journal article·2021-03Open access

Thermophysical properties of porous Ti2AlC and Ti3SiC2 produced by powder metallurgy

S.A. Tsipas, E. Tabares, Thomas Weissgaerber, Thomas Hutsch, Federico Sket, B. Velasco

Abstract

The physicochemical properties of porous Ti2AlC and Ti3SiC2 MAX phase compounds with controlled porosity and grain size obtained by powder metallurgy techniques was studied in depth in order to access their suitability of applications such as catalytic devices on vehicles, heat exchangers or impact resistant structures. The study was performed on isostatic consolidated samples with different amount (20-60 vol%) and size of space holder (250-1000 µm) and in samples without space holder. Oxidation tests were performed at different temperatures for each material depending on their maximum service temperature. In order to understand the oxidation mechanism, oxidation kinetics were analysed to determine the influence of size and amount of porosity in each case. In addition, the microstructure and composition of the oxide layers formed after the tests were analysed by scanning electron microscopy (SEM). Electrical and thermal conductivity where studied at room temperature and at temperature up to 1000 degrees C. The effect of pore size and cell wall thickness is discussed. Permeability of foams was also measured. The effect of micro porosity and macro porosity on permeability is discussed. The coefficient of thermal expiation was also measured for all foams produced. It is established that these porous MAX phases have suitable properties for their use as catalytic substrates, heat exchanges, high temperature filters or volumetric solar receivers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: MXene and MAX Phase Materials · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. MN+1AXN phases: a new class of solids; thermodynamically stable nanolaminates10.1016/S0079-6786(00)00006-6 ↗
2. Progress in research and development on MAX phases: a family of layered ternary compounds10.1179/1743280410Y.0000000001 ↗
3. Barsoum · 2013
4. The MAX phases: unique new carbide and nitride materials10.1511/2001.28.334 ↗
5. Nanolaminated ternary carbide (MAX phase) materials for high temperature applications10.1016/j.ijrmhm.2017.11.038 ↗
6. Studying the oxidation of Ti2AlC MAX phase in atmosphere: a review10.1016/j.ijrmhm.2016.07.006 ↗
7. Kinetic aspects of Ti2AlC MAX phase oxidation10.1007/s11085-015-9526-7 ↗
8. Oxidation Of Ti3SiC2 in air10.1149/1.1837846 ↗
9. Layered machinable and electrically conductive Ti2AlC and Ti3AlC2 Ceramics: a Review10.1016/S1005-0302(10)60064-3 ↗
10. Oxidation behaviour of Ti3SiC2-based ceramic at 900–1300 °C in air10.1016/S0010-938X(00)00142-6 ↗
11. Oxidation behavior of Ti3SiC2 at high temperature in air10.1016/S0921-5093(02)00210-1 ↗
12. High temperature oxidation resistance of Ti3SiC2 in air and low oxygen atmosphere10.1111/ijac.12746 ↗
13. Oxidation behaviour of the MAX-phases Ti2AlC and (Ti, Nb)2AlC at elevated temperatures with and without fluorine treatment10.1016/j.jeurceramsoc.2019.07.040 ↗
14. Oxidation mechanisms in bulk Ti2AlC: influence of the grain size10.1016/j.jeurceramsoc.2020.01.042 ↗
15. High-temperature oxidation behavior of Ti3AlC2 in air10.1016/S1003-6326(06)60318-X ↗
16. Cyclic oxidation of Ti3AlC2 at 1000–1300 °C in air10.1016/j.corsci.2010.09.033 ↗
17. High-performance Cr2AlC MAX phase coatings: oxidation mechanisms in the 900–1100 °C temperature range10.1016/j.corsci.2020.108492 ↗
18. Electrical transport, thermal transport, and elastic properties of M2AlC (M=Ti, Cr, Nb, and V)10.1103/PhysRevB.72.115120 ↗
19. Thermal and electrical properties of Nb (2) AIC, (Ti, Nb)(2) AlC and Ti(2) AlC10.1007/s11661-002-0262-7 ↗
20. High temperature physical and mechanical properties of large-scale Ti2AlC bulk synthesized by self-propagating high temperature combustion synthesis with pseudo hot isostatic pressing10.1016/j.jeurceramsoc.2013.04.014 ↗
21. Electronic and thermal properties of Ti[sub 3]Al(C[sub 0.5],N[sub 0.5])[sub 2], Ti[sub 2]Al(C[sub 0.5],N[sub 0.5]) and Ti[sub 2]AlN
22. Synthesis and characterization of a remarkable ceramic: Ti3SiC210.1111/j.1151-2916.1996.tb08018.x ↗
23. Synthesis of Ti3SiC2 polycrystals by hot-isostatic pressing of the elemental powders10.1023/A:1006664416845 ↗
