journal article·2020-09

Effect of controlled rolling temperature on microstructure and properties of Mg-9Li-1Zn alloy sheet

Yansong Shi, Qinghai Shu, Shuai Zhao, Haoming Zou, Shaohua Jin, Kun Chen, Lijie Li, Xijuan Lv

Publisher page

Abstract

Abstract In this research, the rolling of Mg-9Li-1Zn alloy at different temperatures was simulated, and it was found that the temperature control had an effect on the grain size and temperature field of the sheet. Combined with the experimental analysis, the results showed that the alloy with proper rolling temperature control had fine microstructure and plasticity. Under the conditions of 300 °C for the first pass and 275 °C for the second pass, the β-Li phase was recrystallized dynamically and most of the α-Mg phase was spheroidized. The tensile strength was 233 MPa, and a large number of dimples were produced on the tensile fracture, which was ductile fracture with an elongation of 45%. In addition, according to Gibbs-Thomson theorem and metallographic analysis, the mechanism of α-Mg spheroidization was explained.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Precipitation evolution during annealing of Mg-Li alloys10.1016/j.msea.2017.02.035 ↗
2. Ex-situ EBSD analysis of yield asymmetry, texture and twinning development in Mg-5Li-3Al-2Zn alloy during tensile and compressive deformation10.1016/j.jallcom.2019.07.099 ↗
3. Balance of mechanical properties of Mg-8Li-3Al-2Zn-0.5Y alloy by solution and low-temperature aging treatment10.1016/j.jallcom.2019.03.350 ↗
4. Microstructure and hardness of Mg-9Li-6Al-xLa (x=0, 2, 5) alloys during solid solution treatment10.1016/j.msea.2014.12.014 ↗
5. Hot deformation behavior and processing map of a superlight dual-phase Mg-Li alloy10.1016/j.jallcom.2018.07.024 ↗
6. The hot deformation behavior, microstructure evolution and texture types of as-cast Mg-Li alloy10.1016/j.jallcom.2020.154868 ↗
7. Development of new age hardenable Mg-Li-Sc alloys10.1016/j.jallcom.2018.12.189 ↗
8. Effects of second phases on deformation behavior and dynamic recrystallization of as-cast Mg-4.3Li-4.1Zn-1.4Y alloy during hot compression10.1016/j.jallcom.2018.08.129 ↗
9. Effect of icosahedral phase on the thermal stability and ageing response of a duplex structured Mg-Li alloy[J]10.1016/j.matdes.2014.12.057 ↗
10. Influence of extrusion temperature on microstructure and mechanical behavior of duplex Mg-Li-Al-Sr alloy10.1016/j.jallcom.2018.03.319 ↗
11. Effect of extrusion ratio on microstructure and mechanical properties of Mg-8Li-3Al-2Zn-0.5Y alloy with duplex structure10.1016/j.msea.2017.03.059 ↗
12. Effect of grain refinements on the microstructure and thermal behaviour of Mg-Li-Al alloy10.1007/s10973-018-7223-x ↗
13. Effect of addition of Al-Si eutectic alloy on microstructure and mechanical properties of Mg-12wt%Li alloy10.1016/j.jmst.2018.03.007 ↗
14. Effects of annealing process on the interface of alternate α/β Mg-Li composite sheets prepared by accumulative roll bonding10.1016/j.jmatprotec.2017.11.033 ↗
15. Mechanical properties and microstructural evolution in a superlight Mg-7.28Li-2.19Al-0.091Y alloy fabricated by rolling10.1016/j.jallcom.2018.02.185 ↗
16. Effect of Y and Ce addition on microstructures and mechanical properties of LZ91 alloys10.1016/j.jallcom.2019.06.003 ↗
17. Dynamic recrystallization behavior of Mg-Li-Al-Nd duplex alloy during hot compression10.1016/j.jallcom.2015.03.144 ↗
18. Microstructure and mechanical properties of as-cast and extruded Mg-8Li-1Al-0.5Sn alloy10.1016/j.msea.2017.10.036 ↗
19. Influence of Al and Si additions on the microstructure and mechanical properties of Mg-4Li alloys10.1016/j.msea.2017.06.077 ↗
20. Microstructure and mechanical properties of hot extruded Mg-8.89Li-0.96Zn alloy
21. Microstructural instabilities in metallurgical systems-a review10.1179/msc.1978.12.3.113 ↗
22. Thermal grooving by surface diffusion: a review of classical Thermo-Kinetics approach
23. Theory of thermal grooving10.1063/1.1722742 ↗
24. Gibbs-Thomson effects in phase transformations10.1016/j.scriptamat.2004.12.026 ↗
25. Crystal structure of the hexagonal (Zn, Mg)4Ho and (Zn, Mg)4Er
26. Effect of Li content on microstructure, texture and mechanical behaviors of the as-extruded Mg-Li sheets10.1016/j.msea.2017.05.110 ↗
27. Yield surfaces of BCC crystals for slip on the {110} <111> and {112} <111> systems10.1016/0001-6160(88)90288-X ↗
28. Slip behavior and its effect on rolling texture development in a dual-phase Mg-Li alloy10.1016/j.jallcom.2019.152117 ↗