journal article·2020-12

Effect of boron on isothermal oxidation behavior of a nickel-base superalloy with high Al and Ti contents

Guangdi Zhao, Ximin Zang, Feng Qi

Publisher page

Abstract

Abstract The influence of boron on the oxidation resistance of conventionally cast U720Li alloy was investigated at 1130 °C and analyzed by X-ray diffraction (XRD), scanning electron microscope (SEM) equipped with energy dispersive X-ray spectroscopy (EDX) and electron probe microanalysis (EPMA). It has been found that the boron-undoped and -doped alloys all obey a super-parabolic rate law, but the oxidation rate is obviously increased by the boron addition. These alloys all show non-uniform oxidation between dendritic and interdendritic areas due to the serious microsegregation, while the oxide scale morphology of the high-boron alloy is quite different from that of the boron-undoped alloy. For boron-doped alloys, in the initial stage of oxidation the outward diffusion of boron from borides formed in the interdendritic region results in the formation of discontinuous and non-uniform B-rich oxide layers beneath and inside the Cr2O3 layer, while as the oxidation proceeds further boron can also transfer from the B-rich oxide to outer layers which eventually leads to disappearance of the B-rich oxide layers. The formation of B-rich oxide layers destroys the continuity of Cr2O3 layer and decomposition of B-rich oxide layers makes Cr2O3 layer more porous, which significantly reduce the protective property of the Cr2O3 layer and in turn decrease the oxidation resistance. Moreover, the eutectic (γ + γ′) highly enriched in Ti, Al is prone to be oxidized and form a thicker scale than the other regions, and hence the significant increase of its precipitation with boron addition also contributes to increasing the oxidation rate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Reed · 2008
2. Sims · 1987
3. Quantification of the minor precipitates in UDIMET™ alloy720(LI) using electrolytic extraction and X-ray diffraction 110.1016/S0921-5093(97)00728-4 ↗
4. The role of boron in modifying the solidification and microstructure of nickel-base alloy U720Li10.1016/j.jallcom.2016.05.331 ↗
5. Solidification behavior of Ni-base superalloy Udimet 720Li10.1016/j.jallcom.2015.09.001 ↗
6. Effect of boron additions on the microstructure and transverse properties of a directionally solidified superalloy10.1016/j.msea.2007.05.082 ↗
7. Effect of Zr and B on castability of Ni-based superalloy IN79210.1007/s11661-004-0308-0 ↗
8. Impurities and trace elements in nickel-base superalloys10.1179/imr.1976.21.1.1 ↗
9. Bradley · 1979
10. Microstructure of nickel-based superalloys10.1002/pssb.19690350102 ↗
11. Effects of B, C, and Zr on the structure and properties of a P/M nickel base superalloy10.1007/BF02646223 ↗
12. Effect of B and Cr on the high temperature oxidation behaviour of novel γ/γ′-strengthened Co-base superalloys10.1016/j.corsci.2011.04.020 ↗
13. High temperature oxidation of γ/γ′-strengthened Co-base superalloys10.1016/j.corsci.2011.02.033 ↗
14. Boron depletion in a nickel base superalloy induced by high temperature oxidation10.1007/s11085-015-9529-4 ↗
15. The effect of boron on oxide scale formation in a new polycrystalline superalloy10.1016/j.scriptamat.2016.09.013 ↗
16. Effects of heat treatment and chemistry on the long-term phase stability of a high strength nickel-based superalloy
17. Influence of long term exposure in air on microstructure, surface stability and mechanical properties of Udimet 720Li
18. Sun · 2016
19. Eta phase and boride formation in directionally solidified Ni-base superalloy IN792+ Hf10.1007/s11661-007-9090-0 ↗
20. The minor precipitation at the final stage of U720Li solidification10.1007/s40195-016-0414-1 ↗
21. High temperature oxidation and γ′ depletion in the single-crystal superalloy PWA 1484, Mater10.1080/09603409.2016.1180276 ↗
22. Oxidation of Ni-Cr-Al alloys between 1000 and 1200 C10.1149/1.2407837 ↗
23. Some limiting factors in the use of alloys at high temperatures10.1007/BF00603485 ↗
24. Oxidation behavior of a single-crystal Ni-base superalloy in air at 900, 1000 and 1100° C10.1007/s11085-006-9016-z ↗
25. High temperature oxidation behavior of Ni-based superalloy GH586 in air10.1007/s12598-016-0823-3 ↗
26. Oxidation behavior of a new Ni-base superalloy in air at 850° C and 950° C
27. Oxidation behavior of a single-crystal Ni-base superalloy between 900 and 1000°C in air10.1016/j.jallcom.2009.10.261 ↗
28. Birchenall · 1962
29. Growth and microstructure of α-Al2 O 3 on Ni-Al alloys: internal precipitation and transition to external scale10.1149/1.2129964 ↗
30. Some aspects of the occurrence of boron in alloy steels10.1179/msc.1977.11.7.225 ↗
31. The effect of grain boundary segregation of boron in cast alloy 718 on HAZ microfissuring—a SIMS analysis10.1016/S1359-6454(97)00017-7 ↗
32. The diffusion coefficient of vacancy-boron complexes during the segregation of boron atoms to grain boundaries10.4028/www.scientific.net/MSF.94-96.519 ↗
33. Knacke · 1991
34. Turbostratic1 boron nitride, thermal transformation to ordered-layer-lattice boron nitride10.1021/ja00883a001 ↗
35. The oxidation kinetics of zirconium diboride and zirconium carbide at high temperatures10.1149/1.2426263 ↗
36. Transformation mechanism of (γ + γ′) and the effect of cooling rate on the final solidification of U720Li alloy10.1007/s40195-017-0566-7 ↗