.007 ↗
14. Corrosion behaviour and biocompatibility evaluation of low modulus Ti-16Nb shape memory alloy as potential biomaterial10.1016/j.matlet.2009.02.062 ↗
15. Microstructure and mechanical behavior of metal injection molded Ti-Nb binary alloys as biomedical material10.1016/j.jmbbm.2013.08.013 ↗
16. Sintering behavior and mechanical properties of a metal injection molded Ti-Nb binary alloy as biomaterial10.1016/j.jallcom.2015.04.039 ↗
17. Beta Ti alloys with low Young’s modulus10.2320/matertrans.45.2776 ↗
18. Mechanical properties of porous Ti-Mo and Ti-Nb alloys for biomedical application by gelcasting10.1016/j.proeng.2012.03.025 ↗
19. Electrochemical synthesis of porous Ti-Nb alloys for biomedical applications10.1016/j.msec.2018.11.025 ↗
20. Tuning microstructure and mechanical properties of open porous TiNb and TiFe alloys by optimization of dealloying parameters10.1016/j.scriptamat.2018.05.029 ↗
21. Production of porous β-type Ti-40Nb alloy for biomedical applications: comparison of selective laser melting and hot pressing10.3390/ma6125700 ↗
22. Porous low modulus Ti40Nb compacts with electrodeposited hydroxyapatite coating for biomedical applications10.1016/j.msec.2013.01.049 ↗
23. Determination of the Young’s modulus of porous ß-type Ti-40Nb by finite element analysis10.1016/j.matdes.2014.07.027 ↗
24. Mechanical and corrosion behavior of new generation Ti-45Nb porous alloys implant devices
25. Powder sintering and characterization of biomedical porous TiNb alloy
26. Corrosion behaviour of porous Ti-39Nb alloy for biomedical applications10.1016/j.corsci.2013.03.007 ↗
27. Effect of ball milling on the properties of the porous Ti-26Nb alloy for biomedical applications
28. Fabrication of porous β-type Ti-40Nb alloys incorporated with TiH2 via powder metallurgy processing route under reducing environment
29. Parameter optimization of microwave sintering porous Ti-23%Nb shape memory alloys for biomedical applications10.1016/S1003-6326(18)64702-8 ↗
30. Mechanical properties and shape memory of porous nitinol10.1016/1044-5803(94)90087-6 ↗
31. Enhanced sintering of TiNi shape memory foams under Mg vapor atmosphere10.1007/s11661-012-1350-y ↗
32. Processing of titanium foams using magnesium spacer particles10.1016/j.scriptamat.2006.11.010 ↗
33. Processing of porous TiNi alloys using magnesium as space holder10.1016/j.jallcom.2008.11.141 ↗
34. Characterization of Ti-6Al-4V alloy foams synthesized by space holder technique10.1016/j.msea.2011.01.008 ↗
35. Magnesium and its alloys as orthopedic biomaterials: a review10.1016/j.biomaterials.2005.10.003 ↗
36. Phase transformation behavior of porous TiNi alloys produced by powder metallurgy using magnesium as a space holder10.1007/s11661-011-0714-z ↗
37. Gibson · 1999