journal article·2020-08

Effect of powder pre-oxidation on the microstructure and ablation resistance of ZrB2–SiC coating

Shijie Sun, Yanbo Liu, Zhuang Ma, Fuchi Wang, Shizhen Zhu, Jiayi Guo, Changqing Hong

Publisher page

Abstract

Abstract To further improve the densification and properties of ZrB2–SiC coating, the ZrB2–SiC powder was pre-oxidized at different temperatures before plasma spraying. And the ablation property of the obtained coatings were assessed using an oxyacetylene torch flame. A core-shell structure powder was obtained after the pre-oxidation treatment at 800 °C. And the oxidized shell was dense and integral with an uniform thickness. Compared with the IPS-coating, the porosity percent of the corresponding pre-oxidized coating showing a classical lamellar structure decreased from 12.7% to 8.8%. The pre-oxidized coating showed a dense ZrO2 surface with a honeycomb-structure after ablation at 1800 °C for 60s.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Effect of high temperature heat treatment on the ablation of SiC–ZrB2–ZrC particles modified C/C composites in two heat fluxes10.1016/j.jallcom.2014.09.193 ↗
2. Enhancement of the oxidation resistance of C/C composites by depositing SiC nanowires onto carbon fibers by electrophoretic deposition10.1016/j.jallcom.2014.08.209 ↗
3. Reaction kinetics and ablation properties of C/C–ZrC composites fabricated by reactive melt infiltration10.1016/j.ceramint.2010.12.002 ↗
4. Mechanical properties and ablation behavior of C/C-ZrC and C/C-ZrC-SiC composites prepared by precursor infiltration and pyrolysis combined with chemical vapor infiltration10.1016/j.ceramint.2018.09.131 ↗
5. A mullite/SiC oxidation protective coating for carbon/carbon composites10.1016/j.jeurceramsoc.2012.08.009 ↗
6. Oxidation resistant carbon materials derived from boronated carbon–silicon alloys10.1016/j.carbon.2004.07.004 ↗
7. A ZrC-SiC/ZrC-LaB6/ZrC multilayer ablation resistance coating for SiC-coated carbon/carbon composites10.1016/j.surfcoat.2016.12.010 ↗
8. HfB2-SiC-MoSi2 oxidation resistance coating fabricated through in-situ synthesis for SiC coated C/C composites10.1016/j.jallcom.2017.06.008 ↗
9. Preparation and ablation properties of Hf(Ta)C co-deposition coating for carbon/carbon composites10.1016/j.corsci.2012.09.016 ↗
10. SiC nanowire toughened ZrB2–SiC ablative coating for SiC coated C/C composites10.1016/j.ceramint.2015.07.175 ↗
11. In-situ fabrication of ZrB2-SiC/SiC gradient coating on C/C composites10.1016/j.jallcom.2015.05.205 ↗
12. Oxidation mechanism and resistance of ZrB2–SiC composites10.1016/j.corsci.2009.07.005 ↗
13. The ZrB2 volatility diagram10.1111/j.1551-2916.2005.00599.x ↗
14. Ablation resistance of supersonic-atmosphere-plasma-spraying ZrC coating doped with ZrO2 for SiC-coated carbon/carbon composites10.1016/j.corsci.2017.03.019 ↗
15. Ablation resistance of TaC-modified HfC coating prepared by supersonic plasma spraying for SiC-coated carbon/carbon composites10.1016/j.ceramint.2019.06.011 ↗
16. Ablation properties of HfB2 coatings prepared by supersonic atmospheric plasma spraying for SiC-coated carbon/carbon composites10.1016/j.surfcoat.2018.09.060 ↗
17. Ablation behavior of ZrB2-based coating prepared by supersonic plasma spraying for SiC-coated C/C composites under oxyacetylene torch10.1007/s11666-013-9913-z ↗
18. Oxidation behaviour of plasma-sprayed ZrB2-SiC coatings10.1016/j.ceramint.2018.10.157 ↗
19. Ablation mechanism of ZrB2-SiC coating for SiC-coated graphite under an oxyacetylene flame10.1016/j.surfcoat.2018.07.031 ↗
20. Plasma spray deposition and high temperature characterization of ZrB2–SiC protective coatings10.1016/S0257-8972(02)00058-0 ↗
21. The ablation behavior of ZrB2-SiC coating prepared by shrouded plasma spray on SiC-coated graphite10.1016/j.jallcom.2018.01.091 ↗
22. Induction plasma spheroidization of ZrB2-SiC powders for plasma-spray coating10.1016/j.jeurceramsoc.2017.12.061 ↗
23. Thermal barrier coatings for gas-turbine engine applications10.1126/science.1068609 ↗
24. Nanowire-toughened transition layer to improve the oxidation resistance of SiC–MoSi2–ZrB2 coating for C/C composites10.1016/j.corsci.2016.05.013 ↗
25. Thermal spray coatings engineered from nanostructured ceramic agglomerated powders for structural, thermal barrier and biomedical applications: a review10.1007/s11666-006-9010-7 ↗
26. Relationships between the microstructure and properties of thermally sprayed deposits10.1361/105996302770348754 ↗
27. Effect of pre-oxidation on the ablation resistance of ZrB2–SiC coating for SiC-coated carbon/carbon composites10.1016/j.ceramint.2014.11.006 ↗
28. Microstructure and ablation resistance of SiC/Al2O3 composite ceramic coating deposited by APS
29. Preparation and characterization of ZrB2/SiC composite powders by induction plasma spheroidization technology10.1016/j.ceramint.2018.10.008 ↗
30. Research on oxidation characteristics of SiC nano ceramics
31. TEM study of the high-temperature oxidation behavior of hot-pressed ZrB2–SiC composites10.1111/jace.12246 ↗
32. Effects of oxidation temperature, time, and ambient pressure on the oxidation of ZrB2–SiC–graphite composites in atomic oxygen10.1016/j.jeurceramsoc.2016.02.040 ↗
33. Densification and properties of transition metal borides-based cermets via spark plasma sintering10.1016/j.jeurceramsoc.2005.05.011 ↗
34. Effects of Y2O3 on microstructure and mechanical properties of ZrB2–SiC ceramics10.1016/j.jallcom.2007.10.137 ↗
35. High-temperature oxidation at 1900°C of ZrB2–xSiC ultrahigh-temperature ceramic composites10.1111/j.1551-2916.2008.02660.x ↗