Adjusting the microwave absorption properties of carbon nanotube composites with ferrocene by annealing under different conditions
Source abstract
Abstract
Abstract Carbon composites with magnetic metal nanoparticles are promising high-performance microwave absorbers with both dielectric loss and magnetic loss. Ferrocene has been sublimed into the evacuated multi-walled carbon nanotubes (MWCNTs) and then annealed under different atmosphere to obtain different structures with different microwave absorption features. A large amount of Fe3C Yolk-shell structures with a small amount of low encapsulated Fe3C@MWCNTs have been obtained after annealing at hydrogen atmosphere. A large amount of highly encapsulated α-Fe@MWCNTs and rod-shaped structures composed of Fe3C nanoparticles with a small amount of Fe7C3@MWCNTs have been produced after annealing under ferrocene atmosphere. The structures have been characterized by transmission electron microscope, Raman, and X-ray diffraction. The maximum reflection loss of the as-produced Fe3C yolk-shell structures with a small amount of Fe3C@MWCNTs was measured to be up to −35.1 dB at 10.48 GHz with a thickness of 2 mm. The reflection loss values were detected to be less than −10 dB in the range of 8.9–11.4 GHz. However, multiple absorption bands have been observed by sample annealing under ferrocene atmosphere at 4.5, 9.4, 13.4 GHz with corresponding reflection loss values of −3.1, −4.8 and −12.6 dB with a thickness of 2 mm, respectively. The microwave absorption properties have been demonstrated to be significantly affected by the annealing atmospheres and temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies · Metamaterials and Metasurfaces Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Synthesis of an electromagnetic wave absorber for high-speed wireless communication10.1021/ja807943v ↗
2. Wood-based straightway channel structure for high performance microwave absorption10.1016/j.carbon.2017.07.088 ↗
3. Microwave absorption properties in absorbers for mobile phones10.3938/jkps.52.1850 ↗
4. Microwave absorption enhancement and complex permittivity and permeability of Fe encapsulated within carbon nanotubes10.1002/adma.200306460 ↗
5. High densities of magnetic nanoparticles supported on graphene fabricated by atomic layer deposition and their use as efficient synergistic microwave absorbers10.1007/s12274-014-0432-0 ↗
6. Microwave absorption properties of one thin absorber based on carbonyl-iron powder10.4028/www.scientific.net/MSF.675-677.861 ↗
7. Fabrication of hierarchical graphene@Fe3O4@SiO2@polyaniline quaternary composite and its improved electrochemical performance10.1016/j.jallcom.2015.02.062 ↗
8. Design of porous C@Fe3O4 hybrid nanotubes with excellent microwave absorption10.1039/C5CP06687E ↗
9. Metal organic framework-derived Fe/C nanocubes toward efficient microwave absorption10.1039/C5TA01457C ↗
10. One-step path to highly crystalline multi-walled carbon nanotubes with large inner diameters
11. Easy gas-flow-induced CVD synthesis and tunable electromagnetic characteristics of centipede-shaped iron/cementite/multiwalled carbon nanotube (Fe/Fe3C/MWCNT) heterostructures10.1016/j.surfcoat.2015.10.058 ↗
12. Iron-filled carbon nanotube arrays obtained by floating catalyst chemical vapor deposition10.4028/www.scientific.net/AMR.123-125.711 ↗
13. The origin of long-period lattice spacings observed in iron-carbide nanowires encapsulated by multiwall carbon nanotubes10.1017/S1431927613001918 ↗
14. Growth and microwave absorbing properties of Fe/Fe3C-filled carbon nanotube composites
15. Investigation of the microwave-absorbing properties of Fe-filled carbon nanotubes10.1016/j.matlet.2007.01.077 ↗
16. Microwave absorbing property of Fe-filled carbon nanotubes synthesized by a practical route10.1016/j.mseb.2006.12.018 ↗
17. Fe3O4@polyaniline yolk-shell micro/nanospheres as bifunctional materials for lithium storage and electromagnetic wave absorption10.1016/j.apsusc.2017.09.118 ↗
18. Yolk-shell Ni@SnO2 Composites with a designable interspace to improve the electromagnetic wave absorption properties10.1021/acsami.6b10886 ↗
19. Hierarchical Fe3O4@TiO2 yolk-shell microspheres with enhanced microwave-absorption properties10.1002/chem.201203557 ↗
20. Optimizing the electromagnetic wave absorption performances of designed Co3Fe7@C Yolk-shell structures10.1021/acsami.8b08040 ↗
21. The construction of carbon-coated Fe3O4 yolk-shell nanocomposites based on volume shrinkage from the release of oxygen anions for wide-band electromagnetic wave absorption10.1016/j.jcis.2017.10.018 ↗
22. Synthesis and transformation of linear adamantane assemblies inside carbon nanotubes10.1021/nn303461q ↗
23. Cobalt/polypyrrole nanocomposites with controllable electromagnetic properties10.1039/C4NR06978A ↗
24. Enhanced cycling stability of ring-shaped phosphorus inside multi-walled carbon nanotubes as anodes for lithium-ion batteries10.1039/C7TA07683E ↗
25. In situ synthesis of carbon nanotube hybrids with alternate MoC and MoS2 to enhance the electrochemical activities of MoS210.1021/acs.nanolett.5b01579 ↗
26. Pseudo-topotactic conversion of carbon nanotubes to T-carbon nanowires under picosecond laser irradiation in methanol10.1038/s41467-017-00817-9 ↗
27. Carbon nanotube hybrids with MoS2 and WS2 synthesized with control of crystal structure and morphology10.1016/j.carbon.2014.12.090 ↗
28. WS2 nanoflowers on carbon nanotube vines with enhanced electrochemical performances for lithium and sodium-ion batteries10.1016/j.jallcom.2018.07.008 ↗
29. Changing the phosphorus allotrope from a square columnar structure to a planar zigzag nanoribbon by increasing the diameter of carbon nanotube nanoreactors10.1021/acs.nanolett.9b04741 ↗
30. Rock-salt and helix structures of silver iodides under ambient conditions10.1093/nsr/nwz041 ↗
31. Evidence of diamond nanowires formed inside carbon nanotubes from diamantane dicarboxylic acid10.1002/anie.201209192 ↗
32. Assembly of ring-shaped phosphorus within carbon nanotube nanoreactors10.1002/anie.201611740 ↗
33. Preferential synthesis and isolation of (6,5) single-wall nanotubes from one-dimensional C60 coalescence10.1039/c1nr10602c ↗
34. Chirally selective growth and extraction of single-wall carbon nanotubes via fullerene nano-peapods10.1039/c3ra43133a ↗
35. Non destructive analysis of carbon nanotube based strain sensor using Raman analysis and Raman mapping10.1177/096369351402300201 ↗
36. In situ Raman spectroscopy studies on time-dependent inner tube growth in ferrocene-filled large diameter single-walled carbon nanotubes10.1002/pssb.201451166 ↗
37. Monitoring dopants by Raman scattering in an electrochemically top-gated graphene transistor10.1038/nnano.2008.67 ↗
38. Complex permeability and permittivity and microwave absorption of ferrite-rubber composite at X-band frequencies10.1109/20.278872 ↗
39. Application of ferrite to electromagnetic wave absorber and its characteristics10.1109/TMTT.1971.1127446 ↗
40. Hong · Solid State Phys. · 2013 · 64 · 281