Synthesis, crystal structures, phase width and electrochemical performances of γ-brass type phases in Cu–Zn–Sn system
Source abstract
Abstract
Abstract Cu–Zn–Sn ternary phases were synthesized by high-temperature solid-state synthesis. Structural characterization was performed by means of X-ray diffraction and energy dispersive X-ray analysis. The ternary compounds were found to adopt γ-brass (Cu5Zn8) structure type. X-ray diffraction analyses show that γ-brass type phases in Cu–Zn–Sn system crystallize in P 4 ¯ 3m space group (cP52, 215). Ternary Cu–Zn–Sn γ-brass type phases exist in an extended homogeneity range. The phase-pure ternary compounds are found to exist for compositions ranging between 48 and 70 atomic % Cu, between 15 and 46 atomic % Zn, and between 5 and 15 atomic % Sn. The phase width arises due to the statistical distribution of constituent elements, which is typical for intermetallic compounds. The Cu–Zn–Sn γ-brass structures consist of two compositionally different γ-clusters (consists of the four polyhedral shells: inner tetrahedron (IT), outer tetrahedron (OT), octahedron (OH), cuboctahedron (CO)) centered at high symmetric sites in a primitive cubic unit cell. The γ-brass cluster (A) at (0,0,0) site is Cu-rich, chemically more ordered than the cluster (B) present at (½,½,½). For A cluster, only IT site is mixed (Zn/Sn) and OT, OH, CO sites are exclusively occupied by Cu, throughout the entire homogeneity range. The B cluster is heavily disordered; only the OT site is exclusively occupied by Cu all over the phase region. For Zn rich region IT site is fully occupied by Zn, then mixed occupied between Cu and Zn at intermediate Zn-concentration, and completely occupied by Cu at Cu-rich side of the Cu–Zn–Sn phases. OH site is fully occupied by Zn at Zn rich side. The same site is mixed occupied between Cu, Zn and Sn for the composition at intermediate Zn-concentration and Cu/Sn at Zn poor side. CO site of B cluster is occupied by Zn and Sn. The electrochemical properties of four Cu–Zn–Sn based samples with different compositions were studied as an anode material for lithium and sodium-ion storage using galvanostatic charge-discharge cycles. Li-ion half-cells transpired excellent retention of charge capacity (>80%) with more than 99% Coulombic efficiency. The results further encourage the prospects of ternary Cu–Zn–Sn alloy anodes to utilize in real energy storage applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Nanoporous metals and alloys · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Electrochemical energy conversion on intermetallic compounds: a review10.1021/acscatal.8b04566 ↗
2. Intermetallics in catalysis: an exciting subset of Multimetallic catalysts10.1016/j.cattod.2018.05.048 ↗
3. Recent progresses on thermoelectric zintl phases: structures, materials and optimization10.1016/j.jssc.2018.11.030 ↗
4. High-efficiency half-heusler thermoelectric Modules enabled by self-propagating Synthesis and topologic structure optimization10.1039/C9EE02228G ↗
5. Review of the structural, magnetic and Magnetocaloric properties in ternary rare earth RE2T2X type intermetallic compounds10.1016/j.jallcom.2019.02.175 ↗
6. Magnetic and Magnetocaloric properties of the equiatomic europium intermetallics EuAgZn, EuAgCd, EuPtZn and EuAuCd10.1016/j.intermet.2020.106765 ↗
7. Lattice dynamics, mechanical stability and electronic structure of Fe-based heusler semiconductors10.1038/s41598-018-37740-y ↗
8. ReGaGe2: an intermetallic compound with semiconducting properties and localized bonding10.1039/C9CC02563D ↗
9. Family of Mo 4 Ga 21 -based superconductors10.1021/acs.chemmater.0c02311 ↗
10. Superconducting properties of in doped ZrNi 2 Ga 1−x in X10.1016/j.ssc.2019.01.015 ↗
11. Elphick · 2020
12. Corrosion behavior of Sn-based lead-free solder alloys: a review10.1007/s10854-020-03540-2 ↗
13. A critical review on performance, Microstructure and corrosion resistance of Pb-free solders10.1016/j.measurement.2018.12.051 ↗
14. Sn-based intermetallic compounds for Li-ion batteries: structures, lithiation mechanism, and electrochemical performances10.1002/eem2.12016 ↗