24. Microstructure and properties of Ti3AlC2 prepared by the solid-liquid reaction synthesis and simultaneous in-situ hot pressing process10.1016/S1359-6454(02)00117-9 ↗
25. Electrical conductivity, thermopower, and Hall effect of Ti3AlC2,Ti4AlN3, and Ti3SiC210.1103/PhysRevB.62.10194 ↗
26. Electronic properties of Ti3SiC2 -based solid solutions10.1103/PhysRevB.58.16042 ↗
27. X-ray absorption spectroscopy, EELS, and full-potential augmented plane wave study of the electronic structure of Ti2AlC, Ti2AlN, Nb2AlC, and (Ti 0.5Nb 0.5) 2AlC10.1103/PhysRevB.71.024105 ↗
28. On the heat capacities of M2AlC (M=Ti,V,Cr) ternary carbides10.1063/1.2191744 ↗
29. Thermal properties of Ti3SiC210.1016/S0022-3697(98)00313-8 ↗
30. First-principles phonon calculations of thermal expansion in Ti 3SiC2, Ti3AlC2, and Ti3GeC210.1103/PhysRevB.81.174301 ↗
31. Characterization of thermal performance, flux transmission performance and optical properties of MAX phase materials under concentrated solar irradiation10.1016/j.solmat.2018.03.018 ↗
32. Compatibility of SiC--and MAX phase-based ceramics with a KNO3-NaNO3 molten solar salt10.1016/j.solmat.2019.03.007 ↗
33. Preparation of reticulated MAX-phase support with morphology-controllable nanostructured ceria coating for gas exhaust catalyst devices10.1111/j.1551-2916.2010.03776.x ↗
34. Cr2AlC MAX phase foams by replica method10.1016/j.matlet.2019.01.026 ↗
35. Processing and characterization of porous Ti2AlC with controlled porosity and pore size10.1016/j.actamat.2012.07.052 ↗
36. Microstructure, thermal conductivity and simulation of elastic modulus of MAX-phase (Ti2AlC) gel-cast foams10.1016/j.jeurceramsoc.2018.04.012 ↗
37. High-temperature oxidation and compressive strength of Cr2AlC MAX phase foams with controlled porosity10.1111/jace.15224 ↗
38. Electrode materials based on a Ti-Al-C MAX phase10.1134/S0020168516100174 ↗
39. Erosion behavior of a Cu-Ti3AlC2 cathode by multi-electric arc10.3390/ma12182947 ↗
40. N. Christinsen, R. Kungas, B.P.G. Blennow, Tullmar EP 2 945 207 A101 MAX Phase Materials for Use in Solid Oxide Fuel Cells and Solid Oxide Electrolysis Cells 207 A101EP 2 2015 945.207 A101.
41. Environmental resistance of a Ti2AlC-type MAX phase in a high pressure burner rig10.1016/j.jeurceramsoc.2016.07.038 ↗
42. MAX phase foams produced via powder metallurgy process using water soluble space holder10.1179/0032589915Z.000000000226 ↗
43. MAX phase Ti2AlC foams using a leachable space-holder material10.1016/j.jallcom.2015.05.235 ↗
44. Influence of porosity on elastic properties of Ti2AlC and Ti3SiC2 MAX phase foams10.1016/j.jallcom.2018.06.027 ↗
45. High-temperature oxidation behavior of Ti2AlC in air10.1023/A:1023092027697 ↗
46. Cyclic oxidation of Ti3AlC2 at 1000–1300 °C in air10.1016/j.corsci.2010.09.033 ↗
47. The Forchheimer equation: a theoretical development10.1007/BF00141261 ↗
48. Fabrication and characterization of pure porous Ti3SiC2 with controlled porosity and pore features10.1016/j.matlet.2014.05.198 ↗
49. High-temperature oxidation behavior of Ti3Si(1-x)AlxC2 in air10.1016/S1003-6326(06)60238-0 ↗
50. High-temperature oxidation behavior of Ti2AlC in air10.1023/A:1023092027697 ↗
51. Macro-porous Ti2AlC MAX-phase ceramics by the foam replication method10.1016/j.ceramint.2015.06.038 ↗
52. Relative Ti2AlC Scale Volatility under 1300 °C combustion conditions10.3390/coatings10020142 ↗
53. Liu · 2014
54. Durability of YSZ coated Ti2AlC in 1300 °C high velocity burner rig tests10.1111/jace.17154 ↗
55. Cr2AlC MAX phase as bond coat for thermal barrier coatings: Processing, testing under thermal gradient loading, and future challenges10.1111/jace.16935 ↗
56. Gibson · 2014
57. A three-parameter Kozeny-Carman generalized equation for fractal porous media10.1016/j.ces.2010.04.006 ↗
58. Permeability and effective porosity of porous media10.1103/PhysRevE.56.3319 ↗
59. Flow laws in metal foams: compressibility and pore size effects10.1007/s11242-007-9169-5 ↗
60. Morphological determination of pore connectivity as a function of pore size using serial sections10.1111/j.1365-2389.1997.tb00203.x ↗
61. Effect of porosity on the thermal expansion coefficient: a discussion of the paper Effects of mineral admixtures on the thermal expansion properties of hardened cement paste10.1016/j.conbuildmat.2010.03.006 ↗
62. Effects of mineral admixtures on the thermal expansion properties of hardened cement paste10.1016/j.conbuildmat.2010.02.012 ↗