15. Antimony-based intermetallic compounds for lithium-ion and sodium-ion batteries: Synthesis, construction and application10.1007/s12598-017-0899-4 ↗
16. Electro-deposition preparation of self-standing Cu-Sn alloy anode electrode for lithium ion battery10.1016/j.jallcom.2018.10.207 ↗
17. Effect of atomic ordering on the activity for Methanol and formic acid oxidation of Pt-based electrocatalysts10.1002/ente.201800553 ↗
18. The influence of atomic order on the magnetic and structural properties of the ferromagnetic shape Memory compound Ni2MnGa10.1088/0953-8984/15/22/317 ↗
19. Influence of atomic ordering on the Fe2Nb antiferromagnetic alloy10.1016/j.jmmm.2013.11.031 ↗
20. Machinability evaluation of low-lead brass alloys10.1016/j.promfg.2020.01.102 ↗
21. Effect of addition of tin on the Microstructure and Machinability of α-brass10.1080/02670836.2018.1435484 ↗
22. Atomic ordering of two neighboring transition metals - Cu and Zn from binary CuZn to ternary Cu3ZnSb10.1021/acs.inorgchem.8b01518 ↗
23. Chemical substitution of Zn in the structure of ordered Cu6Zn2Sb2: a structural and theoretical study10.1016/j.solidstatesciences.2020.106333 ↗
24. Electrochemical alloying/dealloying mechanism of ternary intermetallic Cu6-δZn2+δSb2 (δ = 0 and 1) as anode for Li-ion and Na-ion batteries10.1016/j.jssc.2020.121660 ↗
25. Electrodeposition of pure phase SnSb exhibiting high stability as a sodium-ion battery anode10.1039/C9CC00001A ↗
26. (Cu6Sn5)1-xCx active/inactive nanocomposite negative electrodes for Na-ion batteries10.1016/j.electacta.2013.08.120 ↗
27. Nanocolumnar structured porous Cu-Sn thin film as anode material for lithium-ion batteries10.1021/am405994b ↗
28. Sn-Cu nanocomposite anodes for rechargeable sodium-ion batteries10.1021/am4023994 ↗
29. Electrochemical investigation of Sn-Co alloys as anode for Na-ion batteries10.1016/j.jallcom.2018.11.410 ↗
30. Characterisation of lithium-ion battery anodes fabricated via in-situ Cu6Sn5 growth on a copper current collector10.1016/j.jpowsour.2019.01.034 ↗
31. Anodes for sodium ion batteries based on tin-germanium-antimony alloys10.1021/nn4063598 ↗
32. Multilayered Sn-Zn-Cu alloy thin-film as negative electrodes for advanced lithium-ion batteries10.1016/j.jpowsour.2004.10.006 ↗
33. Performance enhancement of Sn–Sb–Co alloy film anode for lithium-ion batteries via post electrodissolution treatment10.1007/s10800-014-0781-0 ↗
34. Sn-Bi-Sb alloys as anode materials for sodium ion batteries10.1039/C7TA01443K ↗
35. Anodes for batteries based on tin - germenium - antimony alloys
36. Toward efficient Li-ion cells at high temperatures: example of TiSnSb10.1016/j.jpowsour.2018.04.068 ↗
37. Insight on the failure mechanism of Sn electrodes for sodium-ion batteries: evidence of pore formation during sodiation and crack formation during desodiation10.1021/acsaem.8b01934 ↗
38. An attempt to synthesize Sn-Zn-Cu alloy nanoparticles10.1016/j.matlet.2016.04.192 ↗
39. Phase equilibria of the Sn-Zn-Cu ternary system10.1016/j.actamat.2006.01.014 ↗
40. Neutron diffraction of Cu-Zn-Sn ternary alloys: non-invasive assessment of the compositions of historical bronze/brass copper ternary alloys10.1107/S1600576716017805 ↗
41. The structure of the δ-phase in the Cu-Sn system. A phase of γ-brass type with an 18 Å superstructure10.3891/acta.chem.scand.30a-0187 ↗
42. γ-Brasses with F Cells10.1107/S0567740877002556 ↗
43. 2008
44. Crystallographic computing system JANA2006: general features
45. SUPERFLIP - a computer program for the solution of crystal structures by charge flipping in arbitrary dimensions10.1107/S0021889807029238 ↗
46. 2011
47. Rietveld refinement guidelines10.1107/S0021889898009856 ↗
48. First-principles calculations and experimental studies of Sn-Zn alloys as negative electrode materials for lithium-ion batteries10.1007/s12598-011-0217-5 ↗
49. Quasi-intercalation and facile amorphization in layered ZnSb for Li-ion batteries10.1002/adma.200901427 ↗
50. Sodium storage and electrode dynamics of tin–carbon composite electrodes from bulk precursors for sodium-ion batteries10.1002/adfm.201900790 ↗
51. Polycrystalline zinc stannate as an anode material for sodium-ion batteries10.1039/C5TA02734A ↗